Our Products
Lift Check Valves
2 Products availableFlow Meters
2 Products availableIndustrial & Engineering Products
2 Products availableAutomotive Spare Parts
1 Products availableHardware Fittings And Accessories
1 Products availableRoad Safety & Traffic Products
1 Products availableOur product range contains a wide range of Gun Metal Feed Check Valve, Gun Metal Angle Check Valve, Flanged Ends Gun Metal Gate Valve, Bronze Swing Check Valve and gun metal foot valve
Screwed in cover, Integral seat, Vertical lift, Right angle patternScrewed male BSP parallel threads as per BS-21
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Disc | Gun Metal | BSEN 1982 Gr. CC491K |
| 2 | Body | Gun Metal | BSEN 1982 Gr. CC491K |
| 3 | Cover | Gun Metal | BSEN 1982 Gr. CC491K |
Screwed in cover, Integral seat, Angle pattern, Screwed female BSP parallel threads as per BS-21
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Body | Gun Metal | BSEN 1982 Gr. CC491K |
| 2 | Disc | Gun Metal | BSEN 1982 Gr. CC491K |
| 3 | Cover | Gun Metal | BSEN 1982 Gr. CC491K |
Screwed in bonnet, Inside screw, Non-Rising stemFlanged ends to BS-10 Table-D (Undrilled)
Test Pressure
Screwed in cover, Integral Seat
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Body | Bronze | BSEN 1982 Gr. CC491K |
| 2 | Disc | Bronze | BSEN 1982 Gr. CC491K |
| 3 | Hinge Pin | H.T. Brass | – |
| 4 | Cover | Bronze | BSEN 1982 Gr. CC491K |
| 5 | Hinge | Bronze | BSEN 1982 Gr. CC491K |
| 6 | Nut | Brass | – |
| 7 | Washer | Brass | – |
Vertical lift, Rubber seat with metallic strainer, Integral seat, Cu-Alloy trimScrewed female BSP parallel threads as per BS-21
Test Pressure
Spring loaded, With soft seatScrewed female BSP parallel threads as per BS-21
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Lever | Gun Metal | BSEN 1982 Gr. CC491K |
| 2 | Bracket | Gun Metal | BSEN 1982 Gr. CC491K |
| 3 | Locking Nut | Gun Metal | BSEN 1982 Gr. CC491K |
| 4 | Stem | Brass | IS 6912 Gr. FLB / DIN 12164 Gr. CW721R |
| 5 | Body | Gun Metal | BSEN 1982 Gr. CC491K |
| 6 | Disc | Rubber / Teflon | – |
| 7 | Disc Holder | Gun Metal | BSEN 1982 Gr. CC491K |
| 8 | Gasket | PTFE | – |
| 9 | Bottom Cover | Gun Metal | BSEN 1982 Gr. CC491K |
| 10 | Spring | Spring Steel | – |
| 11 | O – Ring | Rubber | – |
Vertical Lift, Metallic Strainer without Spring, Integral Metallic DiscScrewed Female BSP Parallel Threads (BS-21)
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Body | Gun Metal | BSEN 1982 Gr. CC491K |
| 2 | Disc | Gun Metal | BSEN 1982 Gr. CC491K |
| 3 | Cage | Gun Metal | BSEN 1982 Gr. CC491K |
Wafer Type, Without Lugs, Renewable Linear Seat, EPDM LinearSuitable for Insertion between Flanges as per ANSI B 16.1 Cl-125, DIN ND-10 & BS-10 TableEProduct Standard : IS-13095
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Lever Assembly | Carbon Steel | – |
| 2 | Packing Ring | PTFE | – |
| 3 | Body | Cast Iron | IS 210 Gr. FG 200 |
| 4 | Upper Stem | Stainless Steel | ASTM A276 TYPE 410 |
| 5 | Bush | Bronze | ASMA B62 |
| 6 | Body Liner | EPDM (Renewable) | – |
| 7 | Disc | Cast Stainless Steel | ASTM A351 Gr. CF8 |
| 8 | Lower Stem | Stainless Steel | ASTM A276 TYPE 410 |
| 9 | O – Ring | Nitrile Rubber | – |
| 10 | Bottom Cover | Cast Iron | IS 210 Gr. FG 200 |
| 11 | L – Key Screw | Carbon Steel | – |
| 12 | Gear Box | Cast Iron | IS 210 Gr. FG 200 |
Non-Return valve, With swing type discSuitable for insertion between Flanges as per ANSI B16.1 CL-125, DIN ND-10
Test Pressure
Bolted Bonnet Inside Screw, Non-Rising Stem, Renewable Seat, Solid WedgeFlanged ends as per IS-1538 Table-4Product Standard : IS-14846
