Our Products
Flow Meters
2 Products availableIndustrial & Engineering Products
2 Products availableLift Check Valves
2 Products availableHardware Fittings And Accessories
1 Products availableRoad Safety & Traffic Products
1 Products availableAutomotive Spare Parts
1 Products availableWe are leaders in the market for providing best range of Union Bonnet Globe Valve, Screwed Ends Gun Metal Globe Valve, Bronze Thermodynamic Steam Trap, Gun Metal Needle Valve and Gun Metal Globe Steam Stop Valve
Union bonnet, Inside screw, Rising stem, S.S. trim, Renewable seat/discFlanged ends BS-10 Table-FProduct Standard : BS 5154
Test Pressure
| Nominal Size (mm) | FF | H | ØW | ØFD | FT | K | n | Ød |
|---|---|---|---|---|---|---|---|---|
| 15 | 83 | 136 | 64 | 3.3/4″ | 5/16″ | 2.5/8″ | 4 | 9/16″ |
| 20 | 93 | 156 | 71 | 4″ | 5/16″ | 2.7/8″ | 4 | 9/16″ |
| 25 | 115 | 168 | 86 | 4.3/4″ | 3/8″ | 3.7/16″ | 4 | 11/16″ |
| 32 | 118 | 180 | 96 | 5.1/4″ | 3/8″ | 3.7/8″ | 4 | 11/16″ |
| 40 | 137 | 225 | 118 | 5.1/2″ | 7/16″ | 4.1/8″ | 4 | 11/16″ |
| 50 | 185 | 248 | 148 | 6.1/2″ | 7/16″ | 5″ | 4 | 11/16″ |
| 65 | 208 | 285 | 148 | 7.1/4″ | 1/2″ | 5.3/4″ | 8 | 11/16″ |
| 80 | 224 | 325 | 197 | 8″ | 9/16″ | 6.1/2″ | 8 | 11/16″ |
| 100 | 243 | 390 | 197 | 9″ | 11/16″ | 7.1/2″ | 8 | 11/16″ |
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Body | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 2 | Seat Ring | Stainless Steel | ASTM A 276 TYPE 410 / IS 6603 |
| 3 | Disc | Stainless Steel | ASTM A 276 TYPE 410 / IS 6603 |
| 4 | Disc Nut | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 5 | Bonnet | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 6 | Gland Nut | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 7 | Gland | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 8 | Stem | Stainless Steel | ASTM A 276 TYPE 410 / IS 6603 |
| 9 | Packing | Graphited Asbestos | – |
| 10 | Handwheel | Cast Iron | BS 1452 Gr. GJL220 / IS 210 Gr. FG220 |
| 11 | Washer | Carbon Steel | – |
| 12 | Handwheel Nut | Carbon Steel | – |
Screwed in bonnet, Inside screw, Rising stem, Integral seatScrewed female BSP parallel threads to BS-21Product Standard : BS 5154
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Body | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 2 | Disc (Guided Type) | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 3 | Disc Nut | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 4 | Bonnet | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 5 | Gland Nut | Gun Metal | BSEN 1982 Gr. CC491K / IS 318 Gr. LTB2 |
| 6 | Gland | Gun Metal / Brass | BSEN 1982 Gr. CC491K / – |
| 7 | Stem | H.T. Brass | BS 2874 Gr. CZ 121 / IS 6912 Gr. FLB |
| 8 | Packing | Graphited Asbestos | – |
| 9 | Handwheel | Cast Iron | BS 1561 Gr. GJL 220 / IS 210 Gr. FG 220 |
Thermodynamic Type with Inbuilt Strainer, S.S. TrimScrewed female BSP parallel threads to BS-21
Test Pressure
