Akanksha Power and Infrastructure Pvt. Ltd.

Ambad, Nashik, Maharashtra

In order to maintain our goodwill among the clients, we are engaged in manufacturing and supplying a quality assured range of LV APFC Panel that are also known as Low Voltage APFC Panel. Our offered panels are perfectly manufactured at by our diligent workforce making use of quality tested raw material and the ultra modern technology. These panels are used in various power stations and are highly appreciated by our clients for their unique features. Further, before the final dispatch from our end, these panels are tested against several parameters under the supervision of our quality controllers.

General Descriptions:

Any non-linear loads like:

• Non power factor corrected fluorescent and HID lighting fixture ballasts (40-80% p.f.)
• Arc welders (50-70% pf)
• Solenoids (20-50% pf)
• Induction heating equipment (60-90% pf)
• Small "dry-pack" transformers (30-95% pf)
• Induction motors (55-90%) etc

Can cause poor power factor. In many areas electricity boards imposes a penalty charge for low power factor (pf). A poor power factor due to an inductive load can be improved by addition of capacitors in shunt. Awareness of necessity of power factor quality is increasing. Enhancing power quality i.e improvement of power factor saves cost and ensures a rapid return on investments.
Installing "APIPL" APFC Panels provides a reliable solution for elimination of penalties and a cost reduction in the electricity bills by approximately 25%. This panel offers designs that are suitable for indoor or outdoor use. They are designed to minimize installation time and cost and offers high reliability, long life and is suitable for operation over a temperature range of - 10 C to 50 C. A wide range of ratings with standard devices are available.

Best Suitable For:

• This APFC panel is best suitable for
• Installations having thyristorised loads
• Municipal water pumping schemes
• Lift irrigation schemes
• DoT, Railways, CPWD requirement
• Upto 20% harmonic distortions
• 50 % over current
• 20 % over voltages

Salient Features:

User friendly Microprocessor based APFC Relay having following characteristics:

• Intelligent control
• Menu driven handling
• Self-optimizing control capability
• Large measuring voltage range
• Recall function of recorded values
• Four-quadrant operation (e.g. stand by generator)
• Powerful alarm output
• Current limiting contactors/Thyristors especially designed for capacitor switching
• Load manager and data logger can also be provided in additional to downloading data
• Provision for top and bottom cable entry
• Aesthetically designed dust proof cabinet with powder coating
• Cooling fan for efficient performance
• Completely wired and tested in works and supplied with all control and safety devices

In order to maintain our goodwill among the clients, we are engaged in manufacturing and supplying a quality assured range of LV APFC Panel that are also known as Low Voltage APFC Panel. Our offered panels are perfectly manufactured at by our diligent workforce making use of quality tested raw material and the ultra modern technology. These panels are used in various power stations and are highly appreciated by our clients for their unique features. Further, before the final dispatch from our end, these panels are tested against several parameters under the supervision of our quality controllers.

General Descriptions:

Any non-linear loads like:

• Non power factor corrected fluorescent and HID lighting fixture ballasts (40-80% p.f.)
• Arc welders (50-70% pf)
• Solenoids (20-50% pf)
• Induction heating equipment (60-90% pf)
• Small "dry-pack" transformers (30-95% pf)
• Induction motors (55-90%) etc

Can cause poor power factor. In many areas electricity boards imposes a penalty charge for low power factor (pf). A poor power factor due to an inductive load can be improved by addition of capacitors in shunt. Awareness of necessity of power factor quality is increasing. Enhancing power quality i.e improvement of power factor saves cost and ensures a rapid return on investments.
Installing "APIPL" APFC Panels provides a reliable solution for elimination of penalties and a cost reduction in the electricity bills by approximately 25%. This panel offers designs that are suitable for indoor or outdoor use. They are designed to minimize installation time and cost and offers high reliability, long life and is suitable for operation over a temperature range of - 10 C to 50 C. A wide range of ratings with standard devices are available.

Best Suitable For:

• This APFC panel is best suitable for
• Installations having thyristorised loads
• Municipal water pumping schemes
• Lift irrigation schemes
• DoT, Railways, CPWD requirement
• Upto 20% harmonic distortions
• 50 % over current
• 20 % over voltages

Salient Features:

User friendly Microprocessor based APFC Relay having following characteristics:

• Intelligent control
• Menu driven handling
• Self-optimizing control capability
• Large measuring voltage range
• Recall function of recorded values
• Four-quadrant operation (e.g. stand by generator)
• Powerful alarm output
• Current limiting contactors/Thyristors especially designed for capacitor switching
• Load manager and data logger can also be provided in additional to downloading data
• Provision for top and bottom cable entry
• Aesthetically designed dust proof cabinet with powder coating
• Cooling fan for efficient performance
• Completely wired and tested in works and supplied with all control and safety devices

We are the leading manufacturer and supplier of Automatic Power Factor Controller. Our skilled professionals manufactured this controller at our premises with the use of high end technology and exquisite quality of components that are procured from the trusted vendors of the market. A team of our quality controllers strictly check its quality against varied parameters with the strong intention of delivering a best product to our clients. In addition to this, our offered controller can be availed by our esteemed clients in various technical specifications.
The power factor controller CR 2020 calculates the actual and reactive power in the mains from the measured current and voltage. It also determines if actual power is being consumed or delivered.
The controller identifies the power of the connected capacitor stages and connects or disconnects them in an optimized manner as required by the actual mains conditions. The regulation considers the frequency of changes in the reactive load and follows the principle of rotational switching. This guarantees that optimum power factor correction is achieved with the minimum number of switching operations.
It is also possible to determine a fixed capacitor value which is always added to the measured capacitor power. This is useful for the additional compensation of the reactive power of a transformer.
The integrated digital display can show the actual power factor, the mains frequency, the actual tariff, the programmed target power factor, the value of present harmonics, the connected and the missing capacitor power. This makes general and specific monitoring of the capacitor bank and its operating conditions possible. The power factor controller CR2020 is ready for operation with its preset functions immediately after installation without any modifications or adjustments. Available with 10 outputs.
Features:
Shock resistanceEasy to operateNo risk