Our Products
Industrial Valves
2 Products availableFaucet
2 Products availablePackaging Seals And Caps
1 Products availableFlanges
1 Products availableWe offer a complete product range of Vent Hood, Terrace Valve, wheel valve screwed, self fabricating taper and vent hood wall cap
| Design | : | Cast Iron Vent Hood BSP Screwed female end fitted with Bronze check nut & S.S-304 mesh or as demanded. |
| Range | : | 40mm & 50mm. |
| Marking | : | One side of the body "ALTO" & "Size" Other side of the body "VENT HOOD". |
| Utility | : | To exhaust the gas of diesel tanks, water tanks, other oil tanks and molasses tanks etc. |
| Temp. Range | : | 10 C to 200 C. |
| Testing | : | Hydraulically |
| DIMENSIONS : (in mm) | ||||||||
| Size (in mm) | A | B | ||||||
| 40 | 218 | 75 | ||||||
| 50 | 251 | 87 | ||||||
| MATERIALS : | ||
| Components | Material | Specification |
| Body | Cast Iron | IS : 210 Gr.FG-200 |
| Mesh | Stainless Steel | AISI-304 |
| Check Nut | Bronze | LTB-2 IS : 318-1981 |
| Design | : | Aluminium/Cast Iron Fill Cap BSP Screwed female end backed by rubber ring with locking arrangement. |
| Range | : | 80 mm. |
| Marking | : | Top of the cap "ALTO" & "Size". |
| Utility | : | To fill and measure the quantum of the diesel or petrol in the tank. |
| Temp. Range | : | 10 C to 200 C |
| Testing | : | Hydraulically |
| MATERIALS : | ||
| Components | Material | Specification |
| Body & Cover | Aluminium/C.I. | ---/IS : 210 Gr. FG-200 |
| Gasket | Neoprene Rubber | ------- |
| Strip & Rivets | Mild Steel | IS : 226 |
| Design | : | Cast Iron Anti-Waste Tap Screwed female end with M.S. Stem, Brass nut & rubber washer. |
| Range | : | 15mm to 20mm. |
| Marking | : | One side of the body "ALTO", "Size" & "Tested".Other side of the body "ALTO". |
| Utility | : | Quite suitable for Water and Oil applications. |
| Temp. Range | : | 10 C to 100 C. |
| Testing | : | Hydraulically |
| Test Pressure | Max C.W.P | ||||
| Body | Seat | Body/Seat | |||
| 300 PSI |
20 kg/cm² |
300 PSI |
20 kg/cm² |
200 PSI |
14 kg/cm² |
| MATERIALS : | ||
| Components | Material | Specification |
| Body & Push Knob | Cast Iron | IS : 210 Gr. FG-200 |
| Stem & Split Pin | Mild Steel | IS : 226 |
| Seat | Synthetic rubber | BS-2751 BA 80 |
| Nut | Brass | IS : 3488 |
| Design | : | Bronze Terrace Valve BSP Screwed female end with light spring & Aluminium disc. |
| Range | : | 40mm & 50 mm. |
| Marking | : | Top of the cap "ALTO" & "Size". |
| Utility | : | To exhaust the gas of petrol tanks. |
| Temp. Range | : | 10 C to 200 C. |
| Testing | : | Hydraulically |
| MATERIALS : | ||
| Components | Material | Specification |
| Body & Cap | Bronze | LTB-2 IS : 318-1981 |
| Disc. | Aluminium Alloy | -------- |
| Spring | Spring Steel | -------- |
| Design | : | Cast Iron Gate Valve BSP Screwed Female Ends with non rising stem Dimensions matched to IS:778-Class-II Available in: a) Bronze seat with Forged Brass stem. b) Bronze seat with S.S stem.c) C.I seat with M.S stem. | |
| Range | : | 15mm to 100mm. | |
| Operation Marking | : : | Hand Wheel Operated. One side of body "ALTO" & "Size" Other side of body "Tested 20kg/cm" | |
| Utility | : | 1) Bronze Seat with Brass Stem/Bronze Seat with S.S. Stem. Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (water, oil etc.) installations. 2 ) C.I. Seat With M.S. Stem. Oils and non-corrosive chemicals only. (Highly restricted for use on water lines) | |
