Akshar Enterprise

Rajkot, Gujarat

Application Areas:

• White cement based finishing / smothering material for indoor and outdoor plastered surface Renders a smooth and durable surface and acts as an under layer for all kind of decorative paints.

Features:

• Good adhesion to Substrate, does not stick to the palm when rubbed.
• Excellent for water proofing capability. 
• Easy to clean. 
• Prevents flaking of paints. 
• Excellent white colour. 
• Can be stained with a good quality water based stainer for light slades. 
• Excellent coverage.
• Extra White with Perfect Finish

Coverage :

• One bag of 20 Kg. covers approx 110-125 sqft in 2 coats for maximum on the surface level.

Application :

• Lay out the wall where Super Ajanta Blockfix''s is to be used and mark opening like door, windows.
• Apply a thin uniform layer of Super Ajanta
•  Blockfix''s 3-4 mm thick on the clean and level surface of masonry unit using proper trowel.
• Place the next course Of masonry units on the evenly laid jointing mortar bed in proper line and level.
• Each masonry unit shall be properly bedded and set in position by gently pressing with the handle of trowel After placing the first units apply Super Ajanta Blockfix''s of same thickness on both the side of the unit. Check for lines & levels.
• Inside face of the masonry unit shall be buttered with mortar before the next unit is laid and pressed against is especially in case of bricks.
• Clean the excess material, if any immediately continue the procedure tor the entire masonry work.

Advantages :

• Thinner jointing material with very high adhesive strength improve overall masonry strength and load bearing capacity Pre-mixed and ready to use. Only water is to be added at Site.
• East to mix much faster to apply due to its superior flowability and water retention properties.
• No water curing is required after application.
• East to mix much faster to apply due to its superior flow ability and water retention properties.
• Thinner layer of application tor lesser Shrinkage and seamless structure.
• Economical quality of mortar is far less than conventional mortar
• Seepage/water percolation through joints is negligible due to integrity 0t mortar joints with masonry units.
• Ready to subsequent application like plastering just after 24Hrs. of application Raking of joints is not required before plastering.
• Raw materials are process reducing the chances Of efflorescence.
• Super Ajanta Blockfix''s is made from eco friendly material.

Uses :

• Versatile thin jointing material for laying AAC Blocks, concrete Blocks, Fly ash bricks, etc.
• This Mortar is specialty designed to provide stronger,
• much more durable bonding between the blocks and
• superior adhesive strength. It replaces conventional
• cement and sends mix mortar. Laying and Jointing of
• masonry units like fly ash bricks, concrete blocks.
• hollow blocks, AAC blocks, etc.

Application:Surface Preparation: The object of the surface preparation is to achieve a clean sound surface with a good mechanical key. All substrates should be cleaned and free of dust, plaster, oil, paint, grease, corrosion deposits, and any Other deleterious substances. Latence should be removed by mechanical means. Smooth substrates must be mechanically roughened e.g. by scabbing, needle gun or grit blasting to provide an adequate key. Corroded reinforcing steel should be exposed around its full circumference.

Advantages:Simple to use - Single component, gauged as required.High adhesion-provides excellent bond to concrete, adhesion plaster, masonry. Stone work, etc.Improves durability - Gives weather resistant mortar with improved impermeability to chlorides and Other harmful agents.Reduces permeability-Provides waterproof screeds, plasters and permeability slurries.Increases strength - Improved tensile and flexural properties allow thin applications.Versatile-Compatible with all common hydraulic cements.

Uses:For modifying and improving bonding Of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonary and slurries.

Plaster is a construction material that coats and protects the inside walls and ceilings. It is also used to decorate the walls as it can be formed into crown cornices, ceiling roses, corbels and other architectural mouldings. Plaster comes in a powdered form.

Extra Power Grout is stain free, Colour fast chemical Resistance 100% Solid epoxy Groue for ceramic tile, vitrified tiles, marble and stone.

APPLICATION:

• Extra powder Grout is ideally suited for residential and commercial insallation were materials must reist physical abuse Shock and chemical attack.

Caution:

• This Production can be irritating to eye and skin. Avoid prolonged contact with eye and skin. Incase of direct contact with Eyes, Wash your Eye immediately with water and seek medical attention quickly. Do not swallow.

Safety:

• Keep out of reach of children

Application Areas:

• Exterior and Interior wall of houses, offices, giant plazas, bungalows, outhouses and farmhouses.
• Indoor & Outdoor Stadiums.
• Trade and technology parks.
• Educational Institutions.
• Aesthetic and fine decorative buildings.
• Convention centers.
• Airport and railway stations.
• Operas and theaters.
• Museums and exhibition halls.
• Anywhere there's a wall.

Application Areas:

• Exterior and Interior wall of houses, offices, giant plazas, bungalows, outhouses and farmhouses.
• Indoor & Outdoor Stadiums.
• Trade and technology parks.
• Educational Institutions.
• Aesthetic and fine decorative buildings.
• Convention centers.
• Airport and railway stations.
• Operas and theaters.
• Museums and exhibition halls.
• Anywhere there's a wall.

A glass suction cup is a rubber cup designed to grip flat sheets of material, most often glass, stone and steel, to lift and move them safely. They are made from rubber because this allows them to form a perfect seal on a variety of different materials. Made from a single aluminium alloy mould, our suction cups come with pads made of natural rubber, a non-slip grip and a quick lock and release lever.

The base concrete should be laid and compacted in accordance with good concrete practice. Accurate finished profile and minimum laitance bulid-up should be ensured. Particular attention should be paid to bay edges and corners to ensure full compaction. Super Ajanta Hardners special is appiled for differnt types of  industrial use
Uses:Super Ajanta Hardners special provide a highly abrasion resistant surface to  concrete floors by the dry shake-on method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to the heaiest traffic, e.g. loding bays, trucking lanes, car parks, workshops, machine shop, ramps and spillways.
ADVANTAGES: 

• Non metallic-does not rust or stain.
• Provides a hard, abrasion resistant surface.
• Forms monolithic bond with base concrete.
• Easy and economical to apply.

curing:
Tests have shown that proper curing of concrete floors treated with products such as SUPER AJANTA special is essential to ensure the physical properties of the floor.The most efficient method of curing by using SUPER AJANTA HARDNERS curing membrane which  conforms to ASTM & DOE specifications However, in indoor applictions where curing conditions are less arduous and breakdown of the membrane slower, alternative approved methods of curing such as polythene sheeting or water pending are acceptable

Application Areas:

• White cement based finishing / smothering material for indoor and outdoor plastered surface Renders a smooth and durable surface and acts as an under layer for all kind of decorative paints.

Features:

• Good adhesion to Substrate, does not stick to the palm when rubbed.
• Excellent for water proofing capability. 
• Easy to clean. 
• Prevents flaking of paints. 
• Excellent white colour. 
• Can be stained with a good quality water based stainer for light slades. 
• Excellent coverage.
• Extra White with Perfect Finish

Coverage :

• One bag of 20 Kg. covers approx 110-125 sqft in 2 coats for maximum on the surface level.