Akanksha Power and Infrastructure Pvt. Ltd.

Ambad, Nashik, Maharashtra

We are established in the industry for manufacturing and supplying an extensive range of Variable Frequency Drive. The provided drive is manufactured from the latest technology and best quality components by our deft professionals. Our offered drive is used in electro-mechanical drive systems to limit motor speed by changing voltage and frequency. Apart from this, the offered drive is strictly checked by our quality analysts on numerous quality parameters before dispatching to the users end.

Features:

• Has high operational performance
• Precisely engineered
• Optimum functionality

Potential Transformer

Our Potential Transformers are designed to present negligible load to the supply being measured and have an accurate voltage ratio and phase relationship to enable accurate secondary connected metering, with following technical deatails:

A- Indoor PT with Epoxy insulation up to 33KV

• Burden and accuracy class as per IS Standard.
• V F can range upto 1.9 for 8 Hrs.
• Single pole, Double pole or 3 phase PT

B-Oil cooled PT up to 33KV

• Burden and accuracy as per IS standard
• V F can range upto 1.9 for 8 Hrs.
• Single or 3 phase

Current Transformer

Current transformer are designed to scale down replica of the current in the MV lines and isolate the measuring instruments meters , relays etc, from the power circuit .We provide :

A- Indoor CT with Epoxy insulation up to 33KV

• Burden and accuracy class as per IS Standard.
• Is=5 or 1A
• Ith Upto 50KA

B-Oil cooled CT up to 33KV

• Burden and accuracy class as per IS Standard.
• Is =5 or 1 A.
• Ith Upto 50KA

We provide the metering cubicle for accurate metering of energy & wide spread activities.The metering cubicles are installed electrically in between the incoming supply point and the step down transformer of consumers installation., with following technical deatails:

• Up to 33KV
• Indoor or Out door
  • Pilfer resistance Design
  • Outdoor type Metering cubicle is weather and Dust proof
  • High effort quality Resin cast instrument transformers of our won make used inside.
  • No exposure of live parts
  • Available of 3Ph-3 wires/3Ph-4 wires measuring systems.
  • Electronic Lock arrangement(On request)

Features Of Metering Cubicle

We offer Metering cubical as per customers requirement. The cubical are divided into two parts upper one for energy meter and lower one for current and voltage transformer. The cubical are dust proof and pilfer resistant. The cubical are available in three phase three wire or three phase four wire systems.

Backed by a team of our knowledgeable professionals, we are dedicated towards manufacturing and supplying Power Quality Monitoring System. These are well manufactured by our knowledgeable professionals with the use of superior quality of components and high end technology in accordance with the industry set standards. Our offered device is widely acclaimed among our precious clients due to its proper functionality. Moreover, it can be availed at cost-effective prices from us.

Features:

• Easy installation
• User friendly design
• Shock proof

We feel proud being a leading manufacturer and supplier of Electrical MCC Panel that are known as Motor Control Center Panels. The offered products are precisely manufactured at our premises making use of high grade components and the modernized technology in compliance with the set industry guidelines. These products are highly acclaimed among our valued clients due to its durability. Apart from this, our quality controllers rigorously check these products on several parameters before the final dispatch.

Used:

• Motor control panels, suit to customer's application. We offer both in fixed and draw out constructions
• The panels are engineered with premium quality material and components with latest technology

Features:

• Easy to install
• Shock proof
• High functionality

Backed by a team of skilled professionals, we are offering a comprehensive range LT Distribution Panel. The offered panel is widely used in the power station for distributing electricity. The panel we provide is precisely fabricated by our experienced professionals making use of high grade components and sophisticated technology in conformity with the defined industry norms. Additionally, this panel is suitable to be used in residential as well as industrial areas.

Used:

• Used for utilities, Industries and other electrical Installations. The panels are engineered with premium quality material and components with latest technology

Features:

• High functionality
• Trouble free performance
• Shock proof

Manufacturer / Exporters / Wholesale Suppliers Of Current Transformer, Potential Transformer

• Business Type Manufacturer / Exporters / Wholesale Suppliers
• Year of Estd 2006

• Company Turnover Rs. 10 to 12 Crore Approx.
• No. of Employee Below 20

In order to maintain our goodwill among the clients, we are engaged in manufacturing and supplying a quality assured range of LV APFC Panel that are also known as Low Voltage APFC Panel. Our offered panels are perfectly manufactured at by our diligent workforce making use of quality tested raw material and the ultra modern technology. These panels are used in various power stations and are highly appreciated by our clients for their unique features. Further, before the final dispatch from our end, these panels are tested against several parameters under the supervision of our quality controllers.

General Descriptions:

Any non-linear loads like:

• Non power factor corrected fluorescent and HID lighting fixture ballasts (40-80% p.f.)
• Arc welders (50-70% pf)
• Solenoids (20-50% pf)
• Induction heating equipment (60-90% pf)
• Small "dry-pack" transformers (30-95% pf)
• Induction motors (55-90%) etc

Can cause poor power factor. In many areas electricity boards imposes a penalty charge for low power factor (pf). A poor power factor due to an inductive load can be improved by addition of capacitors in shunt. Awareness of necessity of power factor quality is increasing. Enhancing power quality i.e improvement of power factor saves cost and ensures a rapid return on investments.
Installing "APIPL" APFC Panels provides a reliable solution for elimination of penalties and a cost reduction in the electricity bills by approximately 25%. This panel offers designs that are suitable for indoor or outdoor use. They are designed to minimize installation time and cost and offers high reliability, long life and is suitable for operation over a temperature range of - 10 C to 50 C. A wide range of ratings with standard devices are available.

