Aliner Automotive is one of the leaders in hydraulic washing hoist. Our lifts can be used for washing and lubrication of all types of passenger & commercial vehicles.High grade steel plungers manufactured to close tolerance with chrome plating for high wear resistant.Gland rings used in the plungers to increase performance. Wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering

Current : 3000 VA

Dent Lifter

Hand Puller

Shide Hamemer

Power Lifter

Extra Long Cross Bar

Washe Overtwisted

Washer Over Straight

Magnitic holder

Grinder Mini

Workstation

Trolley

Brand: Wielander+schill Germany

MAIN FEATURESIts base plate design demands less storey height.Manual mechanical lock release system.The 24V ABS control box and limit switch consider your safety operation.Aluminum motor prevents overheating caused by long time working.Feet-protection bar and door-opening protection rubber pad effectively avoid unexpected injuries and damages.With height adapters for servicing light-duty trucks.Reserved hand pump joint on hydraulic block by emergency lowering.Over loading can be perfectly avoided due to the pre-fixed hydraulic pressure.It has been proofed by dynamic test with 115% of rated capacity and static test with 150% of rated capacity.CE certificated.

Equipped with FND display & fully programmable operation.
Universal single adaptor.
Measurement test.
Leak test.
Solonoid cleaning.
Shower cleaning.
Electronic tank level indicator with buzzer sound.

Fully programmable operations.
Universal manifold design for all type of mpfi injectors.
Pulse flow test, RPM test, Solonoid Cleaning, Shower Cleaning, Leak test in automatic mode as well as manual mode.
Programmable injector pulse mode : The operator can check the injector pulse width and frequency at will with in the rpm from 500 to 9900 rpm steps and ms, From 1.5 to 17ms In 0.1ms steps to see.
Measurement Test: Is for to see the spray pattern and measure the discharge chemical of each injector before or after cleaning.
Easy & quick installation of injector.
Chemical is recycled for long time.

Special Features:
First time in India with L.C.D. Display (Alpha-Numeric).
Machine can be operated by external battery in case of power failure on battery mode.
Universal adaptor for all types of injectors.
Micro switch are used for front panel.
Electronic tank level indicator with buzzer sound warming for empty tank.
No external air compressor required.
Totalizer: After cleaning the set of injector in automatic mode the counter will count from 001 to 999.
No attendant required to be present while the injectors are being cleaned.
Battery test mode: To check the car battery voltage (either battery is discharge of charged)

Fully auto system, no any manual valve, recovery/vacuum/recharging phase operating separately or all in one pressReliable design, automatic warning and error system code.Programming recovery/vacuum/recharging parameter and memorizing.250 standard car database embedded.Optional recharging compensationSelf service for help information. Example: non-condensable gases release.Pressure direct adjustment functionAuto zero balance of electronic load cell.Manual function control for self-diagnosing.

ALINER Compressor is manufactured by leader in high quality, quiet running air compressors. And being the manufacturer, we have the technical expertise to guide you in your choice of air system, so your result are reliable, your work dependable. ALINER compressor are used and recommended by many companies that demand only the best. Each system is extensively tested to ensure long lasting, trouble free operation.

Brass: Suction Chamber, Delivery Chamber, Valve Box, Pressure Chamber, Control Valve.Stainless Steel Grand-304: Piston.Aluminum Alloy: Crank Case, Back Frame.Alloy Steel (EN-19): Crank & Connecting Rod.

The simplified air-operated two-chamber or three chamber, brakebleeding device is suitable for bleeding the hydraulic brakes and clutches of all Bleeding can be carried out in a few minutes by just one person. The brake bleeding device is equipped with an elastic inner membrane which hermetically separates the oil from the air, thus avoiding the risk of emulsion. It is also suitable for systems with braking control and ABS (max. at 1 bar).

Air operated suction drainers. Ideal for quick engine oil change of any motor vehicle. Waste oil can be collected by gravity, using the bowl mounted on the adjustable support, or by suction through the supplied probes. After depressurization the drainer works independently without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 C.

Mobile oil dispenser unit. The ideal combination for dispensing oil in any workplace. The very easy to handle trolley is equipped with a drum (180 - 220 kg) clamping device, adjustable side support for stowing accessories, wheel with brake. The unit comes with a handy hose reel with 10 m of hose, and digital hose end meter.

LCD or CRT display screen
Operation Menu in multi- languages (English, French, Germany and Italian)
Automatic tire diameter and distance measuring
Self-calibration and self-diagnosis system
Many balancing ways for different wheel structures
Many optional positioning ways
Placement Accuracy (1 gram 10 gram)
With Imbalance Optimization(OPT)
Measurement units conversion Button (gram-ounce)

High-precision bearings adopted in the main shaft system, made strictly with heat treatment technics; Caremilling on the positioning surface ensures a high precision in thesecond mount/demount operation.
Many balancing ways to suit different wheel structures.
Many optional wheel-positioning ways.
Self-calibrating program to ensure a long service life.
Measurement units conversion Function (gram-ounce).
Display of trouble diagnosis to make maintenance more convenient.
Protective Hood (Optional).

