Our Products
AMBICAFLEX Strip wound interlock hose is a high-quality, general purpose hose construct from a single strip of metal that is profiled and interlocked itself. The interlocked section of strips isable to slide back and forth, providing ability to flex.
1. STRIP WOUND INTERLOCK HOSE WITH PACKING
a. CONSTRUCTION MATERIAL:
b. PACKING OPTION
c. APPLICATION:
a. CONSTRUCTION MATERIAL:
b. APPLICATION:
Nominal Inside Diameter MM (Inch) | Minimum Bend Radius MM (Inch) | Maximum Test Pressure Kg/Cm² | Maximum Working Pressure Kg/Cm² |
40 (1 ½”) | 300 (12”) | 21 | 14 |
50 (2”) | 400 (16”) | 15.5 | 10.5 |
63 (2 ½”) | 490 (19.5”) | 15.5 | 10.5 |
75 (3”) | 530 (21”) | 15.5 | 10.5 |
100 (4”) | 580 (23”) | 15.5 | 10.5 |
125 (5”) | 885 (35”) | 15.5 | 10.5 |
150 (6”) | 990 (39”) | 14 | 9 |
200 (8”) | 1397 (55”) | 8 | 5.5 |
250 (10”) | 1495 (59”) | 7 | 3.5 |
300 (12”) | 1700 (67”) | 7 | 3.5 |
1. CONSTRUCTION
AMBICAFLEX stainless steel corrugated hose construct from stainless steel strip that is rolled and the edges welded together to form a thin-walled, gas-tight tube. After the tube has been welded, corrugations are formed into the tube to make it flexible. Corrugations are formed into the tube either mechanically or hydraulically (Hydro forming).
2. CORRUGATION PROFILE
There are two corrugation profiles, annular and helical.
a. ANNULAR PROFILE
In the Annular Profile Independent corrugations, straight and parallel.
b. HELICAL PROFILE
In the Helical Profile One continuous corrugation that spirals around the hose
3. WIRE BRAIDING
To give corrugated hose the ability to withstand pressure, stainless steel wire is braided over the hose. Hoses may be single braided (one layer of braid) or double braided (two layers of braid) to achieve even greater working pressures. Braided braid is used on large-diameter hose. Designing the proper braid for each type of corrugated hose requires sophisticated engineering to maintain the proper balance between the braid strength and the hose’s flexibility.
4. CONSTRUCTION MATERIAL OF HOSE
5. CONSTRUCTION MATERIAL OF WIRE BRAIDING
6. APPLICATION
7. ANUULAR CORRUGATED HOSE SPECIFICATION
Nominal Inside Diameter MM (Inch) | Minimum Bend Radius MM (Inch) | No. Of Braid | Maximum Working Pressure Kg/Cm² | ||||||
6 (¼") | 110 (4 ½") |
|
|
||||||
12 (½") | 135 (5 ½") |
|
|
||||||
19 (¾") | 200 (8") |
|
|
||||||
25 (1") | 225 (9") |
|
|
||||||
32 (1 ¼") | 250 (10") |
|
|
||||||
40 (1 ½") | 275 (11") |
|
|
||||||
50 (2") | 325 (13") |
|
|
||||||
63 (2 ½") | 400 (16") |
|
|
||||||
75 (3") | 450 (18") |
|
|
||||||
100 (4") | 550 (22") |
|
|
||||||
125 (5") | 700 (28") |
|
|
||||||
150 (6") | 800 (32") |
|
|
||||||
200 (8") | 725 (29") |
|
|
||||||
250 (10") | 850 (34") |
|
|
||||||
300 (12") | 1100 (44") |
|
|
8. HELICAL CORRUGATED HOSE SPECIFICATION
Nominal Inside Diameter MM (Inch) | Minimum Bend Radius MM (Inch) | No. Of Braid | Maximum Working Pressure Kg/Cm² | ||||||
6 (¼") | 55 (2 ¼") |
|
|
||||||
12 (½") | 75 (3") |
|
|
||||||
19 (¾") | 125 (5") |
|
|
||||||
25 (1") | 225 (9") |
|
|
||||||
32 (1 ¼") | 155 (6 ¼") |
|
|
||||||
40 (1 ½") | 235 (9 ½") |
|
|
||||||
50 (2") | 275 (11") |
|
|
AMBICAFLEX exhaust hose is line of manufacturing strip wound interlock hose without packing for automotive or industrial exhaust system. AMBICAFLEX have exclusively manufacture exhaust hose with added flexibility, highly durable and absorb have vibration exclusively for exhaust application in various industry.
TYPE
1. CONTRUCTION MATERIAL:
2. APPLICATION: