Altechno Engineers Pvt. Ltd.

Jamia Nagar, Delhi

With vast experience and knowledge we are involved in offering a premium quality range of Stainless Steel Hopper & Cone Bottom Tanks. Our products are highly demanded in market due to their superior quality and accurate dimensions. These are widely used for the various applications in different industries. Moreover, it can be availed at market leading prices.

Features:

• Cost effective
• Fine quality
• Low cost

FRP Chemical Storage Tanks, Scrubbers & Process Equipment, Industrial Storage Tanks, Pickling Tanks, FRP Composite Pipes & Fittings, FRP Ducting

We are a dynamically developing company that has evolved itself as a prime manufacturer and supplier of superior range of pre treatment tanks for Galvanizing Plants, Pickling Plants, Pickling Tanks and Anti-Corrosive Equipment made for various Industrial Applications. We have been constantly innovating and improvising on quality of products to confer to the industry norms and standards.

Specifications:

• Material: Stainless steel of grade SS304 and SS316
• Size: Client Specific(Customised)

Flocculation tanks are used to mix polymer and sludge prior to sludge thickening or dewatering. Flocculation tanks are supplied with variable speed agitators, but the speed is very rarely changed during normal operation. Floc tanks generally have an open top, which allows operators to easily visually observe floc conditions. In applications where odors or harmful gases can be present, floc tanks are supplied with a cover. Altechnomanufacturesfloc tanks in numerous sizes to meet the individual needs of each application.

A re-boiler is a heat exchanger that is used to generate the vapour supplied to the bottom tray of a distillation column.

The liquid from the bottom of the column is partially vaporized in the exchanger, which is usually of the shell and tube type. The heating medium is most often condensing steam, but commercial heat transfer fluids and other process streams are also used.

We have designed, engineered, and manufactured the following types of reboilers

• Kettle re-boiler
• Vertical thermosyphon re-boiler/li>
• Horizontal thermosyphon re-boiler
• Fired re-boiler
• Forced flow re-boiler/li>
• Internal re-boiler

A knockout drum with a mist eliminator is common whenever a process requires entrained droplets to be separated from vapour stream.

A simple knockout drum (without a mist eliminator) will remove droplets larger than about 380 microns by gravity settling. Generally, gravity settling removes 90% of the liquid entering the vessel. However, the remaining droplets smaller than 380 microns can be significant problem for a downstream unit. A mist eliminator at the top of the knockout drum will remove the remaining droplets down to a diameter of 6 microns or less, depending on the type of mist eliminator.

A knockout drum with mist eliminator can achieve an overall efficiency of 99% liquid remova.

Blowdown tanks are designed to reduce temperature and pressure of the blowdown discharge from the boiler. This equipment is essential as it is undesirable to discharge the boiler blowdown directly to a sanitary sewer.

These large tanks retain the blowdown water volume from one blow after the flash steam has been vented to the atmosphere and allow the water to cool down by natural convection over 6-12 hour period. The cooled water will be below 140 Fahrenheit when it is displaced by the next blowdown and forced out of the overflow drainpipe. .

Being a client centric firm we are involved in offering a wide range of Mild Steel Hopper. We offer these to our customers in various sizes as per the clients needs. They are sturdy in construction and are developed using premium quality raw material which we procured from the trusted vendors of the industry. Moreover, we assure our clients to deliver these products in given period of time.

Features:

• Reasonable prices
• Quality approved
• Fine finish

To keep the client satisfied, we manufacture & supply high quality Steel Hoppers. The offered hopper is manufactured with the help of premium quality hard metal and sophisticated machines in adherence to set industry standards. Our offered hopper is widely used in heavy dusty industries for preventing side wise scattering of material. It is made available in different specifications of sizes and shapes for our clients to choose from.

Features:

• High strength
• Dimensional accuracy
• Easy to install

We offer technologically advanced Storage Silo/Storage Hoppers in various configurations and specifications that are extensively used in waste water treatment plants. These storage hoppers are manufactured using high grade raw material and with high performance it requires very low maintenance. The storage silo are leak proof, have excellent resistance against erosion, high temperature effects, acids and other chemicals. We also provide customization as specified by client.

Features:

• For all dry free-flowing materials
• Rigid & Robust construction
• Available in Mild Steel or Stainless Steel material
• Long Life

Shell and Tube Heat Exchanger is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. Shell Tubes Heat Exchanger are classified into fixed and Floating type Heat Exchangers . Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two fluids.

Shell and tube heat exchangers consist of a series of tubes. One set of these tubes contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can either provide the heat or absorb the heat required. In this type, the tube sheets are completely welded to the shell and acted as shell flanges. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell.

