Our Products
Ni | Fe | Cu | C | Mn | S | Si |
---|---|---|---|---|---|---|
99.0 min | .40 max | .25 max | .15 max | .35 max | .01 max | .35 max |
Ni | Fe | Cu | C | Mn | S | Si |
---|---|---|---|---|---|---|
99.0 min | .40 max | .25 max | .02 max | .35 max | .01 max | .35 max |
Ni | Fe | Cu | C | Mn | S | Si |
---|---|---|---|---|---|---|
99.0 min | .40 max | .25 max | .02 max | .35 max | .01 max | .35 max |
Product Form | Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
---|---|---|---|---|---|
Rod & Bar | Hot Finished | 60-85 | 15-45 | 55-35 | 45-80 |
Rod & Bar | Cold Drawn/Annealed or Hot-Finished/Annealed | 55-75 | 15-30 | 55-40 | 45-70 |
Plate | Hot-Rolled/Annealed | 55-80 | 15-40 | 60-40 | 45-75 |
Sheet | Annealed | 55-75 | 15-30 | 55-40 | 70 max |
Tube & Pipe | Seamless Annealed | 55-75 | 12-30 | 60-40 | 70 max |
Product Form |
Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
---|---|---|---|---|---|
Rod & Bar | Annealed | 75-90 | 25-50 | 60-35 | 60-80 |
Rod & Bar | Cold-Drawn Stress Relieved | 84-120 | 55-100 | 40-22 | 85-20 HRC |
Plate | Annealed | 70-85 | 28-50 | 50-35 | 60-76 |
Sheet | Annealed | 70-85 | 30-45 | 45-35 | 65-80 |
Tube & Pipe Seamless | Annealed | 70-85 | 25-45 | 50-35 | 75 max * |
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
---|---|---|---|---|---|---|---|---|
B165 | B725 | B163 | B127 | B164 | B564 | B366 | |
C | Mn | S | Si | Ni | Cu | Fe |
---|---|---|---|---|---|---|
.30 max | 2.00 max | .024 max | .50 max | 63.0 min | 28.0-34.0 | 2.50 max |
PL Flange |
WN Flange |
SO Flange |
TH Flange |
SW Flange |
LJ Flange |
BL Flange |
Size |
1/2"~48" |
|||||
pressure |
class:150 300 400 600 900 1500 and 2500 pn: 6 10 16 64 and 160,5K-40K |
|||||
Face type |
RF(raised face) M(male face) FM(female face) T(tongue face) G(groove face) RJ(ring joint face)etc. |
|||||
standard |
Domestic Standard: HG20592-20614/HG20615 JB4703/JB4721 SH3406 Foreign Standard: ASME B16.5 /ASME B16.47/ASTM B16.36/ASTM B16.48/DIN/BS/JIS/KS |
|||||
certificate |
ISO9001:2000 |
|||||
packing |
Wooden case or according to customers' requirement |
|
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max | .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 | 0.6 1.2 | 0.2 max | 22.0 min | |
Inconel 825 Sheet / Plate | Inconel 825 Round Bar | Inconel 825 Pipe | Inconel 825 Tube | Inconel 825 Fittings | Inconel 825 Forgings |
ASME SB-424 | ASME SB-425 | ASME SB-423 ASME SB-829 ASME SB-705 ASME SB-775 | ASME SB-163 ASME SB-704 ASME SB-751 | ASME SB-366 | ASME SB-564 |