Our Products
Compositions %
Aluminum | 0.4 max |
Carbon | 0.1 max |
Chromium | 20 - 23 |
Cobalt | 1 max |
Iron | 5 max |
Manganese | 0.5 max |
Molybdenum | 08/10/12 |
Nickel | Balance |
Niobium | 3.15 - 4.15 |
Phosphorus | 0.015 max |
Silicon | 0.5 max |
Sulphur | 0.015 max |
Titanium | 0.4 max |
Specifications
C | Cr | Cu | Mn | Mo | Ni | P | S | Si |
Max | Max | Max | Max | Max | ||||
0.02 | 19.0-23.0 | 1.0-2.0 | 2.0 | 4.0-5.0 | 23.0-28.0 | 0.045 | 0.035 | 1.0 |
Chemistry
Ni | Cr | Mo | Mn | Si | C | N | S | P | Cb | V | Fe | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
MIN | 11.5 | 20.5 | 1.5 | 4.0 | - | - | 0.2 | - | - | 0.1 | 0.1 | - |
MAX | 13.5 | 23.5 | 3.0 | 6.0 | 1.0 | 0.06 | 0.4 | 0.03 | 0.045 | 0.3 | 0.3 | Balance |
Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
---|---|---|---|---|---|---|---|
17-4 PH | H900 | 190,000 | 170,000 | 10 | 40 | 388 | C40 |
H1025 | 155,000 | 145,000 | 12 | 45 | 331 | C35 | |
H1075 | 145,000 | 125,000 | 13 | 45 | 311 | C32 | |
H1150 | 135,000 | 105,000 | 16 | 50 | 277 | C28 | |
H1150-M | 115,000 | 75,000 | 18 | 55 | 255 | C24 | |
H1150-D | 125,000 | 105,000 | 16 | 50 | 255 min - 311 max | C24 - 33 |
Ni | Fe | Cr | Cu | Mo | Nb |
---|---|---|---|---|---|
32.00-38.00 | Balance | 19.0-21.0 | 3.0-4.0 | 2.0-3.0 | 8xC-1.0max |
C | Mn | P | S | Si | |
---|---|---|---|---|---|
.07max | 2.0max | .045max | .035max | 1.0max | |
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
---|---|---|---|---|---|---|---|
B729 | B464 | B729 | B468 | B463 | B473 | B462 | B366 |
Form | Tensile Min. | Yield Min. (.2% offset) | Elongation Min. | Reduction of Area Min. |
---|---|---|---|---|
Bar (hot or cold finished) | 80 ksi | 35 ksi | 30% | 50% |
Sheet/Plate | 80 ksi | 35 ksi | 30% | - |
Ni | Fe | Cr | Cu | Mo | Nb |
---|---|---|---|---|---|
32.00-38.00 | Balance | 19.0-21.0 | 3.0-4.0 | 2.0-3.0 | 8xC-1.0max |
C | Mn | P | S | Si | |
---|---|---|---|---|---|
.07max | 2.0max | .045max | .035max | 1.0max | |
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
---|---|---|---|---|---|---|---|
B729 | B464 | B729 | B468 | B463 | B473 | B462 | B366 |
Form | Tensile Min. | Yield Min. (.2% offset) | Elongation Min. | Reduction of Area Min. |
---|---|---|---|---|
Bar (hot or cold finished) | 80 ksi | 35 ksi | 30% | 50% |
Sheet/Plate | 80 ksi | 35 ksi | 30% | - |
Product Form |
Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
---|---|---|---|---|---|
Rod & Bar | Annealed | 75-90 | 25-50 | 60-35 | 60-80 |
Rod & Bar | Cold-Drawn Stress Relieved | 84-120 | 55-100 | 40-22 | 85-20 HRC |
Plate | Annealed | 70-85 | 28-50 | 50-35 | 60-76 |
Sheet | Annealed | 70-85 | 30-45 | 45-35 | 65-80 |
Tube & Pipe Seamless | Annealed | 70-85 | 25-45 | 50-35 | 75 max * |
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
---|---|---|---|---|---|---|---|---|
B165 | B725 | B163 | B127 | B164 | B564 | B366 | |
|
C | Mn | S | Si | Ni | Cu | Fe |
---|---|---|---|---|---|---|
.30 max | 2.00 max | .024 max | .50 max | 63.0 min | 28.0-34.0 | 2.50 max |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min | |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min | |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min | |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |
Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
---|---|---|---|---|---|---|---|
15-5 PH | H900 | 190,000 | 170,000 | 6 | 15 | 388 | C40 |
H1025 | 155,000 | 145,000 | 8 | 27 | 331 | C35 | |
H1075 | 145,000 | 125,000 | 9 | 28 | 311 | C32 | |
H1150 | 135,000 | 105,000 | 11 | 30 | 277 | C28 | |
H1150-M | 115,000 | 75,000 | 14 | 35 | 255 | C24 |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |