Alpha Chem

Saha, Ambala, Haryana

These Petri Dishes moulded in Polypropylene are clear & unbreakable. The moulding material being Polypropylene, these can be repeatedly autoclaved. The ridges on the inner side of the cap prevent the base from sticking to the cap.

Cap. : 50mm, 75mm, 100mm, 125mm, 150mm

This burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydroflouric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used upto 5% wt/wt of acids or 30% bases.

Cap. 25ml, 50ml

Watch Glasses Polished, ground edges, made from selected glass sheet.Water Voltameter Glass cup form with two platinum electrodes sealed in stem with connecting wires connected to two terminals fitted on the wooden base 100mm round. With two graduated 15x2cm test tubes and a holder to support them.

plain desiccators are physically the same as vacuum desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.

sizes : 150mm, 200mm, 250mm

These non-corrosive, moulded Retort stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropyelene covering making it non corrosive. The rod measuring 12.5mm x 750mm can be screwed in to the heavy base giving way to a perfectly stable retort stand.

Sizes :

225x150mm Side Hole

300x200mm Center Hole

300x200mm Side Hole

ALPHA CHEM-509 Test Tube Holder peg type

Peg-type holder with spring for closing jaws. 180mm length, accepts tubes 11-19mm diameter.

ALPHA CHEM-536 Gas Generator Kipps

Gas Generator Kipps Made of soda glass, complete with delivery tube, thistle funnel and rubber cork.

Used to produce common gases

Simple to operate and quickly charged as well as assembled

ALPHA CHEM-537 Gas Jar

Glass with ground flange, without lid and heavy foot.

ALPHA CHEM- 948 Digital BOD Incubator

Double walled outer construction of mild steel epoxy coated paint, inner chamber of highly polished stainless steel sheet BOD incubator inner chamber has door operated illumination, 2 compartments with stainless steel removable and adjustable shelves, forced air circulation is equipped with best quality motor blower with air ducting system for positive air flow for constant room temperature in the chamber. Puff insulation is given between the inner and outer walls to prevent thermal loss. Equipment is fitted with hermetically sealed compressor with relay guard, BOD incubator heat exchanger filled with eco-friendly cfc free refrigerant.

It is provided with 2 doors with inner full length transparent door BOD incubator. Main door is double walled puff insulated inner stainless steel and fitted with heavy sturdy hinge and magnetic gasket, lock & key. Automatic temperature control by digital temperature controller cum indicator with pt.100 sensor. The equipment has wheels for easy mobility.

Temperature range is 5c to 50c +/- 0.5c.

Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, temp. controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.

ALPHA CHEM-1317 Chiller Water Bath

Most ideal for chilling and condensing applications in external systems such as Rotary Vacuum Evaporators, Viscometers, Electrophoresis Systems, Chilling of heated water baths and general lab applications of chilling in closed loop systems.

ADVANTAGES & BENEFITS

Compact circulator chiller, can be placed under or over the workbench.

Hermetically sealed compressor with environment friendly CFC FREE refrigerants.

Reduces tap water consumption thus reducing high cost of water and waste water.

Waste water does not contain hazardous substances thus eliminating danger to personnel and environment caused by solvents.

Built-in circulator pump for efficient circulating processes.

Offers highest level of performance, flexibility and control for most demanding applications.

Low noise level.

Wide operating ranges and applications.

CONSTRUCTIONAL FEATURES

Inner bath chamber & lid made of stainless steel (SS-304 grade).

Outer body made of CRC sheet duly powder coated.

Space between inner and outer chamber filled with high grade PUF insulation.

Mounted on castors for easy portability.

CONSTRUCTIONAL FEATURES

Various temperature ranges available to choose from depending upon varied requirements and applications.

Microprocessor based PID DIGITAL TEMPERATURE INDICATOR CUM CONTROLLER.

With timer, alarm & over temperature protection

Powerful circulation pump with 15 Lpm capacity at zero head for water.

Use ethanol for temperature ranged below +5C.

To work on 220/230 volts, 50/60 Hz AC Supply.

Micro Centrifuge High Speed Brushless, 20000 r.p.m. Alpha Chem is manufactures, exporter & suppliersMicro Centrifuge High Speed Brushless, 20000 r.p.m.

High speed Micro Centrifuge, Max 20000 r.p.mHeavy duty C.R.C. constructionPowder coated finishFitted with brushless automatic balanced motorDigital Timer of range 0-99 minutesDigital Speed IndicatorDigital R.C.F. IndicatorProgrammable Speed regulatorElectronic Safety lid lockImbalance detector Prices are without Rotor.

ALPHA CHEM-519 Boss Heads

Boss Heads For use with retort stands, with T-Screw to hold 12mm dia. rod.

Test Sieves : TEST SIEVES BRASS FRAME WIRH S.S. MESH, 4" DIA. X 2" HT.

ALPHA CHEM-522 Retort Stand Base Rectangular

The Retort Stand Base has a sturdy cast-iron base, finished in blue/black.

The Retort Stand Base is available in 3 sizes: 160mm x 100mm, 200mm x 125mm, 250mm x 160mm.

The Retort Stand Base has a a tapped hole to accept a rod with 10 x 1.5mm metric thread.

ALPHA CHEM-507 Test Tube Holder

Test Tube Holder Metal, with sliding collar and wooden handle, accepts tubes 22-32mm

Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient becuaseof its tapered spout.

Cap. 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml

ALPHA CHEM-505 Test Tube Stand Test Tube Stand An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colors and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water.These space saving racks can easily be disassembled for cleaning purpose.

ALPHA CHEM-506 Test Tube Stand 3 Tier These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient & removal of tubes. The pc rack has transparent upper & middle plates where as in pp racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freezing temperatures.

Specifications :

Particulars

13 mm x 31 tubes

16 mm x 31 tubes

20 mm x 20 tubes

25 mm x 12 tubes

25 mm x 18 tubes

32 mm x 12 tubes

25 mm x 18 tubes

13 mm x 18 tubes

15 mm x 18 tubes

18 mm x 12 tubes

13 mm x 62 tubes

16 mm x 62 tubes

20 mm x 40 tubes

13 mm x 48 tubes

13 mm x 72 tubes

ALPHA CHEM-543 Watch Glasses

Watch Glasses Polished, ground edges, made from selected glass sheet.

ALPHA CHEM- 952 Carbon Dioxide Incubator

Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet. A full view inner glass door is provided along with outer double walled door provided with magnetic gasket. Inlet nozzle for Carbon Dioxide or Air mixture is also provided. Temperature range 5C above ambient to 60C 2C. Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc. Workable on 220V AC 50Hz single phase.

we are manufacturing and exporting a wide range of Microtomes that includes Rotary Microtome Erma Type, Senior Precision Rotary Microtome and Freezing Microtome. These instruments are specially engineered for use in various medical and biological research works. We are offering these instruments to clients in different specifications to meet their diverse requirements. Features: These instruments are appreciated for their precise feed mechanismProvided with safety deviceDesigned with a heavy cast iron protective dust cover