Alpha Mediequip ( OPC) Pvt. Ltd.

Dilshad Garden, Delhi

Instrument Sterilizer is available in three different sizes- large, medium and small to suit the varying needs of our clients. The perfectly fitted lid is equipped with a special mechanism to restrict excessive loss of steam as well as condensation inside the equipment.  These have been made using top grade raw materials sourced from some of the best vendors in the country. We would be delighted to undertake all your orders.

Details :

• Model No : AM-013

• Seamless shell & layer operated Lid fitted with full proof mechanism to control excessive steam escape and restricts condensate with in the shell.

• Incredible synchronised manoeuvrability of lid, due to statistically perforated tray for flushing and entry of water.

• Highly adoptable of your growing needs.

• Sizes : Large : 510*200*150mm,

• Medium : 430*200*150mm,

• Small : 300*150*125mm

Blood Roller Mixers are one of our top selling products today. They have the capacity to accommodate multiple test tubes, vials and bottles of varying sizes. They are highly efficient and can be left to run for hours unattended. They consume less amounts of power and ensure a thorough mixing action. If you are interested to order, kindly contact us in person or over the phone.

Details :

• Model No : AM-030

• These roller mixers can accommodate a range of different vials, small bottles, and test tubes of various sizes. The rollers are mounted on eccentric drive spindles to provide a rocking as well as rolling motion, ensuring a thorough mixing action. Parallel rollers can be specified, if preferred. Speed of the rollers is variable between 10 and 60 rpm. to cover a wide range of mixing requirements. And can run continuously for many hours unattended.

Applications :Ideal for applications such as the mixing of blood samples, viscous substances and liquid-solid suspensions where minimal aeration is required. Can also be used in aiding the de-frosting of samples.

Slide Warming Tables are used to warm the slides to the required temperature, usually that just below the melting point of wax. These have been fitted with thermostats that have been specially imported to ensure maximum efficiency and user friendliness.  The depression at the top surface can hold a thermometer to indicate the surface temperature. We are renowned for supplying high quality goods at nominal rates.

Details :

• Model No. : AM-010
• For heating slides to a uniform temperature just below the melting point of wax to provide maximum flattening without damaging the section. Top plate is mounted on an insulated metal frame. It is fitted with Imported thermostat to control surface temperature from ambient to 70^oC. A depression has been provided on the top surface to house a thermometer to indicate the surface temperature. Supplied complete with pilot light, cord and plug, but without thermometer.
• Suitable to work on 220 V, single phase, 50 Hz, AC supply.
• Top Plate Size -
  • Length : 600 mm
  • Width   : 150 mm
  • Available in Digital Model Also.

We are one of the most trusted suppliers and manufacturers of premium quality Fogging Machines. These have been manufactured from high quality materials and processed to perfection using our state of the art facilities under expert supervision.  This machine is non-reactive and works using the principle of dry vapour fumigation technology. We would be delighted to cater to all your orders irrespective of your location.

Details :

• Model No. : AM-007
• Our dry fog vapor fumigation technology is extremely useful in sterile areas of healthcare, pharmaceuticals, life sciences, research labs, food processing industries.
• Premium Grade Non Reactive
• SS Tank Set Engg.
• Plastic Tank Set
• Dry vapour fumigation machine :
  • Compatible with wide range of (H₂O₂ based) fogging solutions & environment disinfectants.
  • Enables fast & safe aerial fumigation process.
  • Generates ultra fine (sub micron sized) dry fog of non wetting aerosols disinfecting large spaces uniformly.
  • Delivers 90% more thrust & spread than any other fogging machine.
  • No wet surfaces, Non-wetting aerosol fog safe for equipments.
  • Validated for bio decontamination in healthcare, pharmaceuticals, laboratories, veterinary & food sectors.
  • Fumigation is delivered as a dry vapour allowing furniture to be also subjected to the decontamination process.
  • Cost effective, and competitively priced.

Model No.: AM-015

Made form stainless steel sheet. All dimension are as per IS-3992-1982.

