Ahmedabad, Gujarat, India
Our Products
Alfa Icas tough gloss laminates are the super stylish range of gloss laminates which are scuff resistant and are in high demand for spaces like shops, offices and homes.
| Sr No | Properties | Unit | Requirement as per EN438:2005 | Alfaica Conforms |
|---|---|---|---|---|
| 1 | Thickness | 1 mm | (± 0.10 mm) | √ |
| 2 | Length / Width | 2440 x 1220 mm 3050 x 1300 mm |
(± 10, - 0 mm) (± 10, - 0 mm) |
√ √ |
| 3 | Appearance | - | Should be free from foreign particles | YES |
| 4 | Density | gm/cm³ | 1.41 | 1.45 |
| 5 | Dimensional stability | % Max – “L” % Max – “T” |
0.55 (max) 1.05 (max) |
√ √ |
| 6 | Resistance to surface wear | Cycles (min) | 350 | 800 |
| 7 | Resistance to dry heat @ 180℃ | Grade | 4 | >4 |
| 8 | Boiling water Resistance | Mass Increase % (max) Thickness Increase % (max) |
10 11.8 |
8 9 |
| 9 | Resistance to Steam | Grade | 4 | >4 |
| 10 | Resistance to Cigarette Burn | Grade | 3 | >3 |
| 11 | Resistance to Ball impact | NEMA LD3 (3.9) (mm) | 900 | 1000 |
Compact Grade Laminates (HPL) is composed of several layer of Kraft paper and faces. It can be used for substrate and for horizontal and vertical grade applications.
| Sr No | Properties | Unit | Requirement as per EN438:2005 | Alfaica Conforms |
|---|---|---|---|---|
| 1 | Length / Width | 2440 x 1220 mm 3050 x 1300 mm |
(± 10, - 0 mm) (± 10, - 0 mm) |
(± 10, - 0 mm) (± 10, - 0 mm) |
| 2 | Appearance | - | Should be free from foreign particles | YES |
| 3 | Density | gm/cm³ | > 1.35 | 1.4 |
| 4 | Dimensional stability | % Max – “L” % Max – “T” |
0.3 0.6 |
√ √ |
| 5 | Wear Resistance | Cycles(min) | 350 | 400 |
| 6 | Resistance to dry heat @ 180℃ | Grade | 3 | ≥3 |
| 7 | Boiling water Resistance | Mass Increase % (max) Thickness Increase % (max) |
<2 <2 |
1 1 |
| 8 | Resistance to water Vapour | Appearance | 4 | ≥4 |
| 9 | Resistance to Cigarette Burn | Grade | 3 | ≥3 |
| 10 | Resistance to impact By large diameter Ball | Drop Height (mm) Indent Diameter (mm) |
800 10 |
> 1000 No Dent |
| 11 | Resistance to Crazing @ 80℃ in Oven | Appearance | 4 | ≥4 |
| 12 | Resistance to Staining | Appearance Group 1 & 2 Group 3 |
5 4 |
5 >4 |
Post formable HPL is a plastic base resin mix HPL which softens at high temperature and is HOT FORMABLE. Very easy formatibility on any machine upto 9 mm. With good expertise, Alfa Ica PF Laminate forms upto 3 mm. R.
| Sr No | Properties | Unit | Requirement as per EN438:2005 | Alfaica Conforms |
|---|---|---|---|---|
| 1 | Thickness | 0.7 mm | (± 0.10 mm) | √ |
| 2 | Length / Width | 2440 x 1220 mm 3050 x 1300 mm |
(± 10, - 0 mm) (± 10, - 0 mm) |
√ √ |
| 3 | Appearance | - | Should be free from foreign particles | YES |
| 4 | Density | gm/cm³ | 1 | 1 |
| 5 | Dimensional stability | % Max – “L” % Max – “T” |
0.55 (max) 1.05 (max) |
√ √ |
| 6 | Surface Wear Resistance | Cycles (min) | LD - 2.01 | Min 4600 Cycles |
| 7 | Resistance to dry heat @ 180℃ | Grade | 4 | >4 |
| 8 | Boiling water Resistance | Mass Increase % (max) Thickness Increase % (max) |
10 11.8 |
8 9 |
| 9 | Resistance to Steam | Grade | 4 | >4 |
| 10 | Resistance to Cigarette Burn | Grade | 3 | >3 |
| 11 | Impact Strength | NEMA LD3 (3.9) (mm) | 900 | 1000 |
