Allied Solutions (I) Pvt. Ltd.

Govandi, Mumbai, Maharashtra

Symetric And Nano Flat Drip Irrigation Pipe Production Line

The creation of highest level technology and experience Damla Plast Flat Drip Irrigation Pipe Line can produce flat irrigation pipes which is the new shining star af irrigation systems in a safe and fast way while all operations are under control. There are special systems in the machine that allows you to make production of different diameter and net thickness and this system will provide the best diffusion between pipes and drippers, will check the accuracy of drilled holes and will detect errors on the product such as rupture.

Damla Plast, as usual, did not compromise the quality for this machine, established the principles such as high efficiency, easy to use, fast service, spare parts supply from stock and has offered these to our esteemed customer.

Throughout the project, for our esteemed customers working with us, solutions are created for preliminary examination, installation and commissioning, training, staff support, mold and other necessary equipments.

Round Drip Irrigation Pipe Production Line

It is possible to produce Round Drip Irrigation Pipes in a fast, safe and controlled manner with Round Drip Irrigation Pipe Machine that is the work of advanced technology and experience.

Damla Plast, as usual, did not compromise the quality for this machine, established the principles such as high efficiency, easy to use, fast service, spare parts supply from stock and has offered these to our esteemed customer.

Throughout the project, for our esteemed customers working with us, solutions are created for preliminary examination, installation and commissioning, training, staff support, mold and other necessary equipments.

Extrusion lines for foils, sheets and multicellular panelsAMUT applies more than 50 years experience in plastic sheet extrusion to offer its Customers complete and technologically advanced lines to produce foils and sheets from a wide range of thermoplastic materials, to be used for a large number of different applications.The AMUT production range includes extrusion lines with nominal width from 400 to 3300 mm and thickness from 150 microns for foils up to some centimeters for sheets or multicellular panels.The number of co-extruders is defined depending on the specific needs of the customer and the characteristics of the finished product. Using the AMUT extrusion lines, sheet configuration up to 9 layers and output capacity over 4000 kgs per hour can be obtained.

Food PackagingSheet for thermoformed food packaging, with and without barrier layer. Layers can be co-extruded or laminated for airtight seal. They can be treated for printing or metalizing. Specialty execution for form fill-seal automatic lines.
Materials: PET, PS, PE, PP, EVA, EVOH.

Multipurpose and Pharmaceutical Blister PackagingSheet for thermoformed packaging for consumer goods display, for medicine tablets or capsules blister, treated for the hermetic seal welding or bonding.
Materials: PET, PVC.

Paper & Cardboard IndustrySheet and foils for stationery items (binders, folders, catalogues, files) or gift, cosmetic and perfume boxes packaging. Single or multilayer foils, with surface embossing and treatment for printing, cut and stacked in reams for further process.
Materials: PET, PP, PVC.

WaterproofingWaterproofing membranes for building industry and civil infrastructure (protective covering, flat roofing, tunnels and subways, train track and roadway beds, bridges). Single or multilayer membranes, with inner reinforcement and fleece bonding for support, surface embossing and aesthetic finishing. Specialty execution for dimple or deep-drawing membranes to insulate the concrete foundations from soil.
Materials: F/PVC, TPO, HDPE.

Furniture IndustrySingle or co-extruded sheets for panels covering of domestic furniture, mostly kitchens. Also for edge bands production, with wood grain surface embossing, primer coating, printing with UV drying system.
Materials: ABS, PMMA, PVC, PP.

Refrigerator Industry and Bathroom FurnishingSingle or co-extruded sheets to be thermoformed for refrigerator doors or bathroom furnishing such as shower pans, basins, bath tubs, corner shower fittings. Surface treatment for foam application, bright and glossy finishing. Automatic cutting and stacking.
Materials: PS (HiPS and GPPS), ABS, PMMA.

Medical BagsNon-toxic foils for medical bags to be used for transfusion, dialysis or phleboclysis. Glazing or embossing surface finishing, to prevent foils from adhering during the sterilization cycle in autoclave.
Materials: PVC, PP.

