Our Products
type | garbage semi trailer |
definition | garbage semi-trailer is used to transport garbage collected by garbage trucks to the garbage semi-trailer through a station in the city for more economical transportation to the garbage disposal area. |
body volume | 40 m3 - 70 m3 |
body | st 37.2 is produced from quality hair.(base, side walls, ceiling) |
back cover | st is produced from hair in 37.2 quality.close the roof from the rear end.an acid-resistant seal placed between the body and the back cover provides full sealing.the rear cover hydraulically opens and closes upwards. |
compression-discharge percentage | a hydraulic cylinder is used for compacting. |
loading cover | the front of the body has a filling mouth that opens and closes with a hydraulic cylinder. |
chassis - wheelbase | chassis, axle, suspension, braking system, and electrical equipment are produced in accordance with the road regulations and tse norms. |
jack foots | parallel running wide, double speed, telescopic, jack feet are used. |
hydraulic equipment | the hydraulic system is operated with at least 57 hp diesel engine. |
type | combined channeling tools |
tank volume | 10.000 lt.- 20, 000 lt. |
waste water tank material | st-37, 304 & 316 cr-ni |
clean water tank material | 304 & 316 cr-ni |
sewage suction valve | 4 "- 6" |
sewage water dejarj vanayi | 4 "- 6" |
bom (top suction system) hose system | 4 "- 6" (optional) |
back cover | full hydraulic |
vacuum pump capacity | 1.500 m3/ h - 9.000 m3/ h |
vacuum pump injection | pto / intermediate transmission / auxiliary motor |
water pump | 100 bar - 250 bar |
pump debacle | 150 lt / min.- 425 lt / min. |
pressure regulator | pneumatic |
hose roller | hydraulic -80 mt.120 mt.(hose size) |
jetting roller | 20 mt.- 60 mt. |
logar valve lifting vinci | 250 & 400 kg.capacity |
Type | Duct Cleaning (Kuka) Tools |
Tank Volume | 1.000 lt.- 30, 000 lt. |
Tank Material | St-37, 304 & 316 Cr-Ni |
Water pump | St-37, 304 & 316 Cr-Ni |
Pump Debacle | 100 bar - 250 bar |
Pressure Regulator | Pneumatic / Mechanics |
Hose Roller | Hydraulic - 80 mt.120 mt.(Hose size) |
Jetting Roller | 20 mt.- 60 mt. |
Logar Cover Lifting Vinci | 250 & 400 kg.capacity |
The double-arm crane is designed to lift and load containers manufactured in accordance with the DIN norms and move them to the desired location and unload them.
HYDRAULIC FITTINGS:
Type | Channeling Tools |
Tank Volume | 3.000 lt.- 10.000 lt. |
Waste Water Tank Material | St-37, 304 & 316 Cr-Ni |
Clean Water Tank Material | 304 & 316 Cr-Ni |
Sewage Suction Valve | 4 "- 6" |
Sewage Water Dejarj Vanayi | 4 "- 6" |
Bom (Top Suction System) Hose System | 4 "- 6" (Optional) |
Back cover | Full Hydraulic |
Vacuum Pump Capacity | 500 m3/ h - 3, 000 m3/ h |
Vacuum Pump Injection | PTO / Intermediate Transmission / Auxiliary Motor |
Water pump | 100 bar - 250 bar |
Pump Debacle | 150 lt / min.- 425 lt / min. |
Pressure Regulator | Pneumatic |
Hose Roller | Hydraulic -80 mt.120 mt.(Hose size) |
Jetting Roller | 20 mt.- 60 mt. |
Logar valve lifting Vinci | 250 & 400 kg.capacity |
type | hydraulic compressed waste vehicles | |
body | 4 m3 - 8 m3 9 m3 - 24 m3 | |
boiler volume | 1: 3/1: 6 | |
hydraulic system drive | pto | |
accessories |
|
type | minimatik |
body volume | 3 m3 - 6 m3 |
unloading system | depending on request damper, curtain |
loading system | container loading system is available on request. |
product overview/application
portable incinerator as the name suggests is conceptualized to destroy the biological hazardous waste generated at hospitals and medical facilities. Incinerators are very useful to destroy the infectious waste material generated at health-care facilities. The unit is designed for quick and safe disposal of waste of hospital, nursing homes, industries, bio-medical wastes, experimental animals bodies waste generated in various research laboratories.
process explaination
incinerator works on the fundamentals of thermal destruction using controlled combustion chamber. Combustion is controlled and ensures adequate heat convection to destroy the waste into disposable state. Combustion chamber is adequately insulated and is provided with high grade kanthal a-1 super heating elements so as to ensure high temperature for safe disposal and has an in built ventilation exhaust system through a metallic duct provided on the top.