Ami Polymer Pvt. Ltd.

Mira Road, Mumbai, Maharashtra

Imaseal™ is made from advance grade silicone rubber conforms to FDA 21 CFR 177.2600 for food grade criteria suitable for various sealing applications. These inflatable seals starts inflation range from 5mm to 20mm when 2-4 kg./cm2 pressure is applied after installation in door.

Application :

• Fluid Bed Dryers/Processors/Coaters
• Autoclaves, Sterilizers
• Isolators, Glove Box
• Furnaces
• Rapid Mixer Granulators
• Nuclear Door Seals
• Robotics Fluid Sealing
• Airlock Door Seals
• Powder Bulk Solid Handling Machineries
• Electronic/Wafer Semiconductor Processing

Speciality :

• Fastest Delivery
• Customization
• Diameter Range starts from 100mm
• Ultimate Service

Certifications :

• Confirms to FDA 21 CFR 177.2600
• Lab Test Certificate
• TSE/BSE Free Certificate
• Phthalate/Bisphenol Free Certificate

NOTE : Price vary as per the sizes. Kindly email or call us for best available rate.

Visit us : http://www.amipolymer.com/fbd_gaskets.html

Imaclamp™ - (Silicone/Viton®/EPDM): Made from Platinum Cured Silicone Rubber  Conforms to FDA 21 CFR.177.2600 Conforms to USP Class VI Requirements Animal Derived Ingredient Free Silicone Tri-Clover Gaskets are available with collar for better grip and also without collar Available in Red/Orange/White Transparent colors

Types of Imaclamp™:

• T/C Gaskets
• Mesh T/C Gaskets
• PTFE Envelop Gaskets
• Sensor T/C Gaskets
• Validation T/C Gaskets

Standard Size : Normal Size

• D3
• D4
• D5
• 34
• 27.5
• 10.9
• A (Mini)
• 22
• 17
• 9.5
• 34
• 27.5
• 15.4
• 1”
• 50.5
• 43.5
• 22.8
• 1
• 50.5
• 43.5
• 35.8
• 2”
• 64
• 56.5
• 48.8
• 2
• 77.5
• 70.5
• 60.5
• 3”
• 91
• 83.5
• 73.1
• 4
• 118
• 110
• 96

 

NOTE : Price vary as per the sizes. Kindly email or call us for best available rate.

Visit us : http://www.amipolymer.com/tri_clover_gaskets.html

APPL offers a wide range of cords in silicone rubber ranging from 0.5 mm to 50 mm in square and round sections. These cords are manufactured by step molding process as well as from microwave continuous curing system depending upon the customers requirements. Both of these processes are well advanced and technologically innovate in which, the accurate dimensions, excellent finish consistent physical properties are maintained throughout the length. 

Specifications:

Standard Size Availability Round Cord 
1.0 mm, 2.0 mm, 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm upto 50 mm. Square Cord 6 mm x 6 mm, 8 mm x 8 mm, 10 mm x 10 mm, 12 mm x 12 mm, upto 50 mm x 50 mm.
Strips 25 25 x 0.5 mm, 25 x 1.0 mm, 25 x 2 mm, 25 x 3 mm, 25 x 6 mm 30 x 0.5 mm, 30 x 1.0 mm, 30 x 2 mm, 30 x 3 mm, 30 x 5 mm, 30 x 6 mm 40 x 0.5 mm, 40 x 1.0 mm, 40 x 2.0 mm, 40 x 3.0 mm, 40 x 5.0 mm, 40 x 6.0 mm 50 x 0.5 mm, 50 x 1.0 mm, 50 x 2.0 mm, 50 x 3.0 mm, 50 x 5.0 mm, 50 x 6.0 mm OR as per the requirements of the customers.

NOTE: Price vary as per the sizes. Kindly email or call us for best available rate. 

 

Visit us: http://www.amipolymer.com/silicone_cords_strips_and_gaskets.html

Advantage of EPDM self Adhesive Strip: Easy to install, just peel off the self adhesive backing. The adhesive backing tape used is not fully resistance to water, therefore where there is a large amount of moisture or water present; it is advisable to use plain expanded EPDM a good conduct adhesive. EPDM provide excellent resistance against oil, acid alkalis has good weathering, heat ozone resistance. Highlighted Points: ⢠Small large quantities of EPDM sponge strip available. We are manufacturing EPDM sponge strip in both small runs large runs, so regardless of the size of your order APPL can deliver any size. ⢠EPDM sponge strips is currently supplied in two different colors: Black, White, Gray, Green, Red, Brown, etc. Our EPDM sponge strips compress when pressure is applied to them, meaning that when teo mating surface are put either side of the strip, that a seal is created. ⢠Bespoke custom EPDM sponge strip available. We can produce cut lengths to fit a particular design, or even join standard 25 meter rolls to provide longer roll lengths if required. ⢠Various densities of EPDM sponge strip. Our standard range of EPDM sponge strips are supplied in a medium density, but firm grades as well as softer grades are also readily available depending on the application. Firm grade EPDM sponge strip are supplied mainly when two heavy surfaces are claming down onto the strip, but only little compression is required to seal. NOTE: Price vary as per sizes. Kindly email or call us for best available rate.

Autoclave Gaskets Feature:a. Autoclavable Gaskets for PharmaLab/ Machinefabric/Fedegari or custom built. b. Autoclavable Gasket are also available as inflatable gasket. c. Excellent joint finishing from European technology of manufacturing. NOTE: Price vary as per sizes. Kindly email or call us for best available rate.

We are placed among the noteworthy organizations, engaged in offering high quality Butterfly Valve Gaskets. This is highly suitable for applications that involve medium to large nominal widths generally used in pharmaceutical sectors. These gaskets are widely used in pure open/close applications as clean, fluid gaseous media and low switching frequencies. In order to assure the quality, these gaskets are rigorously tested against several quality parameters. Features:a. Resistance to temperatureb. Resistance to pressurec. Reliable performance