Multicellular PanelsPolypropylene Cartonplast for stationery items.Single or multi-chamber Polycarbonate panels for the building industry.
Materials: PP, PC.

PhotovoltaicsFoils for the encapsulation of silicone modules used in solar panels production. Embossing finishing and in-line cross-linking treatment, partial or total.
Materials: EVA.

AutomotiveFoils and sheets for large application in this field.Sound deadening sheet for engine compartment, sheets bi-laminated with nonwoven layers for interiors (passenger and trunk compartments), co-extruded sheets to be thermoformed for car door covering.
Materials: PP, TPO, PVC.

Speciality ExecutionMany different special applications, among which:

• Corrugated sheet, co-extruded from LDPE foam, for the industrial packaging of bulky products (coils, plates, stainless steel pipes, etc.)
• Transparent sheet for hobby works and bricolage, extruded from PS crystal (GPPS)
• Flexible sheet for gaskets or sealing units, extruded from fluoropolymers (PFA, PVDF, Teflon)
• Foil for artificial leather, table cloths, industrial curtains and room partitioning, extruded from Flexible PVC

AMUT DOLCI BIELLONI offers a wide range of cast line for the production of Polipropilene film (CPP), equipped with:

• New barrier low shear design to improve melt quality and reduce energy consumption, specifically designed for Polipropilene resins
• Optimal L/D ratio for perfect melt quality production
• Heaters bands for quicker heating and lower energy consumption
• Vector motors, lower power consumption
• Reduced length of connection necks between extruders and feed block
• Cast extrusion die with "positive inclination on the chill-roll
• Trims reprocessing unit with compactor and forced feeder

The result of the abovementioned features is low power consumption per kg of film produced.

Single stage extrusion coating lines for the production of coated paper, coated non-woven/woven webs for food packaging, industrial application and disposable items.

Single stage extrusion coating / laminating lines for the production of paper / PE / alufoil webs or BO films / PE / Metallized BO films for pharmaceutical, cosmetic, industrial or general applications.

Double stage extrusion coating / laminating lines for the production of complex-multicoated webs for pharmaceutical, cosmetic, food pack, industrial, sanitary and insulation industry.

Tripe stage extrusion coating / laminating lines for the production of multilaminated paper board for UHT aseptic (liquid) packaging.

Production Range:Line width: from 800 to 2500 mmLine speed: up to 200 or up to 500 m/minRolls diameter: from 800 to 1600 mmExtrusion dies: Non-automatic or automatic with external or internal deckling systemExtruders size: from 55 to 180 mmRange of up-stream / downstream accessories: Corona or flame treater, ozonizing bars, reversing bars, primer stations, single or differential gauge controls, in-line flexo printing stations, in line creasing stations, video camera and web inspection instruments.Type of unwinders: semi-automatic or automatic turret type (flying spice), butt-splicers shafted or shaftless

Type of rewinders: contact type or automatic turret type with in-line multi-slit station, shaftless or shafted

PE Pressure & Non Pressure Structured Wall Pipes up to 4000mmKrah AG, the German machine manufacturer, has developed a complete production line to produce pressure pipes in diameters ranging from DN/ID 300mm to DN/ID 4000mm made of a compound of polythelene reinforced with fibres to unite the well-known properties of thermoplastics with the significant characteristics of fibers.

The machine is designed similar to the well established KR Series production machines, applying the winding process to produce pressure pipes up to 10 bar working pressure. Moreover it can be upgraded to the characteristics of the conventional KR Machine, so that now one single machine, the so called KDR machine, is able to produce structured wall Non-Pressure Pipe Systems as well as solid wall PE-GFR Pressure Pipe Systems.

However, the equipment is not only designed to manufacture the pipes themselves, but it is able to produce an integrated electro fusion joint and the complete range of fittings for pressure as well as non-pressure applications.

High production output, enormous flexibility, short setup and change over times, simple operation, a perfect joint and more application facilities for the products are the main characteristics of all Krah machines.

