AMI : Industries's Design and Manufactured Tunnel Ovens for all types of process Conveyorised Oven from 50 to 500 Deg.Cent.

Standard Features :

• Mild Steel/ Stainless Steel/ Ceramic interior depending on working temperature
• Heavy duty variable speed drive with A.C. Motor & A.C. Controller
• Suitable Guiding Roller for Conveyor
• Adjustable opening at loading and unloading zone
• Multiple Heat Zones
• Extended loading and uploading zone
• Extended Cooling Zone for Fast Cooling (if required)

Construction : M.S.Angle Frame

• 40 mm X 40 mm X 5 mm ( Small Size)
• 50 mm X 50 mm X 5 mm ( Big Size)
• 18 Swg. for Temp. up to 250 Deg.c
• 16 Swg. for Temp. up to 450 Deg.c The inside can be in S.S. 304 / S.S. 316 / S.S 310

Door : Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.

Insulation : Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature.

Heating : The oven is heated electrically by specially designed S.S.Tubular/ Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO .

Air Circulation : Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.

Temperature Controller : Temperature inside the Oven is controlled by Thermostate or Digital Temp.controller or PID Controller with Thyristor Power Pack. Depending upon application.

Construction : M.S.Angle Frame

• 40 mm X 40 mm X 5 mm ( Small Size)
• 50 mm X 50 mm X 5 mm ( Big Size)
• 18 Swg. for Temp. up to 250 Deg.c
• 16 Swg. for Temp. up to 450 Deg.c The inside can be in S.S. 304 / S.S. 316 / S.S 310

Door : Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.

Insulation : Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature.

Heating : The oven is heated electrically by specially designed S.S.Tubular/ Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO .

Air Circulation : Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.

Temperature Controller : Temperature inside the Oven is controlled by Thermostate or Digital Temp.controller or PID Controller with Thyristor Power Pack. Depending upon application.

Construction : M.S.Angle Frame

• 40 mm X 40 mm X 5 mm ( Small Size)
• 50 mm X 50 mm X 5 mm ( Big Size)
• 18 Swg. for Temp. up to 250 Deg.c
• 16 Swg. for Temp. up to 450 Deg.c The inside can be in S.S. 304 / S.S. 316 / S.S 310

Door : Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.

Insulation : Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature.

Heating : The oven is heated electrically by specially designed S.S.Tubular/ Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO .

Air Circulation : Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.

Temperature Controller : Temperature inside the Oven is controlled by Thermostate or Digital Temp.controller or PID Controller with Thyristor Power Pack. Depending upon application.

AMI : Industries's Design and Manufactured Tunnel Ovens for all types of process Conveyorised Oven from 50 to 500 Deg.Cent.

Standard Features :

• Mild Steel/ Stainless Steel/ Ceramic interior depending on working temperature
• Heavy duty variable speed drive with A.C. Motor & A.C. Controller
• Suitable Guiding Roller for Conveyor
• Adjustable opening at loading and unloading zone
• Multiple Heat Zones
• Extended loading and uploading zone
• Extended Cooling Zone for Fast Cooling (if required)

Construction : M.S.Angle Frame

• 40 mm X 40 mm X 5 mm ( Small Size)
• 50 mm X 50 mm X 5 mm ( Big Size)
• 18 Swg. for Temp. up to 250 Deg.c
• 16 Swg. for Temp. up to 450 Deg.c The inside can be in S.S. 304 / S.S. 316 / S.S 310

Door : Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.

Insulation : Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature.

Heating : The oven is heated electrically by specially designed S.S.Tubular/ Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO .

Air Circulation : Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.

Temperature Controller : Temperature inside the Oven is controlled by Thermostate or Digital Temp.controller or PID Controller with Thyristor Power Pack. Depending upon application.

Construction : M.S.Angle Frame

• 40 mm X 40 mm X 5 mm ( Small Size)
• 50 mm X 50 mm X 5 mm ( Big Size)
• 18 Swg. for Temp. up to 250 Deg.c
• 16 Swg. for Temp. up to 450 Deg.c The inside can be in S.S. 304 / S.S. 316 / S.S 310

Door : Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.

Insulation : Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature.

Heating : The oven is heated electrically by specially designed S.S.Tubular/ Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO .

Air Circulation : Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.

Temperature Controller : Temperature inside the Oven is controlled by Thermostate or Digital Temp.controller or PID Controller with Thyristor Power Pack. Depending upon application.

Construction : M.S.Angle Frame

• 40 mm X 40 mm X 5 mm ( Small Size)
• 50 mm X 50 mm X 5 mm ( Big Size)
• 18 Swg. for Temp. up to 250 Deg.c
• 16 Swg. for Temp. up to 450 Deg.c The inside can be in S.S. 304 / S.S. 316 / S.S 310

Door : Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.

Insulation : Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature.

Heating : The oven is heated electrically by specially designed S.S.Tubular/ Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO .

Air Circulation : Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.

Temperature Controller : Temperature inside the Oven is controlled by Thermostate or Digital Temp.controller or PID Controller with Thyristor Power Pack. Depending upon application.