| Temp. Range | : | 10 C to 200 C. | |
| Testing | : | Hydraulically | |
| Test Pressure | Max C.W.P | ||||
| Body | Seat | Body/Seat | |||
| 300 PSI |
20 kg/cm² |
300 PSI |
20 kg/cm² |
150 PSI |
10 kg/cm² |
| DIMENSIONS : (in mm) | |||
| Size (in mm) | A | B* | Ø |
| 15 | 60 | 97 | 8 |
| 20 | 60 | 116 | 9 |
| 25 | 70 | 127 | 10 |
| 32 | 80 | 137 | 10 |
| 40 | 90 | 158 | 12 |
| 50 | 100 | 175 | 12 |
| 65 | 105 | 220 | 14 |
| 80 | 125 | 235 | 16 |
| 100 | 160 | 285 | 20 |
| MATERIALS : | ||
| Components | Material | Specification |
| Body,Bonnet, Gland Nut & Hand Wheel | Cast Iron | IS : 210 Gr. FG-200 |
| Wedge (Seat) | Bronze/Cast Iron | LTB-2 IS:318-1981, IS : 210 Gr FG-200 |
| Stem | Brass/Mild Steel/ Stainless Steel |
IS : 3488, IS : 226, AISI-410 |
| Gland Packing | Asbestos Yarn | IS : 4687-1980 |
| Screw/Bolt, Nut & Washer | Mild Steel | IS : 226 |
| Design | : | Cast Iron Gate Valve Flanged Ends (Undrilled) with non rising stem Dimensions matched to IS:778-Class-II Available in : Bronze seat with forged Brass stem. (Valves with Drilled Flanges may be supplied on demand) |
| Range | : | 15mm to 100mm. |
| Operation Marking | : : | Hand Wheel Operated. One side of body "ALTO" & "Size" Other side of the body "Tested 20kg/cm2". |
| Utility | : | Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic(Water, Oil etc) installations. |
| Temp. Range Testing | : : | 10 C to 200 C Hydraulically |
| Test Pressure | Max C.W.P | ||||
| Body | Seat | Body/Seat | |||
| 300 PSI |
20 Kg/cm2 |
300 PSI |
20 Kg/cm2 |
150 PSI |
10 Kg/cm2 |
| DIMENSIONS : (in mm) | ||||||||
| Size (in mm) | A | B* | D | T | Ø | |||
| 15 | 72 | 97 | 95 | 6 | 8 | |||
| 20 | 76 | 116 | 105 | 6 | 9 | |||
| 25 | 90 | 127 | 115 | 8 | 10 | |||
| 32 | 100 | 137 | 140 | 8 | 10 | |||
| 40 | 110 | 158 | 150 | 9 | 12 | |||
| 50 | 120 | 175 | 165 | 11 | 12 | |||
| 65 | 140 | 220 | 185 | 13 | 14 | |||
| 80 | 150 | 235 | 200 | 13 | 16 | |||
| 100 | 190 | 285 | 220 | 16 | 20 | |||
| MATERIALS : | ||
| Components | Material | Specification |
| Body, Bonnet, Gland Nut & Hand Wheel | Cast Iron | IS : 210 Gr. FG-200 |
| Wedge (Seat) | Bronze | LTB-2 IS : 318-1981 |
| Stem | Brass | IS : 3488 |
| Gland Packing | Asbestos Yarn | IS : 4687-1980 |
| Screw/Bolt, Nut & Washer | Mild Steel | IS : 226 |
| Design | : | Cast Iron Wheel (Globe) Valve No.5 BSP Screwed Female Ends available in: a) Bronze renewable seat and Forged Brass stem. b) S.S renewable seat and stem. Cast Iron Wheel (Globe) Valve No.4BSP Screwed Female Ends available in: a) PTFE seat and Forged Brass stem.(from 20 mm to 32 mm)b) Forged Brass seat and stem.(15mm, 40mm & 50mm) | |
| Range | : | a) Wheel Valve No. 5 - 8mm to 100mm. b) Wheel Valve No. 4 - 15mm to 50mm. | |
| Operation Marking | : : | Hand wheel operated. One side of body "ALTO No.-4"/"ALTO No.-5".Other side of body "Tested", "Size" & "Arrow". | |
| Utility | : | Hot water, fuel oils, kerosene oils, gases, low pressure hot gases & hydraulic (water oil etc) installations. NOTE : Wheel Valve No-4 20mm & 32mm is specially recommended for use on Voltage Transformers. | |
| Temp. Range | : | 10 C to 200 C. | |
| Testing | : | Hydraulically | |
| Test Pressure | Max C.W.P | |||
| Body & Seat of W.V. No.-5 | Body & Seat of W.V. No.-4 | |||
| 500 PSI |
34 kg/cm² |
400 PSI |
28 kg/cm² |
|
Industrial Area, Jalandhar, Punjab 