Aliner Automotive is one of the leaders in hydraulic washing hoist. Our lifts can be used for washing and lubrication of all types of passenger & commercial vehicles.High grade steel plungers manufactured to close tolerance with chrome plating for high wear resistant.Gland rings used in the plungers to increase performance. Wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering

Current : 3000 VA

Dent Lifter

Hand Puller

Shide Hamemer

Power Lifter

Extra Long Cross Bar

Washe Overtwisted

Washer Over Straight

Magnitic holder

Grinder Mini

Workstation

Trolley

Brand: Wielander+schill Germany

MAIN FEATURESIts base plate design demands less storey height.Manual mechanical lock release system.The 24V ABS control box and limit switch consider your safety operation.Aluminum motor prevents overheating caused by long time working.Feet-protection bar and door-opening protection rubber pad effectively avoid unexpected injuries and damages.With height adapters for servicing light-duty trucks.Reserved hand pump joint on hydraulic block by emergency lowering.Over loading can be perfectly avoided due to the pre-fixed hydraulic pressure.It has been proofed by dynamic test with 115% of rated capacity and static test with 150% of rated capacity.CE certificated.

Equipped with FND display & fully programmable operation.
Universal single adaptor.
Measurement test.
Leak test.
Solonoid cleaning.
Shower cleaning.
Electronic tank level indicator with buzzer sound.

Fully programmable operations.
Universal manifold design for all type of mpfi injectors.
Pulse flow test, RPM test, Solonoid Cleaning, Shower Cleaning, Leak test in automatic mode as well as manual mode.
Programmable injector pulse mode : The operator can check the injector pulse width and frequency at will with in the rpm from 500 to 9900 rpm steps and ms, From 1.5 to 17ms In 0.1ms steps to see.
Measurement Test: Is for to see the spray pattern and measure the discharge chemical of each injector before or after cleaning.
Easy & quick installation of injector.
Chemical is recycled for long time.

Special Features:
First time in India with L.C.D. Display (Alpha-Numeric).
Machine can be operated by external battery in case of power failure on battery mode.
Universal adaptor for all types of injectors.
Micro switch are used for front panel.
Electronic tank level indicator with buzzer sound warming for empty tank.
No external air compressor required.
Totalizer: After cleaning the set of injector in automatic mode the counter will count from 001 to 999.
No attendant required to be present while the injectors are being cleaned.
Battery test mode: To check the car battery voltage (either battery is discharge of charged)

Fully auto system, no any manual valve, recovery/vacuum/recharging phase operating separately or all in one pressReliable design, automatic warning and error system code.Programming recovery/vacuum/recharging parameter and memorizing.250 standard car database embedded.Optional recharging compensationSelf service for help information. Example: non-condensable gases release.Pressure direct adjustment functionAuto zero balance of electronic load cell.Manual function control for self-diagnosing.

ALINER Compressor is manufactured by leader in high quality, quiet running air compressors. And being the manufacturer, we have the technical expertise to guide you in your choice of air system, so your result are reliable, your work dependable. ALINER compressor are used and recommended by many companies that demand only the best. Each system is extensively tested to ensure long lasting, trouble free operation.

Brass: Suction Chamber, Delivery Chamber, Valve Box, Pressure Chamber, Control Valve.Stainless Steel Grand-304: Piston.Aluminum Alloy: Crank Case, Back Frame.Alloy Steel (EN-19): Crank & Connecting Rod.

The simplified air-operated two-chamber or three chamber, brakebleeding device is suitable for bleeding the hydraulic brakes and clutches of all Bleeding can be carried out in a few minutes by just one person. The brake bleeding device is equipped with an elastic inner membrane which hermetically separates the oil from the air, thus avoiding the risk of emulsion. It is also suitable for systems with braking control and ABS (max. at 1 bar).

Air operated suction drainers. Ideal for quick engine oil change of any motor vehicle. Waste oil can be collected by gravity, using the bowl mounted on the adjustable support, or by suction through the supplied probes. After depressurization the drainer works independently without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 C.

Mobile oil dispenser unit. The ideal combination for dispensing oil in any workplace. The very easy to handle trolley is equipped with a drum (180 - 220 kg) clamping device, adjustable side support for stowing accessories, wheel with brake. The unit comes with a handy hose reel with 10 m of hose, and digital hose end meter.

LCD or CRT display screen
Operation Menu in multi- languages (English, French, Germany and Italian)
Automatic tire diameter and distance measuring
Self-calibration and self-diagnosis system
Many balancing ways for different wheel structures
Many optional positioning ways
Placement Accuracy (1 gram 10 gram)
With Imbalance Optimization(OPT)
Measurement units conversion Button (gram-ounce)

High-precision bearings adopted in the main shaft system, made strictly with heat treatment technics; Caremilling on the positioning surface ensures a high precision in thesecond mount/demount operation.
Many balancing ways to suit different wheel structures.
Many optional wheel-positioning ways.
Self-calibrating program to ensure a long service life.
Measurement units conversion Function (gram-ounce).
Display of trouble diagnosis to make maintenance more convenient.
Protective Hood (Optional).