Push rods are made from various material Forged.Steel rod.Aluminum.Tubes. For competitors required to run mechanical fuel pumps. Push rods are inlaid at each end with the same diamond hard material used successfully for lifters. They will not wear the cam or the rod. Our push rods for lifting the valves are made of .080 wall molly steel and are swaged at both ends for a precision fit into the rocker and lifters.

Focusing briefly upon our production unit, we have a plant equipped with state-of-the-art machines with the latest and advanced CNC technology. We have our own forging plant giving us wide range of Valve manufactured from 4 to 20 mm stem dia and 25 to 250 mm head dia and up to 500 mm length. We have a Research & Development Department, process control and 100% inspection of each and every product we produce.

Ameera Exports manufacture Valve Tappet/Lifters from Chilled Casting and Forgings of SAE 8620 Material as the requirement be. Tappets are manufactured on Special Purpose Machines Imported from Schufflers GMBH (GERMANY) which gives us the best result in terms of reliability and Dimensional Tolerance. We are giving the crowning on the wear face of the Tappet for 10 microns which is just a dream for our competitors who follow the crowning of 50 microns. All of our Tappets are MIRROR CNC GRINDED on the wear face which gives the better edge to the Lobes of the Cam Shaft.

Ameera Exports proudly sells tappets to the MOST FAMOUS RACING TEAMS OF THE WORLD. We provide 100% accuracy for the Racing Tappet and we are giving the Hardness of 65 HRC on the wear face of the Lifters to give extra durability.

Material and Hardness

Tappets are made from Precision Investment Wax Casting, Chilled Casting, Forging of En-9 and SAE 8620 material. The hardness given to all the tappets are above 58-60 so as to prevent the wear face wear out.

Crowning

we are giving the crowning on the wear face of the Tappet for 10 microns which is just a dream for our competitors who follow the crowning of 50 microns.

Machines

Tappets are manufactured on Special Purpose Machines Imported from Shufflers GMBH (GERMANY) which gives us the best result in terms of reliability and Dimensional Tolerance. All of our Tappets are MIRROR CNC Grinded on the wear face which gives the better edge to the Lobes of the Cam Shaft.

Applications

Ameera Exports, proudly sells tappets to the MOST FAMOUS RACING TEAMS OF THE WORLD. We provide 100% accuracy for the Racing Tappet, and we are giving the Hardness of 65 HRC on the wear face of the Lifters to give extra durability. We are making tappets for Racing applications having EDM Holes of 0.32 specially for the oil circulations. All the other Applications for Cars , Trucks and Tractors series.

Ameera Exports have more than 300 different Connecting Rods developed for various Cars, Trucks and Tractor Engines.

Special Connecting Rods are developed according to the specified design for Motorcycle, Motorcross, Water Craft, Chain Saw, Generator and various Marine Applications.

Connecting Rods transforms the circular motion of Crankshaft into reciprocal motion thereby moving the piston to create the compressive strength to start and accelerate the Engine.

Material used for Connecting Rods are

CK 45En-16En-942CR M04Pressure Dye Cast Aluminum

Quality

Process inspection is carried out at all operational stages of production as per process control plan by experienced Q.C. Engineers. Latest instruments (duly calibrated) are used for inspection at all stages, like micro meters, precision height gauges, dial bore gauges having least count of 1 micron, go & nogo plug gauges, 3D - Co-ordinate Measurement Machine (CNC Version) Thread plug gauges etc. Forgings, bolts, nuts, bushes & dowel pins are checked as per control plan for dimensional & metallurgical aspects. We have fully equipped laboratory where chemical analysis, micro structure & hardness are checked as per IS or CUSTOMERS standards.

Push rods are made from various material Forged.Steel rod.Aluminum.Tubes. For competitors required to run mechanical fuel pumps. Push rods are inlaid at each end with the same diamond hard material used successfully for lifters. They will not wear the cam or the rod. Our push rods for lifting the valves are made of .080 wall molly steel and are swaged at both ends for a precision fit into the rocker and lifters.

Focusing briefly upon our production unit, we have a plant equipped with state-of-the-art machines with the latest and advanced CNC technology. We have our own forging plant giving us wide range of Valve manufactured from 4 to 20 mm stem dia and 25 to 250 mm head dia and up to 500 mm length. We have a Research & Development Department, process control and 100% inspection of each and every product we produce.

Ameera Exports manufacture Valve Tappet/Lifters from Chilled Casting and Forgings of SAE 8620 Material as the requirement be. Tappets are manufactured on Special Purpose Machines Imported from Schufflers GMBH (GERMANY) which gives us the best result in terms of reliability and Dimensional Tolerance. We are giving the crowning on the wear face of the Tappet for 10 microns which is just a dream for our competitors who follow the crowning of 50 microns. All of our Tappets are MIRROR CNC GRINDED on the wear face which gives the better edge to the Lobes of the Cam Shaft.

Ameera Exports proudly sells tappets to the MOST FAMOUS RACING TEAMS OF THE WORLD. We provide 100% accuracy for the Racing Tappet and we are giving the Hardness of 65 HRC on the wear face of the Lifters to give extra durability.

Material and Hardness

Tappets are made from Precision Investment Wax Casting, Chilled Casting, Forging of En-9 and SAE 8620 material. The hardness given to all the tappets are above 58-60 so as to prevent the wear face wear out.

Crowning

we are giving the crowning on the wear face of the Tappet for 10 microns which is just a dream for our competitors who follow the crowning of 50 microns.

Machines

Tappets are manufactured on Special Purpose Machines Imported from Shufflers GMBH (GERMANY) which gives us the best result in terms of reliability and Dimensional Tolerance. All of our Tappets are MIRROR CNC Grinded on the wear face which gives the better edge to the Lobes of the Cam Shaft.

Applications

Ameera Exports, proudly sells tappets to the MOST FAMOUS RACING TEAMS OF THE WORLD. We provide 100% accuracy for the Racing Tappet, and we are giving the Hardness of 65 HRC on the wear face of the Lifters to give extra durability. We are making tappets for Racing applications having EDM Holes of 0.32 specially for the oil circulations. All the other Applications for Cars , Trucks and Tractors series.

Ameera Exports have more than 300 different Connecting Rods developed for various Cars, Trucks and Tractor Engines.

Special Connecting Rods are developed according to the specified design for Motorcycle, Motorcross, Water Craft, Chain Saw, Generator and various Marine Applications.

Connecting Rods transforms the circular motion of Crankshaft into reciprocal motion thereby moving the piston to create the compressive strength to start and accelerate the Engine.

Material used for Connecting Rods are

CK 45En-16En-942CR M04Pressure Dye Cast Aluminum

Quality

Process inspection is carried out at all operational stages of production as per process control plan by experienced Q.C. Engineers. Latest instruments (duly calibrated) are used for inspection at all stages, like micro meters, precision height gauges, dial bore gauges having least count of 1 micron, go & nogo plug gauges, 3D - Co-ordinate Measurement Machine (CNC Version) Thread plug gauges etc. Forgings, bolts, nuts, bushes & dowel pins are checked as per control plan for dimensional & metallurgical aspects. We have fully equipped laboratory where chemical analysis, micro structure & hardness are checked as per IS or CUSTOMERS standards.