Moreover, the customer decides which pipe diameters are needed to satisfy the market requirements and he purchases only the necessary production tools for these pipe diameters. This allows the customer the optimum choice of equipment with the possibility to upgrade the equipment later by purchasing production tools in other diameters. Such an upgrade does not require any modifications to the machine. Furthermore every pressure class can be produced without the necessity to invest in further dies or special tools.

Various formulations of high density polyethylene (PE 63, PE 80, PE 100) can be used to produce the requested end product, thus providing all positive characteristics compared to other stiff pipe materials like concrete, steel, etc.

The DR Series is designed to produce, in the most economical and ecofriendly way pipes, fittings and manholes in diameters ranging from DN/ID 300mm to DN/ID 4000mm and in lengths from 1m up to 6m and on special request even longer, 6m pipe length has become a standard length because of their easy to transport and handling.

The quality of the PET flakes manufactured by the AMUT recycling technology is almost comparable to the virgin PET:

• The glue residuals are almost absent
• PVC and floating material are reduced to the minimum
• The organic residuals are traced between 0 and 70 ppm
• Residual of soda is insignificant, as confirmed by the measurement of pH rise

The above performances enable AMUT to obtain a material free of black specks, with Colour b and delta Colour b that make it suitable not only for fibers, but also for more complex applications, such as:

• Bottle-to-Bottle
• Bottle-to-Packaging
• Strapping where the final product requires a subsequent degradation treatment

Standard plant sizes (output): 500, 1250, 2000, 2500, 3000, 4000 kg/hFlexibilityThe plants are supplied on a turnkey basis or according to the customerBottle-To-Bottle requirements. Thanks to the modular construction, the plant can be installed both into existing buildings and new projects. Therefore it is also possible to integrate the modular units for bottles pre-washing and flakes washing into the existing plants.

With AMUT DOLCI BIELLONI extrusion lines synergically conceived with the clients, several products of daily use are obtained: carrier bags, refusal sacks, thermoshrinkable film, stretch hoods, stretch films, bags for vacuum/ controlled atmosphere food packaging, film for diapers, coextruded film for the most diversified packaging applications and for agrifilm.

Co-extrusion lines from 3 to 9 layers structures with different level of automation, including:

• Gravimetrics for resins and recipes
• Automatic cooling rings for accurate film thickness control
• Automatic manipulators for shaft, rolls and cores handling

EVA, Ethylene-Vinyl-Acetate, is the type of material produced with AMUTs extrusion foil line and it is especially reserved for the production of solar-photovoltaic panels.EVA foil protects the photovoltaic cell, encapsulating and wrapping the silicon cells, and enables a perfect sealing and a high adherence with the outer glass sheet and with the back-sheet (lower layer).

The EVA foil delivered with AMUT lines assures:

• The maximum light transmission;
• The absence of deformations or shrinkages;
• A great capacity to achieve a good cross-linking level (necessary to end the panel lamination very quickly);
• The satisfaction of TV or CEI EN 50086 certificates requirements.

All units of the line are purposely designed for this application and to not compromise the foil dimensional stability.

There is not cross-linking during the extrusion process.

The innovative winding system can wind-up, directly in-line, the foil in reels or permit to laminate in-line a separating film sheet (mask film) or a silicone paper foil to protect EVA foil completely.

Materials:PVC, PP

The output satisfies the medical industry requirements: dimensional precision, reduced tolerance in production, clear or mat surface and absolutely no contamination allowed.

According to diameters, thickness, geometry and production that customer requires, the extrusion lines for medical tubing count on different models of extruders and heads.

A perfect calibration is ensured inside the vacuum tank, where a modulating control interacts with diameter measuring system, adjusting the vacuum if necessary.

Water immersion cooling tunnels are sized in length depending on the throughput required and are closed type to prevent any possible contamination. Process water is filtered using a special filter to ensure its purity.

