Write a Review
Our Products
Level Switches
2 Products availableProcess Control Systems & Equipment
2 Products availableProcess Controllers
1 Products availableData Loggers
1 Products availableThermocouple
1 Products availableMeasuring Instruments & Equipment
1 Products availableOur product range contains a wide range of Mineral Insulated and Flame Proof Indicator
The US1000 Digital Indicating Controller has bright LED bar displays, and a variety of advanced control and custom computation functions. Operations and configurations can be easily carried out using the front panel keys or PC.
Features :
Vibrating Fork Level Measurement Switch Point level switches which are based on the vibrating tuning fork principle that are designed to detect the low and high level of liquids and fine-frained flowing solids.
If you are working with (but not limited to) viscous liquids and slurries, use Sapcon's relaible and accurate level measurement solutions based on the RF-Admittance level measruement principle.
Accurate temperature monitoring and control begins with a properly designed sensor. RTD - Resistance Temperature Detector used for temperature measurement (-) 200 deg C to 500 deg C (up to 800 deg C on request), must have the physical configuration neccesary for optimum thermal response to the process fluid it is sensing and the resistive element compatiable with instrumentation.
The design of Universal Process Controller is characterized by high reliability and precision, electrical noise and EMI immunity. These features make them ideal for industrial applications in Instrumentation and Process Control.
They accept fixed or universal input that can be mA DC, Volts DC, mV DC, thermocouples, RTD or pulse input. The controllers are projected on modularity and flexibility concepts, having single or dual relay output.
It can be used for ON/OFF control application where the control action is reverse for heating and direct for cooling. The controller is calibrated for all the basic input and the calibration is not required to be changed if the input type is changed. However if re calibration is required due to any error then calibration can be done through keyboard.
Microprocessor based fault tolerant design. High brightness 4 digit LED display .Wide range, -100 to +400 Deg.C Resolution of 0.1 Deg C over full range . Built in sensor Non Linearity correction to DIN 43760. Single / Two point software Calibration data ratention . Flameproof gas Gr.ll A, B enclosure . Digital Communication Interface on RS485 MOBUS.
Our Mineral Insulated Thermocouple Assemblies consist of two, four or six thermocouple wires embedded in compact Mgo - mineral insulation, enclosed in a metallic tube The assembly is compact , flexible enough to route, has a high insuation resistance and high thermal conductivity. Mineral insulated thermocouple assemblies are robust in construction and offer good mechanical strength.
Advantages: Faster response Longer length can be offered Pliable and easily routed available in SS316, SS310, Inconel -600, Incoloy -800, SS446 sheath materials
Thermowell are provided to protect the basic sensor from the Thermowell material can be brass, SS304, SS316, mechincal damage and corrosion. An extremely sturdy SS316L, SS310, Inconel 600, Inconel 800, Monel, design may increase the life of the sensor but may lead to a Hastelloy depending upon the process parameters and type poor response. Similarly, a delicate design will have poor life of fluid. For proper selection of Thermowell material, expert but will improve the response time.
Various Types of Thermowells :
The UT35A is a general-purpose digital indicating controller with selectable multi-channel contact I/O and a wide range of communication options. It also comes standard with a ladder sequence function.
The UT32A is a compact general-purpose digital indicating controller that supports Modbus and CC-Link communications. It also includes a ladder sequence function.
Features :
Generally Pressure Gauges and Differential Pressure Gauges are provided with Micrometer type Pointer, by which zero can be adjusted after opening the bezel & glass. However for gauges with Liquid filled Case, this arrangement is practically not suitable, since the filling liquid has to be drained before opening the bezel & glass. After doing the zero adjustment, the Bezel & Glass has to be re-assembled and again the case has to be filled with Liquid. In order to overcome this difficulty, general instruments Consortium has developed a unqiue design if external zero adjustment. By this arrangement, zero can be adjusted without draining the Glycerine, without opening the Bezel, without removing the glass & without touching the pointer, just by rotating a knob provided outside the gauge.
Features:
Pressure and Differential Pressure Gauges, manufactured in accordance with international standard EN 837, CE Certified.
Features :
Alpha Engineering & Systems (Alpha Engineering & Systems)
A-2,IInd Floor, Ring Road, Rajouri Garden, Delhi
Share us via