 IIIIIIIVV

Length15020025*250300

Width7090100150130

Height3040504060

Available in both analog as well as digital models, our Water Bath Machine can be used to evaporate liquids or even melt certain solids effortlessly.  The double walled chamber is made with high grade stainless steel and the gap filled with glass wool insulation. The outer layer boasts of a good finish with enamel. These machines are available in various sizes with us. We are known for our timely supply of the goods.

Details :

• Model No. : AM-029

• Great for evaporating liquids like alcohol or for melting solids such as agar. Concentric rings can be removed to accommodate containers of various sizes.

• Double walled chamber made of Stainless Steel and outer wall made of thick mild steel sheet duly finished in enamel. The gap between outer and inner walls in filled with special grade glass wool insulation.

• The temp. is controlled by reputed make capillary thermostat from 5°C above room temp. to 90°C.

• Supplied complete with ON/OFF Switch, Cord & Plug but without thermometer. Suitable to operate on 220 V, 1 ph, 50 Hz, AC supply.

• Available in digital model also and various sizes.

Known as one of our most efficient products, our range of Dressing Drums is available at affordable rates. This product houses a custom designed chain that enables comfortable latching. It has been designed by our in house experts and promises perfection and high levels of consumer satisfaction. Made from high grade materials, our products are preferred over the others that are available in the market today.

Details :

• Model No. : AM-014

• Lid Snaps fit on the body.

• Belt fits snugly and uniformly on the body by precision clip which keep the belt in fair tension.

• Belt slots and perforations of the body correspond accurately.

• Custom designed chain for comfortable latching.

• Configuration, design & Material confirms IS 3831 in all sizes.

• Sizes : 
  • 350*240mm
  • 275*240mm
  • 275*132mm
  • 225*225mm
  • 350*130mm

Model No.: AM-016

Made form stainless steel sheet. All dimension are as per IS-3993-1982. Minimum finished thickness is 0.5 mm.

 IIIIIIIVVVI

Length200250300300350450

Width150200150250250300

Height505050505050

We are one of the leading and reputed suppliers of Microtome in the market today. It comes equipped with a counter balanced wheel as well as an improved locking device. This Microtome is easy to operate and adjust. We supply this product along with rexin, lubrication oil, two box holders and a knife of sufficient length. This product is known to be highly effective and efficient.

Details :

• Model No. : AM-024

• Well designed features for precise and accurate serial sectioning, with feed setting visible from front, improved locking device and counter balanced wheel. Light weight cover hinged at back provides for easy access to internal parts for cleaning and oiling. Feed is adjustable from 1 to 50 microns in steps of 1 micron. Free up and down movement of object clamp. Automatic restricted total excursion of 28 mm by disengaging the feed mechanism to prevent jamming.
• Ball and flange object clamp provides flexible orientation of object piece. Takes specimen upto 32×27 mm on stem of block holders. Knife holder allows for 120 mm on 180 mm long knife. Cutting angle is adjustable through 30 degrees. Two levers release knife holder for resetting angles and a third lever releases the entire assembly for movement on slide way to adjust horizontal distance from object.
• Latest cam system eliminates the conventional cord system for feeding, resulting in better section cutting and improved efficiency of the machine.
• Supplied complete with One knife 120 mm long with back and handle in wooden box, 2 block holders, One bottle of lubrication oil, rexin cover complete in all respects.

The Laminar Flow Cabinets are available with us in both horizontal and vertical models in different specifications. These provide comfortable working position that enables the operator to sit down. These cabinets are equipped to meet illumination, noise, filtration and vibration requirements. These are ideal for use in applications such as research work, sterility work, dry processing in semiconductor industries apart from many others.

Details :

• Model No.: AM-027

• These air flow cabinets are designed to meet the filtration, illumination, Noise & Vibration requirements providing air to meet class 100 (and class I) conditions, to the extent applicable

• Ideal for microbiological manipulations, work with bioassays sterility testing & research work, vial filling & bunging operation in parenteral units & for general dry- processing work in semiconductor industry etc. Provides a comfortable ‘sit down’ working position for the operators.

