Ahmedabad, Gujarat, India
GST : 24AEOPT8221Q1ZO
Verified
Add Review
Our Products
Pump Specification :
Type : Hydrostatic Test Pump (Electric Motor Driven)
Modal No : AMTMH 70 (HSN :- 84139110)
Make : AMBICA
Suction Size : 3/8 Pipe with Inch BSP Connection
Discharge Size :- 3/8 Pipe with Inch BSP Connection
Capacity
Pressure up to :- 0- 70 kg/cm2 (Max 1000 PSI)
Capacity (LPH) :- 180
Plunger : SINGLE PLUNGER
Pump Drive : Belt Drive
Plunger Size : 18 mm
Pump RPM :- 350
Motor Details :- 1 HP /1440 RPM AMBICA Make
Foot Mounted, 50 Hz, 415 V, (NON - FLP Motor) 3 Phase, AC Supply with F Class Insulation, Frame Size : -80 (Fan Cooled Squirrel Cage NON - Flameproof Motor)
Material Of Construction :-
1. Plunge MOC :- Made from Stainless Steel 316
2. Crank Shaft :- Made from EN 9
3. Crank Case :- Made from ghun Metal
4. Valve Sheet :- Made from Brass Metal
5. Cylinder Body :- Made from mild steel with G.M. Bush inside
6. N.R.V . :- Made form Stainless Steel 304 material
Suitable for 70 Bar Capacity
7. Pump Stand :- Made from Mild Steel 3 X 1 C Channel
with power coated
8. Distributor Body :- Made from Stainless Steel 304 material
9. Pump Air Chamber :- Made from Stainless Steel 304 material
10. Pressure Set Valve :- Made from Stainless Steel 304 material,
Suitable for 70 Bar Capacity
11. Bypass Valve :- Made from Stainless Steel 304 material, Suitable for 70 Bar Capacity
12 Pressure Release Cock :- Made form Stainless Steel 304 material Suitable for 70 Bar Capacity
13 Suction Valve :- Made form Stainless Steel 304 material
Standard Accessories with MOC :-
1 Discharge Pressure hose with attachment of BSP Length 2 Mtrs.
2 Dial Pressure gauge with 4 Inch Dial MAKE ;- Micro Presser Control (With Certificate) Made from SS
3 Suction pipe with Inch BSP Connection 1 Mtrs.
4 Pump plunger size :- 18 mm and made from Stainless Steel
5 Pulley Made from Cast Iron and V Belt
6 Pump supply with suitable trolley with four wheel Mounted (Pump Handel Made from Mild Steel Material)
Pump Paint :- PU Paint
Additional Information:
Packaging Details : Stander Wooden Box
Delivery Time : 2 Days
A centrifugal pump is also known as a Hydrodynamic pump or dynamic pressure pump. It works on the principle of centrifugal force, which are usually quick to install and easy to repair.
Ambica Machine Tools is among the largest Centrifugal Pumps manufacturers and suppliers in India.We manufacture, supply and trade excellent Centrifugal Pump. We are using latest technology in order to meet variegated demands of our patron. Our pumps are used in chemical industries, laminates industries, rubber industries, textile industries, power stations, handing of hydrocarbons, in industries such as fertilizers, water desalination plants.
SPECIAL FEATURES
| MODULAR CONSTRUCTION, HIGH INTERCHANGEABILITY, FAST DELIVERY. | |||
| VERSATILE SHAFT SEALING ARRANGEMENT, GLAND PACKING AS A STANDARD ARRANGEMENT AND OPTION TO USE MECHANICAL SEAL. | |||
| PROCESS TYPE DESIGN RESULTS IN MINIMUM DOWNTIME. | |||
| BACK PULL-OUT DESIGN ENABLING EASIER REMOVAL FOR INSPECTION AND MAINTENANCE. | |||
| CLOSED IMPELLER ENSURES HIGH EFFCIENCY FOR A LONG PERIOD OPERATION. | |||
| PUMP COMES IN 3 BEARING DESIGN RESULTING GOOD CONTINUOUS PROCESS WITH HIGH PRODUCTIVITY. | |||
| BIGGER SHAFT AND BEARING SIZE ENABLING STURDY DESIGN.