Finished product is rolled up on cantilever reels, to avoid contact with floor while the reel is automatically changed by the system. Winding system is controlled by a non-contact sonar device, to prevent tension on tubing while the reel is forming.

Harden is well established in design and building extrusion lines for polymer processing since 2006. The company has always been leading the industry in developing precision small extrusion lines and laboratory extrusion equipment. As FDM technologies is being becoming popular, Harden set up a subsidiary specialized in supplying 3D printing filament production lines.

Product Application-3D Printer Filament Extrusion Line

3D printing filament production lines are available in three functionality options and a desk-top version is also available for small lab scale production and testing.

HARDEN is dedicated to provide the best small extrusion lines and service for you from China. Our extruders are famous for its melt quality, pressure stability, zero down time, easy operation, and short start-up time. With these features, customers get an advantage of high production rate, high product precision, and very low rate in material waste.

Main Features of 3D Printer Filament Extrusion Line:

• Using SIEMENS touch operation, real-time display of the running state, alarm information and system parameters
• PID temperature control, the accuracy up to 1
• Pressure closed loop control is used to improve the stability of the extrusion pressure and the uniformity of the 3D printer filament
• The traction unit using imported servo motor drive and is composed of the closed-loop control system with diameter measuring instrument, which can quickly respond to the change of the speed of the extruder, so as to achieve the requirement of the accuracy
• The use of special winding tension transducer, to ensure the tension balance, rolling smooth and tidy, to avoid the phenomenon of knot
• Remote monitoring can be achieved for you to build an intelligent automatic to provide convenient conditions

Telia 8 FSC is the latest development of the FSC (Fast Sleeve Change) system applied to our gearless technology.

Main features:

• Totally interchangeable printing decks with identical mechanical components for each deck to simplify maintenance;
• Dual high precision linear guides;
• Step-by-step motors to repeat every position previously recorded;
• New self-cleaning pneumatic doctor blade chamber;
• "FSC" system for sleeve change and rapid deck opening with horizontal movement;
• Integrated automatic deck wash-up system;
• Air Recirculation Bridge to increase drying efficiency;
• Motorised bridge threading and passage;
• Pressure and register remote control;
• Electrical equipment in climate controlled container.

Technical Data:

• Number of decks : 6/8/10 with or without in line roto or flexo units
• Useful printing width : up to 2.200 mm (87")
• Anilox and plate cylinder : sleeve type
• Minimum print repeat : 300 mm
• Maximum print repeat : 900 mm
• Mechanical speed : 500 m/min

Telia Maxi is the latest development of the FSC (Fast Sleeve Change) system applied to our gearless technology.

Main features:

• Totally interchangeable printing decks with identical mechanical components for each deck to simplify maintenance;
• Dual high precision linear guides;
• Step-by-step motors to repeat every position previously recorded;
• New self-cleaning pneumatic doctor blade chamber;
• "FSC" system for sleeve change and rapid deck opening with horizontal movement;
• Integrated automatic deck wash-up system;
• Air Recirculation Bridge to increase drying efficiency;
• Motorised bridge threading and passage;
• Automatic Pressure and register control system;
• Electrical equipment in climate controlled container.

Technical Data:

• Number of decks : 6/8/10
• Useful printing width : up to 2.800 mm (87")
• Anilox and plate mandrels : carbon fibered
• Minimum print repeat : 350 mm
• Maximum print repeat : 1.100 mm (43") - 1.250 mm (49") - 1.400 mm (55")
• Mechanical speed : up to 450 m/min

With horizontal or vertical coiling axis (plate winder) for spools or drums, these machines guarantee to coil various profiles without applying tension.