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Screw | Carbon Steel | – |
| 2 | Handwheel / Cap | Cast Iron | IS 210 Gr. FG200 |
| 3 | Stem | Stainless Steel | IS 6603 Gr. 12CR. 12 / IS 6604 Gr.04 CR.19NI09 |
| 4 | Gland | Cast Iron | IS 210 Gr. FG 200 |
| 5 | Gland Packing | Hemp & Jute / Rubber | IS 5414 / IS 638 TYPE B |
| 6 | Bonnet | Cast Iron | IS 210 Gr. FG200 |
| 7 | Thrust Plate (If Any) | Cast Iron | IS 210 Gr. FG200 |
| 8 | Bolts / Nuts | Carbon Steel | IS 1363 PART 1 / IS 1363 PART 3 |
| 9 | Body | Cast Iron | IS 210 Gr. FG200 |
| 10 | Wedge Nut | Leaded Tin Bronze | IS 318 Gr. LTB2 |
| 11 | Wedge | Cast Iron | IS 210 Gr. FG200 |
| 12 | Body Seat Ring | Leaded Tin Bronze | IS 318 Gr. LTB2 |
| 13 | Wedge Ring | Leaded Tin Bronze | IS 318 Gr. LTB2 |
| 14 | Gasket | Rubber | IS 638 TYPE B |
Bolted Cover, Renewable Seat & DiscFlanged as per IS-1538 Table-4Product Standard : IS-5312 Part-1
Test Pressure
Bolted Cover, Renewable disc & seat ringFlanged as per IS 1538 (Drilled) Table-4, PN-1.6Product Standard : IS 5312 (Part1)
Test Pressure
| P.No. | Name of Part | Material | Specification |
|---|---|---|---|
| 1 | Cover | Cast Iron | IS 210 Gr. FG200 |
| 2 | Bolts & Nuts | Carbon Steel | IS 1363 (Part 1) / IS 1363 (Part 3) |
| 3 | Gasket | Rubber | IS 638 TYPE B |
| 4 | Hinge Pin | H.T. Brass | IS 320 Gr. HT2 |
| 5 | Disc Ring | Leaded Tin Bronze/ Neoprene Rubber | IS 318 Gr. LTB 2 / – |
| 6 | Body Seat Ring | Leaded Tin Bronze | IS 318 Gr. LTB 2 |
| 7 | Body | Cast Iron | IS 210 Gr. FG200 |
| 8 | Hinge | Cast Iron | IS 210 Gr. FG200 |
| 9 | Disc | Cast Iron | IS 210 Gr. FG200 |
Screwed in Bonnet, O/S & Yoke Type, Rising Stem, Integral Seat, Solid Wedge, Cu-Alloy TrimScrewed Female Threads to IS-554 (Parallel)Product Standard : IS-778
Test Pressure
Wafer type, Spring loaded, Resilient seated (EPDM/Nitrile)Clamping between flanges as per ASME ANSI B 16.1, Class 125Product Standard : API-594
Test Pressure
Compact size, Piston typeScrewed female BSP threads to BS-21
Test Pressure
Screwed in Cover, Renewable Seat & Disc, SS TrimScrewed Female BSP Taper Threads (BS-21)
Test Pressure
Spring Loaded, Outlet Pressure Range Available 5/60, 20/80 & 40/125 PSIG, Cu-Alloy TrimScrewed Female BSP Taper Threads(BS-21)
Test Pressure
Enclosed dischargeInletScrewed male BSP taper threads as per BS-21
Test Pressure
Pop Type, Spring Loaded, Open Discharge, Cu-Alloy TrimInlet Screwed Male BSP Taper Threads (BS-21)
Test Pressure
Outside Screw, Yoke Type, Screwed in bonnet / Bolted Bonnet, Rising Stem, Renewable Seat & Disc, SS TrimScrewed Female BSP Taper Threads (BS-21)
Test Pressure
Outside Screw, Yoke Type, Screwed in bonnet / Bolted Bonnet, Rising Stem, Renewable Seat & Disc, SS TrimScrewed Female BSP Taper Threads (BS-21)
Test Pressure
Bolted Bonnet, O/SScrew & Yoke Type, Rising Stem, Straight Inlet/Curved Inlet, Without Inspection Branch, Renewable Seat & Disc, SS TrimFlanges as perBS-10 Table F FF (Undrilled)
Test Pressure
Bolted Bonnet, O/S & Yoke Type, Rising Stem, Renewable Seat, Solid or Flexible Wedge , SS 316 TrimFlanges as per ASME B16.5, CLass-300 RF (Drilled)Product Standard: BS-1414/API-600
Test Pressure
Bolted Cover, Renewable Seat, SS 316 TrimFlanges as per ASME B16.5, Class-150 RF (Drilled)Product Standard: BS-1868
Test Pressure
Reduced Bore, Bolted Bonnet, O/S & Yoke Type, Rising Stem, Renewable Seat, Solid Wedge, SS TrimSocket Welded Ends as Per ASME B-16.11Product Standard : API-602/ EN-15761
Test Pressure
Two Piece Design, Lever Operated (Blow Out Proof Stem), Renewable SeatScrewed Female BSP Parallel Threads (BS-21)
Test Pressure