|
| STANDARDS: | DESINED TO CONFONN: | DIN 24256 ISO 2858 API61O (IN GENERAL) |
||||||
| FLANGES | AS PER | DIN 2533,DIN 2543, ASA 125 LB FF, ASA15O RF BS 10 : 1962 TABLE E. |
||||||
| OPERATING RANGE | SPEED 1450 RPM DISCHARGE UP TO 1100 M3/HR HEAD UP TO 60 MTR SPEED 2900 RPM DISCHARGE UP TO 380 M3/HR HEAD UP TO 150 MTR |
|||||||
| WORKING PRESSURE | GREY CAST IRON STEEL 16 KG/CM' MAX. S.G. IRON CAST 20 KG/CM' MAX. STAINIESS STEEL, ALLOY 20 *DEPENDING UPON PUMP SIZE AND PUMPING TEMPERATURE. |
|||||||
| TEMPERATURE | GREY CAST IRON FROM- 30TO + 200 DC S.G. IRON AND CAST STEEL FROM- 40TO + 300 DC ALLOY CAST STEEL FROM- 120 TO + 350 *C |
|||||||
| MATERIAL OF CONSTRUCTION |
|
|||||||
| VOLUTE CASTINGHEAVY DUTY WITH INTEGRAL FOOT AND MULTI - RIBBED DISCHARGE FLANGE PROVIDED SUPERIOR RESISTANCE TO PIPE LOADS AND IMPROVES RELIABILITY BACK PULLOUT DESIGN ALLOWS FOR REMOVAL OF THE ROTATING ELEMENT WITHOUT DISTURBING THE CASING PIPE WORK OF MOTOR TO SIMPLIFY ROUTINE MAINTENANCE. | ||||||||||||||||||||||||
| IMPELLERDUPLEX STAINLESS CASTED, OPEN IMPELLER FOR HIGH EFFICIENCY PERFORMANCE, LOW RUNNING COST AND LONG LIFE, IMPELLER BACK VANES AND SHROUD DESIGN PROVIDES AXIAL BALANCE WHICH REDUCES MAINTENANCE AND DOWNTIME COST BY EXTENDING SEAL AND BEARING RELIABILITY. | ||||||||||||||||||||||||
| SHAFT SEALAMT - SERIES PROCESS PUMPS CAN BE SUPPLIED EITHER WITH GLAND PACKING COMPATIBLE TO THE PUMPED LIQUID OR WITH MECHANICAL SEAL IN THE STUFFING BOX HAVING SUITABLE CONNECTION / STAMPING FOR SEALING / SLUSHING / CIRCULATION / COOLING ETC. APPLICATIONS
|
| MODEL TYPE | SIZE (M.M.) | FLOW CAPACITY LPM | HEAD MAX METER | H.P. / RPM | IMPELLER DIA (IN M.M.) |
PRESSURE MAX PSI/KG | |
| SUCTION | DISCHARGE | ||||||
| AMTCP-10 | 25 | 25 | 126 | 10 | 1 / 2880 | 100 | 15 /1 |
| AMTCP-20 | 40 | 25 | 247 | 17 | 2 / 2880 | 120 | 25 /1.8 |
| AMTCP-30 | 40 | 40 | 366 | 21 | 3 / 2880 | 135 | 30 / 2.2 |
| AMTCP-50 | 50 | 40 | 550 | 33 | 5 / 2880 | 165 | 50 /3.3 |
| AMTCP-75 | 50 | 40 | 786 | 33 | 7.5 / 2880 | 170 | 50 / 3.3 |
| AMTCP-75A | 100 | 80 | 1408 | 25 | 7.5 / 2880 | 250 | 36 / 2.5 |
| AMTCP-50B | 100 | 80 | 897 | 25 | 5 / 1440 | 250 | 36 / 2.5 |
| Water Treatment Plant | |
| Effluent Treatment | |
| Filter Press for dyes and chemicals | |
| Fertilizer Plants Thermal and atomic power plants | |
| Drugs & Pharmaceutical industries. | |
| Rescaling of tubes. | |
| Scrubbing of corrosive gases like Cl2, Br, I So2, NH3, F2 Etc. | |
| Excellent for vacuum ejectors | |
| Transferring of concentrated HCl from road tankers | |
| Paper & Pulp industries | |
| Pickling Plants & Caustic Soda Plants |
water jetting pumpsworks by facilitating the cleaning in tubes and pipes. Certain high pressure water jetting pumps are also used in machines like heat exchanger, evaporator, condenser, calendria, boiler etc. These are low-maintenance pumps used in various industries at different pressure level to fulfill their different requirements. We are a leading waterjetting pump manufacturerthat design pumps as per your customized needs.