• Available on Horizontal and Vertical Model and in various sizes and Classes

Our Tissue Processors are in wide use in many leading research centres and labs. These can be used to automatically process human as well as animal tissues. These have been manufactured using our state of the art facilities with extreme care under strict supervision of our experts. These processors are available with us at affordable rates and promise a flawless performance with little maintenance.

Details :

• Model No. : AM-023
• This Tissue processor is used to process animal and human tissues automatically. It is accurate and easy to use and maintain. It is an excellent choice for histology and pathology labs of hospitals and research institutions.
• Used 12 stages of Tissue Processor.
• Extra Stage of Wax Bath with also available.

This user friendly Pressure Type Vertical Portable Sterilizer is one of our most sought after products in the market today. It is made from high grade stainless steel and processed in our state of the art facilities. This sterilizer can operate on either electricity or fuels like gas, kerosene or charcoal. It is available in two different sizes and is a power saving device making it a good investment.

Details :

• Model No. : AM-012
• Seamless Stainless Steel
• User's friendly.
• Thermally insulated and (synthetic Rubber) gasket.

• Handles holding lugs & knobs afford safe handling inspite of high temperature.

• Designed to operate electricity.but can operate on any fuel , like kerosene, charcoal or Gas.

• Sizes : 350mm (dia)*300-325(height)

This power saving Tissue Flotation Bath is probably one of our most used products in many research centres and labs. The temperature is efficiently controlled by a thermostat. This bath can be used for tissue culture, enzyme reactions and tissue section processing. These Tissue Floatation Baths have been manufactured to comply with international standards in terms of quality. These can be availed from us at affordable rates.

Details :

• Tissue Flotation Bath (Thermostatic Control)
  • Model No.: AM-009
  • Ideal for tissue culture, enzyme reactions fermentations tissue section processing etc. Ideally suited for preparing distortionless and wrinkle free tissue specimens. Its round, double walled, single piece Inner and outer chambers are made of aluminium, Inside black and outer surface finished in powder paint, Wide enough rim space for drying the wet slides. Temperature control is by High Quality Thermostat fore ambient to 70 Deg C with an accuracy of =/- 2 Deg. Supplied with Cord and plug.
  • Power Supply requirements: 220 V, single phase, 50 Hz AC supply.
  • Chamber Size :– Dia × Depth × Rim Width : 225 × 70 × 40

• Tissue Flotation Bath ( Digital Control)
  • Model No. 009A
  • Microprocessor Based
  • Designed , fabricated and tested for carrying distortion and wrinkle less tissue sample. Useful for diagnostic , histology and cyto pathology laboratories.
  • Outer wall is made of duly powder coated CRCA sheet . Inner chamber is rectangular and made of seamless stainless steel fine polished. Provided with high class insulation
  • Power Supply: 22V , 50 Hz , Single Phase, AC
  • Temperature Controller Micro processor based Temperature controller.
  • Temperature Range: Ambient to 75 Deg. C + / - 2 Deg. C
  • Chamber Size : ( L x W x H ) 240 x 150 x 50mm

One of our most sought after products is the Syringe Needle Destroyer that works on the principle of electro melting. This product has been manufactured in compliance with the industry standards. It is a safe way to dispose used needles and ensure that they are not reused.  This is available in 100 watt and 60 watt specifications. The cutting blade is made of high grade steel that promises a long and satisfying working life.

Details :

• Model No.: AM-019
• Available in 100 watt and 60 watt
  

 Features :

• Main Input supply V, Hz, A - SINGLE PHASE 230V+­10%, 60 +/­ 3% Hz, AC 4AMPS

• Body Material - ABS Plastic Injection Moulded

• Power consumption of continuous rating, W In use - 100 Watts for continuous Rating.

• Type of Electrodes used - Copper with silver plated.

• Destruction Rate in, seconds/Needle - 2 to 3 seconds per needle depending on the size of the needle.

• Thickness & Length of Needle Recommended: Dia. 0.4 mm to 1.2 mm, Length 12.5mm to 80mm.

