Our Products
Flush Doors
1 Products availableWood Boards
1 Products availableCargo & Shipping Services
1 Products availableWood And Lumber
1 Products availableLeading Manufacturer, Supplier & Retailer of ALISHAN CRYSTAL PLY.
USP :Engineered wood flush door shutters with
Quality :IS 2202 certified.
Promise:100% protection against termites and borers.
Adhesive :High quality phenol formaldehyde synthetic resin of BWP grade is used for bonding.
End uses :Doors that combine strength and aesthetic appeal.
Door range :
USP :Made from single wood species Gurjan, imported from South East Asia. Designed specifically for construction, repair and maintenance of marine and river craft.
Quality :IS 710 certified.
Promise :100% protection against wood borers, termites, beetles & fungus.
Rigor proof :Bonded with very high quality phenol formaldehyde synthetic resin of BWP grade and treated with right preservatives to survive rigorous conditions - temperature changes, humidity and alternate wetting & drying faced by marine and river craft.
Solid testing :Tested for 72 hours at 100c.
Sizes (mts.) :2.44x1.22, 2.44x0.92, 2.14x1.22, 2.14x0.92, 1.84x1.22, 1.84x0.92
Thickness (mm) :3, 4, 6, 9, 12, 16, 19, 25
End uses :Construction, repairing and maintenance of marine and river craft.
All types of furniture / partitions / wall paneling etc.
A) 43.000 N/mm2in the direction parallel to grain of the face veneers |
B) 25.50 N/mm2in the direction of the right angles to grain direction of the face veneers |
C) 85.00 N/mm2the sum of the tensile strength in both directions |
Grade | BWP (boiling water proof) | |
Tolerances | Dimension | Tolerances |
Thickness upto 4 mm | +/-10% | |
Above 4 mm | +/-5% | |
Width upto 90 cm | +3 mm | |
Length upto 120 cm | +6 mm | |
Moisture content | 8% - 10% | |
Preservative treatment | Acid copper chrome composition | |
Mycological test | Complies with the requirement | |
Glue shear strength (average) dry state | 1425 N |
USP :Made from single wood species Gurjan, imported from South East Asia. Designed specifically for construction, repair and maintenance of marine and river craft.
Quality :IS 303 certified.
Promise :100% protection against wood borers, termites, beetles & fungus.
Rigor proof :Bonded with very high quality phenol formaldehyde synthetic resin of BWR grade and treated with right preservatives to survive rigorous conditions - temperature changes, humidity and alternate wetting & drying - faced by marine and river craft.
Solid testing :Tested for 8 hours at 100c.
Sizes (mts.) :2.44x1.22, 2.44x0.92, 2.14x1.22, 2.14x0.92, 1.84x1.22, 1.84x0.92
Thickness (mm) :3, 4, 6, 12, 16, 19, 25
End uses :All types of furniture, wall paneling,
partitions, penal insert of panel door, false ceiling etc.
USP :Uses only one species of timber as specified by the IS standards. New Zealand pine is used as the cross core and face veneer.
Quality :IS 1659 certified.
Promise:100% protection against termites and borers .
Chemical mix :Bonded with very high quality phenol formaldehyde synthetic resin of BWP Grade.
Solid testing :Tested for 72 hours at 100c.
End uses :Furniture, partitions, panelling, pre-fabricated houses, railway carriages, bus bodies etc.
Sizes (mts.) :2.44x1.22, 2.44x0.92, 2.14x1.22, 2.14x0.92, 1.84x1.22, 1.84x0.92
Thickness (mm) :16, 19, 25
End uses :Furniture, partitions, paneling, pre-fabricated houses, railway arriages, bus bodies etc
USP :Alishan Decorative Plywood is made from rare wood veneers procured from overseas with Gurjan veneer as core and bottom.
Quality :IS 1328 certified.
Promise :100% protection against termites and borers.
Adhesive :High quality phenol formaldehyde synthetic resin of BWP grade is used for bonding.
End uses :Decorative plywood with ornamental veneers enhances aesthetic appeal of furniture, wall partitions, penal inert if panel door, false ceiling etc.
Sizes (mts.) :2.44x1.22, 2.44x0.92, 2.14x1.22, 2.14x0.92, 1.84x1.22, 1.84x0.92
Thickness (mm) :4, 6, 9, 12, 19
Adhesive :Phenol formaldehyde synthetic resin - BWR Grade
End uses :All types of furniture, wall partitions, penal insert of panel door, false ceiling etc.
TECHNICAL SPECIFICATIONS | ||
---|---|---|
Grade | BWR grade | |
Type | 1 (one) | |
Moisture content | 8 - 12% | |
Tolerance | Dimension | Tolerance |
Length | +6 mm | |
-0 mm | ||
Width | +3 mm | |
-0 mm | ||
Thickness | Less than 6 mm | +/-10% |
Above 6 mm | +/-5% | |
Finish | Uniform thickness |
USP :Made from 100% Burmese Gurjan, each of its veneer layer is treated with 100% Boric Borax solution and is glue line poisoned to ensure complete protection from insects.
Quality :IS 710 certified.
Promise :Lifetime guarantee with peace of mind for generations.
Rigor proof :Bonded with very high quality phenol formaldehyde synthetic resin of BWP grade and treated with right chemicals to offer maximum protection against termites.
Sl. No. | Test Prescribed | Prescribed Value | Alishan Crystal Result |
---|---|---|---|
1. | Moisture content (%) | 5% - 15% | 9 % |
2. | Glue adhesion strength (in dry state) | Min. individual - 1100 N Average - 1350 N | 1420 1490 N |
3. | Adhesion of ply (knife test) | Minimum pass standard | Minimum pass standard |
4. | Resistance to water (after 72 hrs. boiling) | Minimum - 800 N Average - 1000 N |
1100 N 1200 N |
5. | Tensile strength N/mm 2 Along the grains Across the grains Sum of strength |
42 N 25 N 84.5 N |
57.3 N 55.8 N 113.1 N |
6. | Modulus of elasticity N/mm 2 Along the grains Across the grains |
7500 N 6700 N |
8836 N 8602 N |
7. | Modulus of rupture N/mm 2 Along the grains Across the grains |
Minimum - 45 N Average - 50 N Minimum - 27 N Average - 30 N |
48.0 N 55.6 N 46.8 N 54.0 N |
8. | Retention of preservative Chemicals (kg/m81-ccb type) |
Minimum - 12 Kg | 13.1 Kg |
USP :Alishan Flexiply is a strong and durable plywood made exclusively from Gurjan wood that can be used in bent or curved structures.
Promise :100% protection against termites and wood borers.
Adhesive :High quality phenol formaldehyde synthetic resin of BWP grade is used for bonding.
End uses :Most suitable for use in curved furniture at home / office.
Sizes (mts.) :2.44x1.22, 1.84x1.22
Thickness (mm) :3, 5, 7, 12
End uses :Suitable in bent / curved furniture for homes and offices