Applications:

Shell Tube Heat Exchanger is widely used in variety of application as a cooling solution. The most common amoungthem is for cooling of Hydraulic Fluid and oil in engines, transmissions and hydraulic power packs. With the right coimbination of materials they can also be used to cool or heat other mediums, such as swimming pool water or charge air. One of the big advantages of using a shell and tube heat exchanger is that they are often easy to service, particularly with models where a floating tube bundle (where the tube plates are not welded to the outer shell) is available. Can also be used on fixed tube sheet heat exchangers.

They are commonly used in

• Space heating
• Refrigeration
• Airconditioning
• Power Plants
• Chemical plants
• Petrochemical plants
• Natural gas processing
• Sewage treatment

Industrial heat exchangers consist of series of tubes. One set of these tubes contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can either provide the heat or absorb the heat required. A set of tubes is called the tube bundle and can be made up of several types of tubes: plain, longitudinally finned, etc. Shell and tube heat exchangers are typically used for high-pressure applications (with pressures greater than 30 bar and temperatures greater than 260 C).[3]This is because the shell and tube heat exchangers are robust due to their shape.

Several thermal design features must be considered when designing the tubes in the shell and tube heat exchangers: There can be many variations on the shell and tube design. The tubes may be straight or bent in the shape of a U, called U-tubes.

Specifications & Product Range :

• All Grades of Steel like Mild Steel, Stainless Steel & Aluminiumetc
• From 4" MM Dia to 2 MtrDia
• Length Ranging from 500 MM to 12 Mtrs
• Available in Single Pass & Multi Pass Variants

Application Areas:

• All Process Industries like, Gas, Cement, Paper, Thermal, Petro-Chemical, Chemical, Marine, Food & Beverages etc.,

These exchangers are known for:

• Dimensional accuracy
• High tensile strength
• Low maintenance
• Sturdy construction
• High performance
• Long performing life

In chemical engineering, chemical reactors are vessels designed to contain chemical reactions. One example is a pressure reactor. The design of a chemical reactor deals with multiple aspects of chemical engineering. Chemical engineers design reactors to maximize net present value for the given reaction. Designers ensure that the reaction proceeds with the highest efficiency towards the desired output product, producing the highest yield of product while requiring the least amount of money to purchase and operate. Normal operating expenses include energy input, energy removal, raw material costs, labor, etc. Energy changes can come in the form of heating or cooling, pumping to increase pressure, frictional pressure loss (such as pressure drop across a 90 elbow or an orifice plate), agitation, etc.

Reactors, unlike mixing tanks, are totally sealed. Mixing tanks are designed to disperse two or more chemicals together. Reactors, on other hand, allow the chemicals inside to go through a reaction phase which ultimately produces new and different chemical properties.

Specifications:

• 50 Ltrs, 100 Ltrs, 150 Ltrs, 200 Ltrs, 250 Ltrs , 300 Ltrs, 350 Ltrs, 400 Ltrs, 500 Ltrs, 600 Ltrs, 700 Ltrs, 750 Ltrs, 800
• Ltrs, 1 KL, 1.2 KL, 1.6 KL, 2 KL, 2.5 KL, 3 KL, 3.5 KL, 4 KL, 4.5 KL, 5 KL, 6 KL, 7 KL, 7.5 KL, 8 KL, 9 KL, 10 KL, 12 KL, 15 KL, 20 KL.

Available in GMP model and NGMP model, MS Jacket and SS 304 Cladding, SS 304 Jacket and SS 304 Cladding, Limpet Coil, Insulation.

Available with Anchor agitator, PBT agitator, Propeller agitator, Hydrofoil agitator.

Material of Construction: SS 316, SS 304 and MS.

PRS-IBR / NON IBR, Condensate Pump, Flash Vessels, Steam Headers, AutomaticBlowdown System.

Backed by a team of highly skilled and experienced professionals, we are engaged in offering a wide range of Sieve Tray Distillation Column. The offered products are precisely developed under the strict supervision of professionals by using best in class material coupled with contemporary technology. Offered products ensure reduced liquid presence on tray while offering improved process flexibility. These products are provides for easy and convenient installation support and comes with high gas flow capacity.

Features:

• Less maintenance
• Easy installation
• Smooth finish

We offer optimum quality Water Pre Heater For Boiler to our valuable customers. Processed as per the industry laid standards, these plants are commonly used to pre-heat water that has been delivered to a steam generating boilers. These water pre heating plants are known for their impeccable design and high water heating capacity.

