Akash Industries Kolhapur, Maharashtra

Supplied with shear test attachment along with a 180^o bend test attachment, this Mechanical Universal Testing Machine is simpler to install as compared to its contemporaries. We are a credible Manufacturer, Supplier and Exporter of Mechanical Universal Testing Machine. Also, this Mechanical Universal Testing Machine is simple to operate.

This Fatigue Testing Machine is known for carrying out Fatigue Tests on materials by putting it under exponential stress, tension and compression. We are an acclaimed Manufacturer, Supplier and Exporter of Fatigue Testing Machine. This Fatigue Testing Machine is manufactured in confirmation to the set industrial standards. Application :

• Used to test the fatigue strength of materials and to draw S-N diagram by Research Institution Laboratories, Material manufacturers, and various industries
• Models : AI-FTM8

Accuracy & Calibration : This machine conforms to requirement of IS : 5075 - 1969 Standards Highlights :

• Light weight
• Compact size
• Simple design
• An interlocking system provided puts off the motor at specimen failur
• Table model, no need of foundation
• Calibration is in Nm
• Simple lever system of changing load

This Torsion Testing Machine is designed for carrying out twist and torsion on different types of tubes, metals, wires and sheet material. The torque measurement in this type of Torsion Testing Machine is done with the help of pendulum dynamometer system. Also, the torque range of this Torsion Testing Machine can be adjusted with the help of auto torque selector. The torque, which is applied to the specimen by this Torsion Testing Machine, is done by geared motor via a gear box. Further, the autographic recorder gives relation between angel of twist and torque; the torque accuracy indication is done through a +. Machines up to 25000 Nm. Capacity will be available on special enquiry FIE reserves the rights of change in above specification due to constant improvements in design.

Fast, hassle-free setting of test specimens is guaranteed by the innovative designing of this Computerized Universal Testing Machine. Confirming to even the most rigorous of industrial standards, this Computerized Universal Testing Machine is easy to operate thanks to its user-friendly interface. We are a trusted Manufacturer, Exporter and Supplier of Computerized Universal Testing Machine. Details :

• Straining at variable speeds to suit a wide range of materials
• Loading accuracy as high as + 1 %
• Motor driven threaded Columns for quick effortless adjustment of middle cross-head to facilitate rapid fixing of test specimen
• Printer supplied as option to study the behavior of the material
• Wide range of standard and special accessories, including load stabilize
• Simplicity in reading because of digital readouts
• Large effective clearance between columns enables testing of standard specimens as well as structures
• Easy change from plain to threaded and screwed specimens
• Simple controls for ease of operation
• Robust straining frame of an extremely rigid construction
• Safe operation ensured by means of safety devices
• Fully enclosed and protected pressure transducer
• Confirms to IS 1828
• Optional serial port to transfer data to computer for analysis / storage evaluation etc.

Applications :

• Testing metals and other materials under tension, compression, bending, transverse and shear loads
• Hardness test on metals can also conducted

Simple to operate and accurate test results are some of the guarantees that are given by this Vickers Hardness Testing Machine. This Vickers Hardness Testing Machine measures hardness of any accurately designed metallic part. The tested specimen (metal) can range from soft to hard. Conforms To : IS : 1754 :2002 & ISO 6507-2 : 1997 Features :

• Tiny indenation allows testing of a precision finished
• Wide testing range, from soft metal such as lead, up to the hardest, like hardened steel
• Same hardness number is obtained on the same specimen, Regardless of the load applied
• Motorized loading and unloading cycle
• Thin Sheet metal is perfectly tested. Because applied load is very small
• Built-in Projection screen to get accurate
• "AI" make Vickers Hardness Tester is simple & accurate in design, It is Suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard & their accurate results are widely acclaimed.These testers strictly coform to IS :1754 :2002 & ISO 6507-2 : 1997

The need to carry out hassle-free Charpy Test and Izod Test is met once this Impact Testing Machine is purchased. We offer the Impact Testing Machine at competitive rates to clients. These Impact Testing Machines are available in diverse specifications and ensure that these tests are performed accurately. The Test Methods Confirm To : BS : 131 : PART 4 - 1972 (Amended 15 Aug - 1993) & BSEN : 10045 - 2 : 1993 Construction : The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen and is read form the maximum pointer on the dial scale. Strikers & Supports : There are two strikers & one combined support available for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing form one striker to another is achieved simply by fixing the new striker into its position. Working : Controls of Pendulum : The Pendulum supported in the starting position is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operated. Optional Accessories :

• Caliper gauge for checking V notch for Izod & Charpy as per BS : 131 :PART1, 2 and 3
• Depth notch gauge including V&U notch, angle & radius
• Preliminary Test force 29.42, 98.07 N 3, 10KgF
• Self centering tong
• V-notch milling cutter
• U-notch milling cutter

How The Tests Are Performed?

• Charpy Test : In this test, the specimen is put on the Alloy Steel Support Anvils that are firmly fixed on base of machine. The anvils are held together by alien screws. Also, the end stopper is provided to accurately and quickly locate the test specimen in a central location between the supports.
• Izod Test : The Izod Test Specimen is clamped in a vertical position on support anvils. These anvils are fitted on base of the machinery. Further, this support is supplied with a machined vertical groove that suits the size of the test specimen. The front clamp piece as well as alien screw enables correct clamping of test piece in an accurate height : such correct clamping is done with the help of Izod setting gauge.

Range

• Impact Testing Machine - Heavy Base - Model - AI - IT - 30
• Impact Testing Machine - Light Base - Model - AI - IT - 30
• Impact Testing Machine - Digital - Model - AI - IT - 30
• Impact Testing Machine - ASTM -With NIST Samples - Model - AI - IT - 30 - ASTM
• Impact Testing Machine - ASTM -Without NIST SamplES - Model - AI - IT - 30 - ASTM

Whether it is testing of hardness of alloys or metals of any kind (soft or hard) and shape (irregular, round or flat), this Rockwell Hardness Testing Machine is suited for testing different types of material. Features such as ease-of-operation and simple design make this Rockwell Hardness Testing Machine a great buy. Best suited for different laboratories, inspection department, tool-rooms, factories, etc., this Rockwell Hardness Testing Machine allows accurate results. Conform To IS : 1586 - 2000, BS : 891 parts 1 & 2, ASTM : E 18 for Rockwell Test, IS : 2281 -1983, BS : 240, ASTM : E10 for Brinell Test & IS " 1586-2000, ASTM : E18 for Rockwell Superficial Test Principle : Rockwell & Rockwell superficial tests consist of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force, and then, measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.