Our Products
Wall Mounts
2 Products availableLubricants
2 Products availableWe offer the best product range of Classical V Belts, Hexagonal Belts, Narrow V Belts, V Section Belts and Industrial V Belts.
Classical V-belts are endless belts used for a wide range of applications providing a technically and economically good design for most ordinary drives. They are antistatic, oil and heat resistant and can be used in an application where belt linear speed does not exceed 30 meters/sec.
Features:
Applications:
| Section Code | Top Width (mm) | Height (mm) | Length Range (mm) |
| Z/FHP | 10 | 6 | 380-1220 |
| A | 13 | 8 | 480-5200 |
| B | 17 | 11 | 560-11200 |
| C | 22 | 14 | 900-11200 |
| D | 32 | 19 | 1900-13700 |
| E | 38 | 23 | 3000-13700 |
HI-TECH Hexagonal Belts are specially designed for convoluted and serpentine belt drive paths with reverse bends. The sudden direction changes in belt travel put unique stresses and demands on the belt carcass and structure and such loads are reliably handled by these anti-static and oil-resistant belts.
HI-TECH Hexagonal Belts have been designed with a new cross-section that keeps the belt perfectly aligned, both laterally and longitudinally, in the pulley groove. These hexagonal v belts use a high quality Polyester tensile member as its core and chlcroprene is used in insulation rubber and is impregnated in the specially woven covering cloth.
| Section Code | Top Width (mm) | Height (mm) | Length Range (mm) |
| BB | 17 | 13 | 1750-3050 |
HI-TECH Narrow V Belts are especially suitable for drives with high belt speeds and are used in industrial and agricultural machinery. Since they need upto 50% smaller pulley widths than classical sections, this allows for a substantial size reduction in drives. Since most new drives these days use universal pulleys, the industrial v belts can in most cases be replaced with a narrow v belts, thereby achieving better power transmission efficiency that eventually results in a longer belt life.
| Section Code | Top Width (mm) | Height (mm) | Length Range (mm) |
| SPZ/3V | 10 | 8 | 630-3000 |
| SPA | 13 | 10 | 800-4500 |
| SPB/5V | 17 | 14 | 1250-8000 |
| SPC | 22 | 18 | 2000-12500 |
8V section belts are manufactured by experienced team members of our organization in accordance with international industrial standards. Manufactured from anti-static wear resistant cover fabric to ensure proper flexibility and balanced elasticity. We put best available techniques to design these belts which make these perfect to provide effective performance in adverse working conditions also. These can be availed in various thickness and specifications following the precise requirements of clients.
The industrial V belts offered by us are designed and developed by our expert team members using best available techniques to ensure finest quality and longer life of these products. Owing to their V shaped cross-section, these belts are acknowledged as V belts. These are designed with different sides which increase the grip, to help cool the belt and relieve stress as the belt bends around small diameter of the pulleys. These belts are extensively acknowledged for its high strength and high rigidity.
Ghaziabad, Uttar Pradesh, India 