APPL offers it's wide range of O-Rings from 1.0 mm ID to 600 mm ID from its 5000 single piece moulds. APPL's O-Rings are manufactured on a hydraulic press with tightly controlled temperature, pressure and time which ensures accurate dimensions, glossy finish invisible flash line, properly post curedand absolutely defect free articles. These O-Rings are also manufactured as per the dimensional tolerance specified by the customers and available from Nitrile, Neoprene, Silicone, EPDM, Hapalon, NBR, Viton® Butyl Rubber or in any other rubber as per customer's specification. 
We also manufacture Viton® O-Rings from 1mm ID - 3000 mm ID or in any sizes through step moulding process which gives joint less O-Rings of dimensionally accurate excellent workmanship and finish. 

O-Rings Application:
• Filter Housings 
• Membrane Filter Holder 
• Heat Exchangers 
• RMG Discharge Port 
• Pneumatic Cylinders 
• Spray Guns 
• Other Sealing Applications

Polymer Range for O-Rings: 
• Silicone 
• FKM (Viton^®) 
• EPDM 
• Neoprene 
• Nitrile 
• Hypalon

We have in-house CNC VMC machines to manufacture mould.

NOTE: Price vary as per ID OD of O-Rings. Kindly email or call us for best available rate. 

 

Visit us: http://www.amipolymer.com/silicone_o-rings.html

APPL's Silicone, Viton, & EPDM Encapsulated O-Rings with FEP encapsulation are Designed to address the growing problem of sealing in the most hostile chemical and temperature environments. It combines the best qualities of FEP material on the outside With its chemical inertness and an elastomer on the inside for resilience. This unique Combination forms a highly effective, long lasting seal for the most demanding Applications. This O-Rings are comprised of FEP over silicone, Viton or EPDM & can be used in temperatures from -75^o to +400^oF (- 60° to +205^oC) depending upon the choice of elastomer core. Why are Encapsulated 'O'-Rings needed? There are certain applications which prohibit the use of conventional rubber O-ring Seals. The use of hostile chemicals or extreme temperature (both high and low) during various processes can make effective sealing very difficult. The main advantage Encapsulated 'O-Rings have over solid P.T.F.E. is that it has the chemical inertness whilst with its energising core, the O-ring returns to its original form.

Application :

• Agitated natsch Filter Dryer (ANFD)
• Reactors
• Solvent Container LID
• Centrifuge LID

APPL offers it's wide range of O-Rings from 1.0 mm ID to 600 mm ID from its 5000 single piece moulds. APPL's O-Rings are manufactured on a hydraulic press with tightly controlled temperature, pressure and time which ensures accurate dimensions, glossy finish invisible flash line, properly post curedand absolutely defect free articles. These O-Rings are also manufactured as per the dimensional tolerance specified by the customers. We manufacture O-Rings from 1mm ID - 3000 mm ID or in any sizes through step moulding process which gives joint less O-Rings of dimensionally accurate excellent workmanship and finish. O-Rings Application:a. Filter Housings b. Membrane Filter Holder c. Heat Exchangers d. RMG Discharge Port e. Pneumatic Cylinders f. Spray Guns g. Other Sealing Applications We have in-house CNC VMC machines to manufacture mould. NOTE: Price vary as per ID OD of O-Rings. Kindly email or call us for best available rate. Visit us: http://www.amipolymer.com/o-rings.html

APPL offers it's wide range of O-Rings from 1.0 mm ID to 600 mm ID from its 5000 single piece moulds. APPL's O-Rings are manufactured on a hydraulic press with tightly controlled temperature, pressure and time which ensures accurate dimensions, glossy finish invisible flash line, properly post curedand absolutely defect free articles. These O-Rings are also manufactured as per the dimensional tolerance specified by the customers and available from Nitrile, Neoprene, Silicone, EPDM, Hapalon, NBR, Viton® Butyl Rubber or in any other rubber as per customer's specification. 
We also manufacture Viton® O-Rings from 1mm ID - 3000 mm ID or in any sizes through step moulding process which gives joint less O-Rings of dimensionally accurate excellent workmanship and finish. 

O-Rings Application:
• Filter Housings 
• Membrane Filter Holder 
• Heat Exchangers 
• RMG Discharge Port 
• Pneumatic Cylinders 
• Spray Guns 
• Other Sealing Applications

Polymer Range for O-Rings: 
• Silicone 
• FKM (Viton^®) 
• EPDM 
• Neoprene 
• Nitrile 
• Hypalon

We have in-house CNC VMC machines to manufacture mould.

NOTE: Price vary as per ID OD of O-Rings. Kindly email or call us for best available rate. 

 

Visit us: http://www.amipolymer.com/silicone_o-rings.html

APPL's Silicone, Viton, & EPDM Encapsulated O-Rings with FEP encapsulation are Designed to address the growing problem of sealing in the most hostile chemical and temperature environments. It combines the best qualities of FEP material on the outside With its chemical inertness and an elastomer on the inside for resilience. This unique Combination forms a highly effective, long lasting seal for the most demanding Applications. This O-Rings are comprised of FEP over silicone, Viton or EPDM & can be used in temperatures from -75^o to +400^oF (- 60° to +205^oC) depending upon the choice of elastomer core. Why are Encapsulated 'O'-Rings needed? There are certain applications which prohibit the use of conventional rubber O-ring Seals. The use of hostile chemicals or extreme temperature (both high and low) during various processes can make effective sealing very difficult. The main advantage Encapsulated 'O-Rings have over solid P.T.F.E. is that it has the chemical inertness whilst with its energising core, the O-ring returns to its original form.

Application :

• Agitated natsch Filter Dryer (ANFD)
• Reactors
• Solvent Container LID
• Centrifuge LID

APPL offers it's wide range of O-Rings from 1.0 mm ID to 600 mm ID from its 5000 single piece moulds. APPL's O-Rings are manufactured on a hydraulic press with tightly controlled temperature, pressure and time which ensures accurate dimensions, glossy finish invisible flash line, properly post curedand absolutely defect free articles. These O-Rings are also manufactured as per the dimensional tolerance specified by the customers. We manufacture O-Rings from 1mm ID - 3000 mm ID or in any sizes through step moulding process which gives joint less O-Rings of dimensionally accurate excellent workmanship and finish. O-Rings Application:a. Filter Housings b. Membrane Filter Holder c. Heat Exchangers d. RMG Discharge Port e. Pneumatic Cylinders f. Spray Guns g. Other Sealing Applications We have in-house CNC VMC machines to manufacture mould. NOTE: Price vary as per ID OD of O-Rings. Kindly email or call us for best available rate. Visit us: http://www.amipolymer.com/o-rings.html