Screwed in bonnet, Inside screw, Rising stem, Integral seatScrewed female BSP parallel threads to BS-21
Test Pressure
Screwed in Bonnet , Inside Screw, Rising Stem , S.S. trim, Renewable seat & discScrewed female BSP parallel threads to BS-21Product Standard : BS 5154
Test Pressure
Spring Loaded, Open Discharge, Cu-Alloy trim, Straight PatternScrewed Male Inlet BSP parallel threads to BS-21
Test Pressure
Gland Packed Fitted with Taper Plug in a Tapper Seated BodyScrewed Female BSP Parallel Threads (BS-21)
Test Pressure
Screwed in Bonnet, Inside Screw, Rising Steam, Hand Wheel Operated, Integral Seat, Cu-Alloy TrimInlet Flange to BS-10 Table-D & Outlet screwed Female ends to BS-21
Test Pressure
Screwed in Bonnet, O/S & Yoke Type, Rising Stem, Integral Seat , Renewable Disc, Cu-Alloy TrimScrewed Female Threads toIS-554(Parallel)Product Standard : IS-778
Test Pressure
Screwed in Bonnet, Inside Screw, Rising Stem, Renewable Seat & Disc, SS TrimScrewed Female BSP Taper Threads (BS-21)
Test Pressure
Outside Screw, Yoke Type, Rising Stem, Screwed in Bonnet/ Bolted Bonnet, Renewable Seat & Disc, SS TrimFlanges as per BS-10 Table F FF (Undrilled)
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Body | Bronze | IBR 282 (a) (iv) Gr. B / BSEN 1982 Gr. CC 491 K |
| 2 | Body Seat Ring | Stainless Steel | ASTM A276 TYPE 410 |
| 3 | Disc | Stainless Steel | ASTM A276 TYPE 410 |
| 4 | Disc Nut | Bronze | IBR 282 (a) (iv) Gr. B / BSEN 1982 Gr. CC 491 K |
| 5 | Gasket | CAF | – |
| 6 | Packing | Graphited Asbestos | – |
| 7 | Studs & Nuts | Carbon Steel | – |
| 8 | Gland Flange | Bronze | IBR 282 (a) (iv) Gr. B / BSEN 1982 Gr. CC 491 K |
| 9 | Bonnet | Bronze | IBR 282 (a) (iv) Gr. B / BSEN 1982 Gr. CC 491 K |
| 10 | Stem | Stainless Steel | ASTM A276 TYPE 410 |
| 11 | Handwheel | Cast Iron | EN 1561 Gr. GJL – 200 |
| 12 | Washer | Carbon Steel | – |
| 13 | Handwheel Nut | Carbon Steel | – |
| 14 | Gland Studs & Nuts | Carbon Steel | – |
BoltedBonnet, Outside Screw &Yoke Type, Rising Stem with Backseat Arrangement, Renewable Seat & Disc, S.S.TrimFlanged as perBSEN 1092-2 PN-10
Test Pressure
Bolted Bonnet, Outside Screw & Yoke Type, Rising Stem with Backseat Arrangement, Renewable Seat & Disc, SS TrimFlanges as perBSEN 1092-2 PN-16
Test Pressure
Renewable S.S. working parts
Test Pressure300 Psi g (Hyd.)Working pressure suitable saturated steam upto 150 Psi g
Two Piece Design, Full Bore, Lever Operated (Blow Out Proof Stem), Renewable Seat, SS TrimScrewed Female BSP Parallel Threads (BS-21)
Test Pressure
Three Piece Design, Lever Operated (Blow Out Proof Stem), Renewable Seat, SS TrimFlanged End to BS-10 Table F (Undrilled)
Test Pressure
Full Bore, Two Piece Design, Renewable Seat, SSTrim, Mix EndInlet Screwed Female & Outlet Screwed Male BSP Parallel Threads (BS-21)
Test Pressure
Two Piece Design, Full Bore, Renewable Seat, SS 316 TrimScrewed Female Ends to BSP/BSPT/NPT/Socket welded ends to ASME B16.11
Test Pressure