• Burning Temperature, deg.C : 1800 Degree Centigrade (Approx.)

• Grade of steel & guaranteed life of cutting Blade (Approx No. of syringe and needle it can destroy) - Anti ­corrasation hardened stainless steel Blade made of 316 L grade. It can destroy 8500 Nos. of syringes approx.

• Tray Capacity No. of syringes & Needles - 200 Nos. of destroyed syringe hubs and needle SWRF can be collected in aluminum drawer.

• Safety Features, provided - Cartridge glass fuse of 2 Amps capacity is Provided.

• k. Dimensions of machines, mm - Dimensions (Approx.) W ­ 165mm, L ­ 110mm,

• H ­ 130mm Tolerance - +­5mm.

• Approx. Weight, kg - 1900 grams approx. without packing.

• Power Indicator - On / off Indicator provided.

• Power Cord - Of 3 M length with an earthing point provided.

• Principal of operation - Electro melting type.

Our Paraffin Dispensers find wide use in many labs including forensic and anatomy labs. These dispensers can be used to melt paraffin under high temperatures to form embedded modules or blocks. The inner temperature is controlled by a thermostat while the outer body is made from high quality materials to make it safe for use. If you would like to place an order, kindly contact our sales executives.

Details :

• Model No. : AM – 026
• Paraffin Dispenser is used in Histopathology lab. Forensic medicine lab., and anatomy lab. Where wax embedded module or blocks are prepared. Specially designed where large volume of paraffin is required, to facilitate for collecting wax for embedding purpose. A tap with temperature control is provided so that wax is not stuck to tap. It flows free when melted. Temperature is controlled by trusted thermostat and is kept 65°C. Inner and outer wall are made of SS and in between Heat insulation is provided. Outer body remains cool, easy to operate. Keep it on table & plug it to 230 Volts. 1 phase, AC supply and wax will be melted within approx. one hour.
• Available in thermostatic and Digital Model.

The Tissue Embedding Rings are primarily used to hold and identify tissue blocks.  These rings are available with us in different sizes and can be customized according to the needs and requirements of each client.  Usually, the surface of the ring is marked with an identification number to avoid confusions. We avail these Tissue Embedding Rings at highly competitive rates. Each package that we supply contains 100 rings.  Contact us for further details.

Details :

• Model No. : AM-001
• Embedding rings are suitable for holding and identifying tissue sample blocks and fit well in microtome chuck adapters. The etched writing surface on the ring is marked with an identification number and placed on top of the sample block. Additional paraffin is poured into the base mold to cement the ring onto the tissue block. The embedding ring securely holds the tissue sample in the microtome chuck adapter for sectioning and then identifies the sample while in storage. Rings are available in different colors. Each dispatch pack contains 100 no. of Tissue Embedding Rings.

 Features :

• Made Of First Class ABS material

• Size : ( L x W x H ) 1.6 x 1.1 x 0.45 inch

• Weight : Light Weight 2.8gms

• Unique dotting to give a better grip

• Made Of First Class ABS material

• Having high melting point to avoid

• Mixing with wax when in use

• Readily available in Milky white colour

• Also available in Pink , Green and Blue Colour ( On Demand )

• Dispatch Pack : 200 No. rings each Pack

We have a reputation for supplying top notch quality Tissue Embedding Cassettes  that guarantee perfection and efficiency. These cassettes have been designed using materials that make them resistant against the action of most solvents. The slots in the design ensure proper drainage and exchange of liquids. Each pack that we dispatch contains 200 cassettes. Milky white colour is available immediately while other colours like pink, blue and green will be supplied on demand.

Details :

• Model No. : AM-002
• Disposable plastic cassettes hold tissue specimens during processing and embedding, as well as in storage. Molded from a special high-density ABS, these patented cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximize fluid exchange and ensure proper drainage. The one-piece integral lid eliminates the need for separate steel lids. They can be opened and closed as often as necessary and will always relock securely without danger of specimenloss. The anterior writing area is slanted at a 45° angle to make the cassette more suitable to be used with certain types of cassette labeling instruments.