Options:

• Special dimensions for swift arms
• Length measuring device
• Ultrasonic dancer control
• Accumulator
• Adhesive Tape dispensor
• Transport rollers
• Precision traverse control with ball spindle and servodrive
• Up-rated drives
• Control panel for automatic storage and retrieval of process parameters
• Integrated cutting unit

Advantages:

• Sturdy design
• Long lasting components, low maintenance
• Compact dimensions
• Good coiling quality by using latest drive technologies
• Safety guards
• Many options allow to modify the coiler to special
• Customer requirements

Canei Corp:Founded in 2012, CANEI is a company that supplies near Prime Recycled Plastic Raw Materials like HDPE, LDPE and PP to clients around the world. With offices in Canada & China as well manufacturing facilities in Taiwan, they are able to appropriately provide clients with a competitive advantage.

Main applications include Film, Blow Moulding, Injection Moulding, Pipes & Raffia.

HDPE KRM 100

High Density PolyethyleneHDPE KRM 100 is a high density polyethylene compound (Black) produced by the ultimate Koremplast technology. Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties. Carbon black gives outstanding UV resistance.

Application:Extrusion (pipes not in pressure)

Informative Tensile properties in accordance to EN ISO 527

• Tensile strain at break (%)700 - 950 Informative
• Tensile strength at Yeld (Mpa)22 - 28 Informative
• Tensile strength at break (Mpa)24 - 30 Informative
• Tensile Modulus (Mpa)800 - 1200 Informative

Graewe products stand for high productivity, low operational, maintenance and service costs and shorter delivery time.

Vacuum, calibration and cooling tanks

• Belt and caterpillar haul-off
• Adjustable pressure for delicate hoses and profiles
• High Precision driven via AC servo drive
• Cutting units
• Cutting Saw and Planetary Saw
• Cutting and Chamfering machines, servo cutters

Automatic Winders

• Driven by maintenance free AC servomotor
• Precise traversing
• Automatic feeding
• Automatic change-over

Features:

• C.I. Dum 1410 Mm - Chrome Plated
• Horizontal-Sequential Throw-Off
• Automatic In-Register Pre-Setting
• Frame And Decks Thickness 100 Mm
• Pneumatic Locking
• In And Out Motorised Decks
• Automatic Turret Rewinder
• Extended Drying
• Three Automatic Tension Controls

Technical Data:

• Number of decks 6
• Type of inks : solvent based
• Useful printing width (max) : mm 800 (31, 5") - 1000 (39") - 1200 (47 3/4 ") - 1400 (55")
• Web widht (max) : mm 920 (36") - 1120 (44") - 1320 (52") - 1520 (60")
• Minimum print repeat : 340 mm (13")
• Maximum print repeat : 1050 mm (41")
• Maximum mechanical speed : 280 m/min
• Central Drum Diameter : 1410 mm (55, 5")
• Print Structure thickness : 100 mm
• Anilox Cylinder diameter : 127 mm (5") - 150 mm (6")
• Rack in out of each printing station : motorized
• Longitudinal register : motorized
• Horizontal register : motorized
• Sequential Trough off : Yes

Next Machines offer over 400 extrusion machines and downstream machines made by GRAEWE and other manufacturers.

Tested quality from the market leader:

Ensure Tender, advice and quality check in all respects when purchasing extrusion machines. Assured that the wear parts of every machine have been renewed and the most important aggregates have been overhauled or replaced, this means tested quality from the market leader.

Large choice and fast availability:

The extrusion machines form an important part of process cycle. An unexpected failure can have grave consequences for production. To prevent this, one of the mainstays of our range of services is fast availability. From a range of more than 400 extruders and extruder downstream equipment, select the type that is exactly tailored to your purpose at a reasonable second-hand price.This will make decision-finding process easier for projected purchases. For us it is important not to deliver the extrusion machine before the machine has been submitted to an all-inclusive professional inspection, to a thorough servicing, and not before any repairs that were required have been completed.

Our Service Comprises, Among Other Points:

Overhaul, respectively replacement of screw and cylinder

Replacement of melt pressure and temperature sensors

Replacement of the sealing packages and gas removal pumps

Replacement of heaters

Overhaul of the motor

Checking of the gears

Gear oil change

Oil filter change

Replacement of the V-belts

Our Special Next Service Comprises:

Finishing customized to clients colours

Trial run

Recording of the output capacity.

