Aman Builditect By A.M. Group

Palda, Indore, Madhya Pradesh

UltraTech MICROKRETE HS2 is a polymer enriched, cement-based, high performance, high strength, non-shrink material for micro concreting and jacketing applications of areas where the concrete has deteriorated. It is suitable for micro-concreting with design strength up to 60 MPa. 

Areas of Application :  UltraTech MICROKRETE HS2 is ideal for micro concreting, structural strengthening and jacketing application of columns, beams, concrete slab and repair of damaged reinforced concrete element

Features & Benefits :

• High compressive strength
• Excellent bond strength
• Nil shrinkage
• Self-compacting
• Self-curing
• Nil wastage
• Economical
• Consistent in quality

Design Strength : 60 MPa

SKUs : 40 kg

Yield / 40 kg Bag : 22-23 litres @15% w/p ratio

UltraTech SUPER STUCCO is a self-curing, cement-based, polymer enriched, high performance surface finishing material consisting of high quality additives, graded sand and fillers for thin coat applications. It is ideal for direct application over smooth concrete surfaces requiring no prior hacking and no curing post application.

Areas of Application : 

UltraTech SUPER STUCCO is ideal for thin coat plastering in internal areas. Ideal for well-prepared concrete surfaces and block masonry done using thin block jointing mortar with maximum thickness of plaster in the range of 3-6 mm. Highly recommended over mivan finishes and smooth concrete areas. It is also recommended for filling the plumbing and electrical conduit linings.

Features & Benefits :

• Self-curing
• Ideal for thin coat applications
• Excellent adhesion properties with the substrate
• Reduced water absorption hence enhanced durability
• Provides uniform and smooth finish to walls
• Negligible wastage due to less rebound
• Speedy work due to convenience in application

SKUs : 25 kg

Coverage / 25 kg Bag : 60 sq.ft. @ 3 mm (As per lab conditions)

UltraTech READIPLAST RP is a cement-based, plastering mortar for application over masonry walls, RCC columns, beams and ceiling areas. It provides strong surface suitable for all types of final finishing applications.

Areas of Application :  UltraTech READIPLAST RP is ideal for plastering on inner and outer walls. It is recommended to be used effectively on brick, block, stone walls as well as concrete surfaces. Highly recommended for well-prepared walls requiring thickness of plaster up to 15mm in single layer.

Features & Benefits : 

• Excellent replacement to conventional plaster
• Well graded sand & additives ensures consistent quality
• Needs lesser curing than conventional plaster
• Provides uniform and smooth finish to walls
• Lesser rebound loss than conventional plaster
• Speedy work due to convenience in application
• Minimal wastage

SKUs : 40 kg

Coverage / 40 kg Bag : 18-22 sq.ft. @ 12mm (Depending on the substrate)

UltraTech WEATHER PRO WP+200 is a specially formulated integral waterproofing compound which improves the performance properties of concrete, plaster & mortar. It reduces the water permeability, improves the cohesion and also increases the compressive strength of concrete, plaster & mortar.

Areas of Application :

UltraTech WEATHER PRO WP+200 is recommended for increasing the workability and density of concrete, mortar & plaster. It can be used for all types of site-mixed normal concreting, for external and internal plastering and for brick masonry mortar.

Features & Benefits : 

• Better dampness prevention
• Better prevention from rusting
• Higher durability
• Enhances concrete strength
• Reduces water cement ratio
• Denser concrete
• Easy-to-mix

SKUs : 200 ml, 1 L, 5 L, 10 L, 20 L, 50 L, 100 L

Dosage : 200 ml / 50 kg bag of cement