Features :

• Made Of First Class ABS material

• Size : ( L x W x H ) 1.6 x 1.0 x 0.32 inch ( Regular)

• Weight : Light Weight

• Made Of First Class ABS material

• Having high melting point to avoid

• Mixing with wax and when in use

• Readily available in Milky white colour

• Also available in Pink , Green and Blue Colours ( On Demand )

• Dispatch Pack : 200 No. cassettes each pack

Our Biological Safety Cabinets are used in high quality applications where clean air is required for storage. These are available in different sizes and shapes to suit all the varying needs of all our clients. These house pre filters, gas cocks, static pressure manometers and front doors fitted with glove ports. We are experienced in manufacturing and supplying top quality Biological Safety Cabinets.

Details :

• Model No. : AM-028 

• These bio safety cabinets find extensive application in scientific, medical and industrial fields where localised high quality clean air working environment is required in the work zone and at the same time protection of personnel and the environment/atmosphere is required. Its exhaust system ensure 100% exhaust of air from the work area via suitable plenum under the S.S. perforated table, and it works in co-ordination with the main air flow system. The built in HEPA filter and virus burn out system at exhaust ensures environment protection.

• The unit is supplied complete with HEPA filter for work area & for exhaust, pre filters, U.V. Light at work area & exhaust, front door fitted with glove ports, static pressure manometer, gas cock.

• Available in different class and sizes.

Biological Microscopes find many uses in educational institutions, forensic labs and many other research centres. They can be used to intricately study the structure of a tiny cell. These have been made using superior quality materials that have been sourced from some of the best vendors available today. We offer these microscopes at affordable and highly competitive rates. Contact us for further details.

Features :

• Very useful for tissue analysis, examining forensic evidences, determining the health of an ecosystem, studying the role of a protein within a cell, studying atomic structures etc.
• Available in different types and models.

The durable and reliable Microscope Slide Boxes are one of our most loved products. They are purchased in huge quantities by our clients regularly. These boxes are highly resistant to humidity as well as insects. All our slide boxes have been verified for quality by our in house experts. We have a reputation for supplying the goods on time without any loss in quality.

Details :

• Model No.: AM-006

• These slide boxes are durable, compact & provide utmost protection to 1” x 3” slides. Heavy walls will not wrap, splinter or crack. Boxes are unaffected by humidity and are throughly insect proof

Features :

• Material : polypropylene
•  Slide Capacity : 25 Slides// 50 Slides// 100 Slides

Located in Delhi, we are one of the top manufacturers and suppliers of Lab Vortex Mixer.  This consists of a vibrator that can agitate liquids in test tubes for quicker reactions.  This is also used to remove sediments from the tips of centrifuge tubes.  It is available in different sizes to suit the varied needs and requirements of our clients. These mixers can be availed from us at affordable rates. 

Details :

• Model No. : AM-022
• Useful for rapidly mixing/agitating solution in test tubes. The vibrating neoprene rubber cup accommodates a variety of sizes of test tube/flasks.
• Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. Particularly efficient for dislodging sediments from tips of centrifuge tubes. The housing is 150 × 150mm approx. The Vacuum Rubber pads are provided at bottom. Machine supplied with complete with speed control, cord and ON/OFF switch and indicator to work on 220V, 1Ph, 50 Hz. AC supply.

Microscope Slide Cabinets are available with us in different sizes and the customers can pick according to their needs and requirements. These are famous for their powder coated finish and are equipped with a door along with a lock and key. The trays have been manufactured using anodized aluminium and fitted in such a way that removing or inserting one does not disturb another.

Details :

• Model No. : AM-025
• Projector Slides can be stored suitably in this cabinet Made of M.S. Sheets well designed for its appearance and durability. Powder coated finish. Smoothly working door, fitted with handle, lock and key. Slide trays made of Anodized Aluminium have been arranged separately to avoid any disturbance to other trays, while taking out or putting in. The trays are fitted with uniformly slotted aluminium plates each holding. 50/100 slides and index card holder.
• Available in various sizes.