Universal experience for individual solutions:

Over the past 20 years Next Machines sold well over 4000 second-hand extrusion machines and have become an established market leader in this market segment.

Every single installed system differs a little from the next - and all the experience and know-how gathered over the past two decades will flow into an individual solution for your special requirements. And, because the special details often become so very important, it shall be our pleasure to invest some more time in consultation and advice.

To get notification and updates on New Second Hand Machines simply fill in the form given below. You will receive appropriate details in your inbox shortly.

Control Technology for Hot Runner Systems: Safe and Comfortable

1, 2, 3, 5-channel temperature controllers DP1, DP2The compact controllers for economical and comfortable control of small hot runner systems.

• Total connected value 1-phase 230 V 16 A
• Fuzzy PID control behaviour
• Set / actual display for each control point
• Gentle softstart function
• Pulse group control
• Power limitation
• Temperature reduction during production breaks
• Regulated operation in case of failed thermal probe possible
• Counter for hours of operation
• Continual error monitoring

Multi-channel temperature controllers DPT5, DPT10, DPT15, DPT20, DPT45The multiple controllers of the DPT series offer extensive functions for the safe control of complex hot runner systems.

• Four selectable temperature programs
• Fuzzy PID control behaviour
• Gentle softstart function
• Control-TechnologySet/actual display for each control point
• Limited power during start-up
• Start-up ramp for even heating of different heating circuits
• Phase control and pulse group control
• Temperature reduction during production breaks possible
• Regulated operation in case of failed thermal probe possible
• Diagnostic function for detection of wiring errors
• Up to 3500 W per control zone
• Counter for hours of operation
• Continual error monitoring
• Connectors of thermocouples and heating elements physically separated
• Retrofitting of up to 15 control zones is feasible
• Optional with serial interface for connection of injection moulding machines by ARBURG, ENGEL, KRAUSS-MAFFEI, FEROMATIK, etc.

Multi-channel temperature control cabinet DPT multi zone for operation with multiple tools with a high number of cavities.

This new development especially for the operation of multiple tools with a high number of cavities offer a comprehensive range of functions:

• Expandable from 40 up to 150 control circuits (in steps of 5), the LCD touch-screen display guarantees the simplest operation for highly complex tools.
• The control is executed by means of a Windows software.
• Graphic tool display with freely moveable display fields.
• Full-text error messages.
• Log files for monitoring errors and status.
• Possibility of managing two tools separately.
• Print function for temperature records.
• Various remote maintenance possibilities via standard PC interfaces.

Controller eValve-4The controller "eValve-4" is able to control up to four bistable electromagnets, which are used for nozzles with needle valve. The electrical lift magnets generate a mechanical lift of 10 mm. The two end position are fixed with permanent magnets. Electric power is only used for changing the position of the magnetic fixed lifting cylinder.

We have been involved in the polyethylene pipe industry since 1963 and provides products, services and advice of specific value to manufacturers, fabricators, Engineers, installers and end users of polyethylene pipe systems, from entry level to mature operations, looking for new supply options and market expansion possibilities.

Our Butt Fusion Machines have been researched, developed and are fully CE approved and manufactured under ISO 9000, certified by SGS (www.sgs.com). Production and component quality is of the highest level, with warranty support provided by us without delay. The products of our company include Manual Butt Fusion, Hydraulic Butt Fusion and Multi-Angle Butt Fusion with Data Logging.

Our services include training and certification in Butt Fusion by accredited trainers, and consulting by highly experienced professionals.

Our Butt Fusion Machines comply with the requirements of welding standards, and are in constant use by pipe manufacturers, fabricators and contractors worldwide.

With more than 10 years experience in plastic machinery industry, Harden Technologies Ltd. is specialized in developing, manufacturing and marketing a range of plastic extruding for compounding, recycling and pelletizing, and relevant auxiliary equipments. SAN-U is one of brands under the Harden umbrella.

