Our Products
Metal Pipes & Tubes
1 Products availableSteel Bars
1 Products availableHeavy Duty Nuts
1 Products availableAlloy Pipes
1 Products availableWe are leaders in the market for providing best range of Monel Steel 400, Monel Steel 500, Hastelloy Steel C22 and Inconel Steel
Our clients can acquire from us, high quality range of Copper Nickel Pipes. Our Pipes are manufactured from high-grade technology and advanced equipment and machinery. Our Pipes are well reckoned in the market for their premium quality and durability.
Specifications
Size | 15 mm NB up to 1200 mm NB |
---|---|
Schedule | 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160, and XXS |
Finish | Hot dip galvanized, Epoxy Coated, Electro polished, Matt/Mirror Polish, Teflon Coated, and Oxidized |
We are amongst the well reckoned Manufacturers, Exporters, Importers, and Suppliers of Bars. Our Bars are well reckoned in the international market for their premium quality and durability. The Bars that we provide are used in a wide variety of industries. Owing to their high strength and low maintenance, the demand for our Bars has increased tremendously. Our bars come in a range, which includes Carbon Steel Bars, Stainless Steel Bars, Alloy Steel Bars, Nickel Alloy Bars and Copper Nickel Bars.
Owing to the high performance and excellent corrosion resistance, our Monel Steel 400 is in hige demand in the market. We offer Monel Steel 400 in various forms of bar, sheet, forgings, coil, platye, etc., as per the demand of the clients. our Monel Steel 400 is used in chemical, oil and marine industries.
Chemistry Chemical RequirementsNiCMnSSiCuFeMax0.32.000.0240.534.02.50Min63.028.0 Tensile Data Mechanical Property RequirementsUltimate TensileYield Strength (0.2% OS)Elong. in 2 in. or 50mm (or 4D), min., %RAHardnessCold WorkedSRMin87 KSi60 KSi20BMaxMin600 MPa415 MPaMaxHot WorkedSRMin80 KSi40 KSi30DMaxMin552 MPa276 MPaMax Specifications FormStandardMetal TypeUNS N04400BarASTM B164 QQ-N-281 Din 17750WireSheetASTM B127 QQ-N-281PlateASTM B127 QQ-N-281PipeASTM B165TubeASTM B165FittingForgingASTM B564Weld WireFM 60 ERNiCu-7 17753Weld ElectrodeFM 190 ENiCu-7Din2.4360 Ratings Machining DataCarbide tools are suggested for rates better than 50% of Type 304.Machining TypeSuggested starting rates are:Single Point turning :Roughing - 0.15" depth, 0.015"rev feed -175 SFMFinishing - 0.025" depth, 0.007"rev feed - 200 SFMDrilling :14" Dia hole - 0.004"rev feed - 60 SFM12" Dia hole - 0.007"rev feed - 60 SFM34" Dia hole - 0.010"rev feed - 60 SFMReaming :Feed - same as drilling - 100 SFMSide and Slot Milling :Roughing - 0.25" depth - 0.007"tooth feed - 125SFMFinishing - 0.050" depth - 0.009"tooth feed - 140SFMThese rates are for carbide toolsType C-2 for roughing, drilling and reamingType C-3 for finishing
Characteristics
Applications
Note
We are the best destination to procure supreme quality Monel Steel 500. Our Monel Steel 500 is acknowledged for its high strength corrosion fatigue and erosion resistance. We make available Monel Steel 500 in different forms such as forgings, fasteners, wires and bars to cater to the wide demands of the clients.