Features:

Very long service life

No Corrosion

Efficient Workout

Specifications:

Peak Heat Output: 1233 W

Aperture Area: 1.68 m

We manufacture a wide assortment of indoor air filtration systems and industrial air filtration systems like air moisture separator, steam moisture separator, industrial moisture separator, etc., that are fabricated using high quality raw material and are used to for the filtration of air. Applicable in various industries, these moisture separators can be customized to suit the specific requirements of our clients.

We have carved a niche in the domain by offering a superior quality range ofRibbon Blender that includes horizontal ribbon blender, chemical blenders etc. Widely demanded in food processing, personal care and other similar sectors, this blender is used for mixing varied ingredients in proper manner. In addition, this Ribbon Blender is manufactured using premium grade components with the aid of sophisticated techniques under the stern surveillance of adept professionals.

Features:

• High performance
• Produces less noise and vibrations
• Power efficient
• Easy to operate

Industrial Silencers are used to reduce the noise generated when planned or unexpected steam, air, natural gas, nitrogen, oxygen or other process gases are vented (blown off) from high pressure to atmosphere. At such times, high noise levels, which are dangerous to plant personnel and likely to be environmentally unacceptable, are generated.

A silencer works by expanding the incoming flow through many small nozzles. This expansion creates a reduction and frequency shift in the vent noise. By correct selection of nozzle size, spacing and pattern, this reduction can be optimized to produce overall quieting. The pressure drop across the inlet diffuser is selected according to the duty of the silencer. We can examine the pressure losses through the pipe work and recommend the most suitable silencer pressure drop for the vent duty.

The fume extraction dust collector units are designed for high flow fume extraction. This powerful line is large and has a high airflow and filter capacity.

Typical applications includes welding fume extraction, light grinding dust, powder extraction, solvent fume extraction, and a variety of applications involving chemical fumes and dusts. The filters are made of HEPA filters, carbon filters, acid gas filters, and various other specialty blended filters.

Self supported steel chimneys to handle hot air, hot flue gases from various furnace and heat recovery units are designed to cater wind load, earthquake load, dead load, imposed load, shear force and maximum bending moment.

Steel chimneys are supplied to various industries as per the prevalent code of practice up to the height of 93 m (305 ft) and the maximum shaft diameter 2750 mm.

We are one of india's largest manufacturer's of steel pallets.We are known in the market as reliable manufacturer, supplier and trader of best quality Steel Plates. Owing to their fabrication by using finest quality material and technology, these products are highly durable and excellently finished. Our offered pallets are quality tested under strict norms for ensuring defect free delivery of products. Moreover, varied stipulations of these products are available with us in different specifications at affordable rates.

Technical Features:

• Formed Steel Pallets
• Light weight & heavy duty application!
• Warranted of 36 months ( 3 years)
• Dynamic & racking capacity: 1000 kg / 1500 kg / 2000 kg - as per client requirement
• Static capacity: 3000 / 4000 / 6000 kg

Sizes available:

• 1200 mm long x 1000 mm wide x 150 mm height
• 1200 mm long x 1200 mm wide x 150 mm height
• 1100 mm long x 1100 mm wide x 150 mm height

Half Drop Bins can be made with two options:

• Cage Type- Has Wire Mesh Walls
• Cage Type- Has Wire Mesh Walls

It has Drop open door on one side, which allow easy access to the stored items even in the stacked condition.

Rugged steel pallets for industrial applications offer longevity with 100% tested leaktight sumps for compliant spill control. Durable & corrosion resistant, in blue powder paint or galvanized steel finishes. 100% tested leak tight sump, fully compliant. Removable grating for easy cleaning. Safely stores hazardous and flammable liquids to protect the environments

Protect workers and the environment from hazardous leaks or spills with these hard working, heavy gauge steel pallets. Constructed of 11 gauge hot rolled steel and strengthened with formed edging, they provide excellent chemical resistance and durability. Generous sump capacities are fully compliant and 100% tested leaktight.

Sturdy, galvanized steel bar grating keeps drums out of overflow and removes for convenient sump inspection and cleaning. Sump is nestable for storage and transport to save space during shipping. Large forklift pockets (8.375"W x 3.875"H, 213mm x 98mm) in front and back makes relocation easy.

Available in three styles (2 drum, 4 drum in-line, 4 drum square) for versatile storage needs. In-line styles leave more space for clean isles when space is at a premium. User preference includes two finishes: environmentally friendly, tough powder coat paint in blue; or steel, hot-dipped galvanized after fabrication, for greater protection against rust and corrosion.

We manufacture FRP process equipment and scrubbers in a wide range of shapes, sizes and configurations. While the majority of these vessels are cylindrical, we can supply other shapes to meet the exacting demands of our customers.