Working together with some world best suppliers, SIEMENS, MITSUBISHI, B&R, SCHNEIDER, RKC, ABB, etc., they provide the customers with high quality extrusion equipment with affordable price.

Equipped with several advanced processing and inspecting machinery imported from Japan and UK, they can supply reliable spare parts and components which guarantee their service and support.

HARDEN production program includes:
Plastic Extruder

• High Speed Single Screw Extruder
• Co-Rotating Twin Screw Extruder
• Counter-Rotating Twin Screw Extruder
• Two Stages Extruder

Using the partial pressure method, Nitrox and/or Trimix can be mixed and filled safely, easily and accurately using our Pro or Classic filling panels. The panels are tested and certified for 100% oxygen and/or helium mixing for all your breathing gas requirements. Practical valve and gauge layout makes operation easy to learn and use.

For pure oxygen compatible air (OCA), we recommend using the Puracon air controller and/or an extra filter mounted on the panel.

Wall mounted panels for safe and easy partial pressure gas blending. All gas inlets are fitted with isolation valves, non return valves and flow restrictors. The oxygen/helium gas pressure can be read on individual pressure gauges without the need to open the valves which makes efficient gas cascading quick and simple. The design of the panels has been approved by the stringent German TV authorities as suitable for use in Nitrox, Trimix and Heliox applications.

The Panels have a removable rear cover which makes wall mounting very simple and are powder coated in RAL 6026. All the pipework and the connections are stainless steel providing years of trouble free service and safe gas flow. The valves are industrial quality.

AMUT DOLCI BIELLONI delivers Stretch Film Lines from 3 to 7 layer configurations (as standard configurations) or with Micro layer / Nanolayer technology (27 - 31 or more layers). Net width available is from 1 up to 4 meters, for net productions up to 2300 kg/h.

Design of new screw profiles to comply with newly introduced resins and film formulations.

New generation of high-speed automatic winders, capable to reach 1000 m/min speed

WINDERS

High speed
Automatic winder for hand and machine rolls, bleeded or bleedless
Automatic robotized winder for machine and Jumbo Rolls, bleed or bleedless
All winders with automatic re-coring and cores storage

Automatic winders for HAND, MACHINE and JUMBO rolls.

BIELLOFLEX Axsa ST Servo Drive is the latest development in our range of Stack presses with servo-drives and sleeves change system and it has been designed to print on tubular film for heavy duty sacks, woven sacks, pet food sacks.

Main features:

• Mechanical speed up to 300 m/minute and 1300 mm. (51") maximum print repeat.
• All the printing units are remotely controlled and include a fast sleeves change system.
• The printing section can be also installed in-line with existing extrusion lines to print 4+4 or 6+2 colours.
• The machine includes a new automatic winder for 1500 mm. (59") diameter jumbo rolls with an innovative splicing system that can handle webs having up to 400 my thickness.
• Available in 8, 6 and 4 colour versions, all of them based on the servo-driven technology that allows a quick register set up and, eventually, an automatic register control.

Technical Data:

• Number of decks : 4-6-8
• Useful printing width (stand alone machine) : up to 1.600 mm (63")
• Useful printing width (in-line with extrusion lines) : up to 2.300 mm (90, 5")
• Minimum print repeat : 300 mm (12")
• Maximum print repeat : up to 1.300 mm (51")
• Mechanical speed : up to 300 m/min

The needles can be moved with single valve gate nozzles and in multiple nozzle and manifold systems with

• Electromagnet
• Single needle valve
• Lifting plate
• Sliding plate mechanism

Special holes in the mould clamping plate allow the depth of the shut-off needles to be adjusted individually from the outside.

Elektromagnet ME 10/UV 75Electric drive for valve-gate systems.

The compact drive mechanism is designed for valve gate systems with drive in the clamping plate. Up to 4 needles can be controlled simultaneously and very precisely by means of an external controller (eValveControl-4). Option of 8-drop parallel operation.

• For all-electric injection moulding machines
• Unrestricted clean-room suitability
• Maintenance-free