Chemistry Chemical RequirementsNiMnSiFeAlSCMax1.500.502.003.150.0100.18Min63.002.30 Tensile Data Mechanical Property RequirementsUltimate TensileYield Strength (0.2% OS)Elong.Hardness Rockwell C, min.Hardness Brinell 3000 kg, min.Cold WorkedSR Over 1(25.4) to 3Min140 KSi100 KSi17.029280MaxMin965 MPa690 MPaMaxHot Worked Aged HardenedMin140 KSi100 KSi20.027265MaxMin965 MPa690 MPaMax
Characteristics
Applications
Specifications
Form | Standard |
---|---|
Metal Type | UNS N05500 |
Bar | ASTM B865 QQ-N-286 |
Wire | AMS4676 |
Sheet | ASTM B865 QQ-N-286 |
Plate | ASTM B865 QQ-N-286 |
Fitting | |
Forging | QQ-N-286 Din 17754 |
Weld Wire | FM 60 ERNiCu-7 |
Weld Electrode | FM 190 ENiCu-7 Din 17753 |
Din | 2.4375 |
Recommended Tool Types and Machining Conditions
Operations | Carbide Tools |
Roughing, with severe interruption | Roughing, with severe interruption |
Normal roughing | Turning or Facing C-2 or C-3 grade: Negative rate square insert, 45 degree SCEA, 1/32 in nose radius. Tool holder: 5 degree neg. back rake, 5 degree neg. side rake. Speed: 90 sfm depending on rigidity of set up, 0.010 in. feed, 0.150 in. depth of cut. Dry, oil, or water-base coolant. |
Finishing | Turning or Facing C-2 or C-3 grade: Positive rake square insert, if possible, 45 degree SCEA, 1/32 in. nose radius. Tool holder: 5 degree pos. back rake, 5 degree pos. side rake. Speed: 95-110 sfm, 0.005-0.007 in. feed, 0.040 in. depth of cut. Dry or water-base coolant. |
Rough Boring | C-2 or C-3 grade: If insert type boring bar, use standard positive rake tools with largest possible SCEA and 1/16 in. nose radius. If brazed tool bar, grind 0 degree back rake, 10 degree pos. side rake, 1/32 in. nose radius and largest possible SCEA. Speed: 70 sfm depending on the rigidity of setup, 0.005-0.008 in. feed, 1/8 in. depth of cut. Dry, oil or water-base coolant. |
Finish Boring | C-2 or C-3 grade: Use standard positive rake tools on insert type bars. Grind brazed tools as for finish turning and facing except back rake may be best at 0 degrees. Speed: 95-110 sfm, 0.002-0.004 in feed. Water-base coolant. |
Facing Milling | Carbide not generally successful, C- grade may work. Use positive axial and radial rake, 45 degree corner angle, 10 degree relief angle. Speed: 50-60 sfm. Feed: 0.005-0.008 in. Oil or waterbase coolants will reduce thermal shock damage of carbide cutter teeth. |
End Milling | Not recommended, but C-2 grades may be successful on good setups. Use positive rake. Speed: 50-60 sfm. Feed: Same as high speed steel. Oil or water-base coolants will reduce thermal shock damage. |
Drilling | C-2 grade not recommended, but tipped drills may be successful on rigid setup if no great depth. The web must thinned to reduce thrust. Use 135 degree included angle on point. Gun drill can be used. Speed: 50 sfm. Oil or water-base coolant. Coolant-feed carbide tipped drills may be economical in some setups. |
Reaming | C-2 or C-3 grade: Tipped reamers recommended, solid carbide reamers require vary good setup. Tool geometry same as high speed steel. Speed: 50 sfm. Feed: Same as high speed steel. |
Tapping | Not recommended, machine threads, or roll-form them. |
Electrical Discharge Machining | The alloys can be easily cut using any conventional electrical discharge machining system (EDM) or wire (EDM). |
Plasma Arc Cutting | Our alloys can be cut using any conventional plasma arc cutting system. The best arc quality is achieved using a mixture of argon and hydrogen gases. Nitrogen gas can be substituted for hydrogen gases, but the cut quality will deteriorate slightly. Shop air or any oxygen bearing gases should be avoided when plasma cutting these alloys. |