Altechno Engineers fabricates a wide variety of fume scrubbers including packed bed scrubbers, carbon absorbers, spray contact chambers, bio-reactors and other devices used to control, reduce or eliminate undesirable exhaust streams. Scrubbers can be designed for pressure or vacuum and to ASME guidelines.

As a custom fabricator, we can manufacture equipment to any specifications quickly and economically.

With the continuous support and sincere efforts put by our experienced professionals we have been able to provideRegeneration Pressure Vessel. These regeneration pressure vessels are manufactured by our professionals using high quality of material & leading techniques as per the norm of industry. Offered regeneration pressure vessels are used in pipe plumbing systems to connect straight pipe or tubing sections. The offered regeneration pressure vessels are available in numerous specifications as per the need of customers.

Fiberglass pipe has great unsupported strength capability, corrosion resistant interior and exterior, is light weight and easy to fabricate / install, and has a very smooth interior for higher flow rates, reducing energy consumption.

The various product offerings are widely used for HVAC Piping, Power and Secondary Containment applications. Their long-term commitment to product innovation and compliance with recognized industry standards makes Altechno's Fiber Glass Systems the engineer's choice.

Altechno's FRP pipe is designed to be "user friendly". The resin, glass Reinforcement materials and composite construction were selected to Provide consistent corrosion resistance for the majority of chemical Applications for which FRP is considered appropriate.

Our pipe utilizes a heavy exterior coat of resin containing an ultraviolet stabilizer to impact long term resistance to the effect of sunlight and other weathering elements.

The range of our FRP Pipes and Ductings are availble in different dimensions and characteristics. Our products are very wide and able to meet many different application's requirements. They can be produced in any dimension from 25 mm(1") to 4000 mm (160"). The Standard Lengths are 3, 4 and 5 meters however customized Lengths are also available on Request.

We are a leading manufacturer of msss storage tanks from 1kl - 50kl capacities in different orientation like vertical, horizontal, square or rectangular shape. Our factory is fully equipped with latest machinery and all related equipments.

We are a dynamically developing company that has evolved itself as a prime manufacturer and supplier of superior range of pre treatment tanks for galvanizing plants, pickling plants, pickling tanks and anti-corrosive equipment made for various industrial applications. We have been constantly innovating and improvising on quality of products to confer to the industry norms and standards.

We are among the foremost manufacturer and supplier in the market engaged in providing a wide range of MS Chemical Tank. These tanks are manufactured by our experienced professionals using finest quality raw material. The chemical tanks manufactured by our organization are widely appreciated for the features like anti-leakage finish. Features:Highly durableSuper strongChemical and water resistant storage tanks Specifications:Size: Client Specific(Customised)

Clients can also avail from us our range of best quality reaction tank which we manufacture, supply and provide service. These reaction tanks are highly efficient in handling different chemicals which are used in different industries such as pharmaceutical, chemicals, food processing, etc. Our reaction tanks are made from high quality stainless steel raw materials fabricated with compliance with industrial standards. These reaction tanks are corrosion resistant, very durable and highly efficient for long lasting use. Features:excellent capacityrust proofhigh tensile strengthvery functional specifications:material: stainless steel of grade ss304 and ss316size: client specific(customised)

Mechanical Dust Collector, ID-Fan, FD-Fan, Feed Water Tank, Reboiler, Distillation column, Day Oil Tank, Water Preheater, Seperator, Air Preheater, Thermal Deaerator, Strainer, Steam Calorifiers.

Altechno Fiberglass division designs, engineers, and manufactures custom fiberglass chemical storage tanks, FRP (fiberglass-reinforced plastic) chemical holding tanks, and FRP process equipment for the chemical processing industry. As the leading chemical tank manufacturer, we combine technical expertise with on-the-job knowledge and experience. Being into custom fabrication, Altechno Engineers can manufacture fiberglass (FRP) chemical storage tanks to any specification quickly and economically.

we offer Flocculation Tank. Flocculation tanks are used to mix polymer and sludge prior to sludge thickening or dewatering. Flocculation tanks are supplied with variable speed agitators, but the speed is very rarely changed during normal operation. Floc tanks generally have an open top, which allows operators to easily visually observe floc conditions. In applications where odors or harmful gases can be present, floc tanks are supplied with a cover. Altechno manufactures floc tanks in numerous sizes to meet the individual needs of each application.

We offer customized steel tank. With vast experience and knowledge, we are involved in offering a premium quality range of stainless steel tank. These are available in various sizes & designs as per the requirements of our esteemed clients. Offered products are completely tested by our professionals on various parameters before they are dispatched. We also assure safe and timely delivery of our products. features:long lifefine qualityreliable