application ofwater jetting pump
| ||||||||||||||||||||||||||
special features
| ||||||||||||||||||||||||||
standard accessories
|
| MODEL NO | FLOW L/MIN. | MAX. BAR | PLUNGER DIA | MOTOR K.W./HP | MAX R.P.M. |
| AMTTPP - 35/20 | 20 | 35 | 22MM | 1.1/2 | 750 |
| AMTTPP - 35/35 | 35 | 35 | 30MM | 2.2/3 | 750 |
| AMTTPP - 35/50 | 50 | 35 | 34MM | 3.5/5 | 750 |
| Split Casting Direct Motor Coupled Centrifugal pump suitable for 1440 rpm. | |
| Pumps Available with Gland Packing arrangement. | |
| Easy to dismantle and reassemble for maintenance. | |
| Better Interechangeability of Parts |
APPLICATION
| ||||||
MATERIAL CONSTRUCTION
|
| MODEL NO. | SIZE IN MM | HP | HEAD IN METER | ||||||||
| 9.00 | 11.00 | 13.00 | 15.00 | 17.00 | 19.00 | 21.00 | 23.00 | 25.00 | |||
| L.P.S | |||||||||||
| AMTW 50A | 65 X 50 | 5.00 | 0.00 | 0.00 | 18.40 | 17.20 | 14.80 | 10.90 | 3.30 | 0.00 | |
| AMTW 50B | 65 X 50 | 3.00 | 11.50 | 11.20 | 10.90 | 10.20 | 8.80 | 5.00 | 0.00 | 0.00 | |
| AMTW 50C | 65 X 50 | 3.00 | 11.20 | 10.70 | 9.50 | 0.00 | |||||
| AMTW 65A | 65 X 65 | 5.00 | 18.50 | 18.50 | 18.30 | 17.90 | 17.20 | 15.90 | 13.00 | 0.00 | |
| AMTW 65B | 65 X 65 | 3.00 | 11.50 | 11.40 | 11.30 | 10.80 | 9.90 | 7.50 | |||
| AMTW 65C | 65 X 65 | 3.00 | 12.00 | 11.70 | 10.80 | 7.50 | |||||
| AMTW 80A | 80 X 65 | 7.50 | 0.00 | 24.50 | 24.40 | 23.80 | 22.50 | 21.00 | 16.90 | 8.30 | 0.00 |
| AMTW 80B | 80 X 65 | 5.00 | 0.00 | 0.00 | 24.80 | 23.00 | 20.40 | 14.00 | |||
| AMTW 80C | 80 X 65 | 3.00 | 0.00 | 0.00 | 24.80 | 23.00 | 20.40 | 14.00 | |||
| AMTW 80X | 80 X 80 | 7.50 | 24.50 | 24.50 | 24.40 | 24.00 | 23.50 | 22.90 | 18.00 | ||
| AMTW 80Y | 80 X 80 | 5.00 | 25.50 | 25.00 | 24.00 | 22.00 | 16.50 | ||||
| AMTW 80Z | 80 X 80 | 3.00 | 19.20 | 18.80 | 18.00 | 16.50 | 12.20 | ||||
| AMTW 100A | 100 X 80 | 10.00 | 0.00 | 38.80 | 36.50 | 34.10 | 31.10 | 30.00 | 21.60 | 13.30 | |
| AMTW 100B | 100 X 80 | 7.50 | 0.00 | 37.00 | 34.90 | 29.40 | 20.30 | ||||
| AMTW 100C | 100 X 80 | 5.00 | 29.50 | 27.10 | 21.80 | 14.60 | |||||
| AMTVPP SERIES PUMPS ARE DESIGNED AND MANUFACTURED BY AMBICA MACHINE TOOLS TO MEET CUSTOMER SPECIFIC REQUIREMENT WITH OPTIMUM STANDARDIZATION. IT'S A VERTICAL MOLDED POLYPROPYLENE CORROSION RESISTANT PUMPS. | ||||||||||||||||||||||||||||||
APPLICATION
|
| MODEL NO | SUCTION X DISCHARGE SIZE IN MM | IMPELLER OD IN MM | HEAD IN METERS / CAPACITY M3/H | HP / KW | RPM | |||||
| AMTVPP – 10 | 25 X 25 | 100 | 13/00 | 10/03 | 08/05 | 06/10 | 02/10 | ---- | 01/0.75 | 2880 |
| AMTVPP- 20 | 40 X 25 | 120 | 15/05 | 10/09 | 08/12 | 06/14 | 05/15 | 02/16 | 2.0/1.5 | 2880 |
| AMTVPP – 30 | 40 X 40 | 150 | 20/00 | 18/08 | 15/14 | 10/20 | 05/23 | 02/24 | 3.0/2.2 | 2880 |
| AMTVPP - 50 | 65 X 40 | 160 | 30/10 | 25/12 | 20/16 | 15/25 | 10/28 | 05/28 | 5.0/3.5 | 2880 |
Hydraulic test pumps are low-maintenance solution for high-pressure applications such as hydro testing, car washes, and jetting application. This pump is excellent for testing leakage and integrity from boilers, pressure vessels, Metal casting Parts, Gas Cylinder, Pipes & Tubes Parts.These hydraulic test pumpsare supply with different metals like brass, Forged stainless steel 304, stainless steel316, duplex steel, nickel bronze, aluminium bronze etc.
APPLICATION
| ||||||||||||||
SPECIAL FEATURES
| ||||||||||||||
STANDARD ACCESSORIES
| ||||||||||||||
PERFORMANCE RANG
|