We offer Hastelloy Steel C22 which comprises of all the desired attributes like strength, durability and resistance to all types of corrosion. Hastelloy Steel C22 is available in various forms such as bar, sheet, fasteners, forgings, etc., to achieve maximum customer satisfaction. One can avail our Hastelloy Steel C22 at pocket-friendly prices. Specifications UNSBarASTM B574Wire-SheetASTM B575PlateASTM B575FittingASME SB-366ForgingASME SB-564Weld Wire-Weld Electrode- Chemistry Chemical RequirementsNiCrMnCMoSiFeMaxBal.22.50.500.01514.50.086.0Min20.012.52.0 Tensile Data Mechanical Property RequirementsUltimate TensileYield Strength (0.2% OS)Elong. in 2 in. (50.8mm) or 4D min., %RAHardnessMin100 KSi45 KSi45MaxMin690 MPa310 MPaMax Recommended Tool Types and Machining Conditions OperationsCarbide ToolsRoughing, with severe interruptionRoughing, with severe interruptionNormal roughing Turning or Facing C-2 or C-3 grade: Negative rate square insert, 45 degree SCEA, 132 in nose radius. Tool holder: 5 degree neg. back rake, 5 degree neg. side rake. Speed: 90 sfm depending on rigidity of set up, 0.010 in. feed, 0.150 in. depth of cut. Dry, oil, or water-base coolant. Finishing Turning or Facing C-2 or C-3 grade: Positive rake square insert, if possible, 45 degree SCEA, 132 in. nose radius. Tool holder: 5 degree pos. back rake, 5 degree pos. side rake. Speed: 95-110 sfm, 0.005-0.007 in. feed, 0.040 in. depth of cut. Dry or water-base coolant. Rough Boring C-2 or C-3 grade: If insert type boring bar, use standard positive rake tools with largest possible SCEA and 116 in. nose radius. If brazed tool bar, grind 0 degree back rake, 10 degree pos. side rake, 132 in. nose radius and largest possible SCEA. Speed: 70 sfm depending on the rigidity of setup, 0.005-0.008 in. feed, 18 in. depth of cut. Dry, oil or water-base coolant. Finish Boring C-2 or C-3 grade: Use standard positive rake tools on insert type bars. Grind brazed tools as for finish turning and facing except back rake may be best at 0 degrees. Speed: 95-110 sfm, 0.002-0.004 in feed. Water-base coolant. Facing Milling Carbide not generally successful, C- grade may work. Use positive axial and radial rake, 45 degree corner angle, 10 degree relief angle. Speed: 50-60 sfm. Feed: 0.005-0.008 in. Oil or waterbase coolants will reduce thermal shock damage of carbide cutter teeth. End Milling Not recommended, but C-2 grades may be successful on good setups. Use positive rake. Speed: 50-60 sfm. Feed: Same as high speed steel. Oil or water-base coolants will reduce thermal shock damage. Drilling C-2 grade not recommended, but tipped drills may be successful on rigid setup if no great depth. The web must thinned to reduce thrust. Use 135 degree included angle on point. Gun drill can be used. Speed: 50 sfm. Oil or water-base coolant. Coolant-feed carbide tipped drills may be economical in some setups. Reaming C-2 or C-3 grade: Tipped reamers recommended, solid carbide reamers require vary good setup. Tool geometry same as high speed steel. Speed: 50 sfm. Feed: Same as high speed steel. Tapping Not recommended, machine threads, or roll-form them. Electrical Discharge Machining The alloys can be easily cut using any conventional electrical discharge machining system (EDM) or wire (EDM). Plasma Arc Cutting Our alloys can be cut using any conventional plasma arc cutting system. The best arc quality is achieved using a mixture of argon and hydrogen gases. Nitrogen gas can be substituted for hydrogen gases, but the cut quality will deteriorate slightly. Shop air or any oxygen bearing gases should be avoided when plasma cutting these alloys.
Hastelloy Steel C22 can easily be cold-worked because of its ductility and cold-forming is the preferred method of forming. More energy is required because the alloy is generally stiffer than austenitic stainless steels. 0.28" thick sheet in the heat-treated at 2050oF, rapid quenched condition, has an average olsen cup depth of 0.49".
Ratings
Nickel & cobalt base corrosion, temperature and wear-resistant alloys are classified as moderate to difficult when machining, however, it should be emphasized that these alloys can be machined using conventional production methods at satisfactory rates. During machining these alloys work harden rapidly, generate high heat during cutting, weld to the cutting tool surface and offer high resistance to metal removal because of their high shear strengths. The following are key points which should be considered during machining operations :
Note
We manufacture Inconel Steel which is tested at every stage of its production. Our Inconel Steel is of the best quality and possesses excellent corrosion, temperature and acid resistance. We offer Inconel Steel in various forms such as wire, sheet, bar, plate, coil, etc., as per the requirements of the clients.
Applications
Characteristics
Technical Specifications
Form | Standard |
---|---|
Metal Type | UNS N06625 |
Bar | ASTM B446 AMS 5666 BS3076 |
Wire | AMS 5837 |
Sheet | ASTM B443 AMS 5599 BS3072 |
Plate | ASTM B443 AMS 5599 BS3072 |
Pipe | ASTMB444 ASTM B704 AMS 5581 BS3074 GEB50TF133 |
Tube | ASTM B444 ASTM B704 AMS 5581 BS3074 GEB50TF133 |
Fitting | ASTM B366 Din 17754 |
Forging | - |
Weld Wire | - |
Weld Electrode | - |
NA 21 | All forms |
Din | 2.4856 |
Chemical Requirements
Ni | Fe | Cr | Si | Mo | Mn | C | |
---|---|---|---|---|---|---|---|
Max | 5.0 | 23.0 | 0.50 | 10.0 | 0.50 | 0.10 | |
Min | 58.0 | 20.0 | 8.0 |
Tensile Data
Mechanical Property Requirements | |||||
Ultimate Tensile | Yield Strength (0.2% OS) | Elong. in 2 in. or 50mm or 4D, min., % | R/A | Hardness | |
Cold Worked/Annealed | |||||
Min | 120 KSI | 60 KSi | 30 | ||
Max | |||||
Min | |||||
Max | |||||
Hot Worked/Annealed | |||||
Min | 120 KSi | 60 KSi | 30 | ||
Max | |||||
Min | |||||
Max |
Recommended Tool Types and Machining Conditions
Operations | Carbide Tools |
Roughing, with severe interruption | Turning or Facing C-2 and C-3 grade: Negative rake square insert, 45 degree SCEA1, 1/32 in. nose radius. Tool holder: 5 degree neg. back rake, 5 degree neg. side rake. Speed: 30-50 sfm, 0.004-0.008 in. feed, 0.150 in depth of cut. Dry2, oil3, or water-base coolant4. |
Normal roughing | Turning or Facing C-2 or C-3 grade: Negative rate square insert, 45 degree SCEA, 1/32 in nose radius. Tool holder: 5 degree neg. back rake, 5 degree neg. side rake. Speed: 90 sfm depending on rigidity of set up, 0.010 in. feed, 0.150 in. depth of cut. Dry, oil, or water-base coolant. |
Finishing | Turning or Facing C-2 or C-3 grade: Positive rake square insert, if possible, 45 degree SCEA, 1/32 in. nose radius. Tool holder: 5 degree pos. back rake, 5 degree pos. side rake. Speed: 95-110 sfm, 0.005-0.007 in. feed, 0.040 in. depth of cut. Dry or water-base coolant. |
Rough Boring | C-2 or C-3 grade: If insert type boring bar, use standard positive rake tools with largest possible SCEA and 1/16 in. nose radius. If brazed tool bar, grind 0 degree back rake, 10 degree pos. side rake, 1/32 in. nose radius and largest possible SCEA. Speed: 70 sfm depending on the rigidity of setup, 0.005-0.008 in. feed, 1/8 in. depth of cut. Dry, oil or water-base coolant. |
Finish Boring | C-2 or C-3 grade: Use standard positive rake tools on insert type bars. Grind brazed tools as for finish turning and facing except back rake may be best at 0 degrees. Speed: 95-110 sfm, 0.002-0.004 in feed. Water-base coolant. |
Facing Milling | Carbide not generally successful, C- grade may work. Use positive axial and radial rake, 45 degree corner angle, 10 degree relief angle. Speed: 50-60 sfm. Feed: 0.005-0.008 in. Oil or waterbase coolants will reduce thermal shock damage of carbide cutter teeth. |
End Milling | Not recommended , but C-2 grades may be successful on good setups. Use positive rake. Speed: 50-60 sfm. Feed: Same as high speed steel. Oil or water-base coolants will reduce thermal shock damage. |
Drilling | C-2 grade not recommended, but tipped drills may be successful on rigid setup if no great depth. The web must thinned to reduce thrust. Use 135 degree included angle on point. Gun drill can be used. Speed: 50 sfm. Oil or water-base coolant. Coolant-feed carbide tipped drills may be economical in some setups. |
Reaming | C-2 or C-3 grade: Tipped reamers recommended, solid carbide reamers require vary good setup. Tool geometry same as high speed steel. Speed: 50 sfm. Feed: Same as high speed steel. |
Tapping | Not recommended, machine threads, or roll-form them. |
Electrical Discharge Machining | The alloys can be easily cut using any conventional electrical discharge machining system (EDM) or wire (EDM). |
Plasma Arc Cutting | Our alloys can be cut using any conventional plasma arc cutting system. The best arc quality is achieved using a mixture of argon and hydrogen gases. Nitrogen gas can be substituted for hydrogen gases, but the cut quality will deteriorate slightly. Shop air or any oxygen bearing gases should be avoided when plasma cutting these alloys. |