Best Suitable For:

• This APFC panel is best suitable for
• Installations having thyristorised loads
• Municipal water pumping schemes
• Lift irrigation schemes
• DoT, Railways, CPWD requirement
• Upto 20% harmonic distortions
• 50 % over current
• 20 % over voltages

Salient Features:

User friendly Microprocessor based APFC Relay having following characteristics:

• Intelligent control
• Menu driven handling
• Self-optimizing control capability
• Large measuring voltage range
• Recall function of recorded values
• Four-quadrant operation (e.g. stand by generator)
• Powerful alarm output
• Current limiting contactors/Thyristors especially designed for capacitor switching
• Load manager and data logger can also be provided in additional to downloading data
• Provision for top and bottom cable entry
• Aesthetically designed dust proof cabinet with powder coating
• Cooling fan for efficient performance
• Completely wired and tested in works and supplied with all control and safety devices

We are one step ahead from our competitors in manufacturing and supplying Medium Voltage Capacitor. The offered capacitors are precisely manufactured by our skilled engineers using high quality of raw material and advanced manufacturing techniques. These can be used in various industries for different purposes. Our quality auditors rigorously check these capacitors on varied parameters before the final dispatch. Additionally, these can be availed by our reputed clients in various specifications from us as per their needs.
Worlds first liquid-free MV capacitor, with self-healing dielectric. And the matching reactors. And even our surge suppression capacitors are dry! This makes things different.

• The eco-friendly alternative
• No liquids
• Self-healing dielectric and long-term stable capacitance
• No phase asymmetries

The traditional All Film system of conventional medium and high voltage capacitors consists of aluminium foil and polypropylene, immersed completely in synthetic, flammable oil. Breakdowns in this kind of dielectric tend to result in permanent short circuits which take out the entire capacitor element, change the voltage conditions inside the capacitor and initiate a chain reaction of further failures of capacitor elements which will end up in the loss of the entire capacitor. In three-phase capacitors, this process is usually accompanied by the occurrence of phase asymmetries which may cause damage and catastrophic failure.
In our MSD medium voltage capacitors, we are using the metallised polypropylene so well known from LV power factor correction. Instead of flat pack windings, our capacitance is formed by compact cylindrical windings, avoiding the mechanical stress at the edges of the All Film flat packs. Dielectric breakdown insulate and regenerate by themselves, domino-like failures of series-connected capacitor elements are impossible. The capacitance remains practically unchanged throughout the operating life which is of particular interest for applications with tuning or detuning reactors. By that, phase asymmetries are impossible, and the costly star point monitoring by MV capacitor protection relais, typical for All Film capacitors, becomes obsolete.
In fault situations, MSD capacitors do not create short circuits, hence they cannot be protected by blow-out fuses. The rising internal pressure can be reliably detected and signalled by the integrated pressure switch.
Unlike All Film, MSD is manufactured without flammable liquid impregnates, and filled instead with eco-friendly solid, plant-oil-based resin. This offers advantages when using these capacitors in sensitive environment, in applications with high vibration stress, and during disposal at a later stage.
Available as three-phase ( WYE ) units in the range from 50 to 400kvar, for mains up to 12kV, 50/60Hz. Design in accordance with IEC60871, 61071 and 60110.

Features:

• Durability
• Low power consumption
• Shock resistance

In order to maintain our goodwill among the clients, we are engaged in manufacturing and supplying a quality assured range of LV APFC Panel that are also known as Low Voltage APFC Panel. Our offered panels are perfectly manufactured at by our diligent workforce making use of quality tested raw material and the ultra modern technology. These panels are used in various power stations and are highly appreciated by our clients for their unique features. Further, before the final dispatch from our end, these panels are tested against several parameters under the supervision of our quality controllers.

General Descriptions:

Any non-linear loads like:

• Non power factor corrected fluorescent and HID lighting fixture ballasts (40-80% p.f.)
• Arc welders (50-70% pf)
• Solenoids (20-50% pf)
• Induction heating equipment (60-90% pf)
• Small "dry-pack" transformers (30-95% pf)
• Induction motors (55-90%) etc

Can cause poor power factor. In many areas electricity boards imposes a penalty charge for low power factor (pf). A poor power factor due to an inductive load can be improved by addition of capacitors in shunt. Awareness of necessity of power factor quality is increasing. Enhancing power quality i.e improvement of power factor saves cost and ensures a rapid return on investments.
Installing "APIPL" APFC Panels provides a reliable solution for elimination of penalties and a cost reduction in the electricity bills by approximately 25%. This panel offers designs that are suitable for indoor or outdoor use. They are designed to minimize installation time and cost and offers high reliability, long life and is suitable for operation over a temperature range of - 10 C to 50 C. A wide range of ratings with standard devices are available.

Best Suitable For:

• This APFC panel is best suitable for
• Installations having thyristorised loads
• Municipal water pumping schemes
• Lift irrigation schemes
• DoT, Railways, CPWD requirement
• Upto 20% harmonic distortions
• 50 % over current
• 20 % over voltages

Salient Features:

User friendly Microprocessor based APFC Relay having following characteristics:

• Intelligent control
• Menu driven handling
• Self-optimizing control capability
• Large measuring voltage range
• Recall function of recorded values
• Four-quadrant operation (e.g. stand by generator)
• Powerful alarm output
• Current limiting contactors/Thyristors especially designed for capacitor switching
• Load manager and data logger can also be provided in additional to downloading data
• Provision for top and bottom cable entry
• Aesthetically designed dust proof cabinet with powder coating
• Cooling fan for efficient performance
• Completely wired and tested in works and supplied with all control and safety devices

Power Quality Analyzers, Energy Monitoring System, Power Quality Monitoring, Automatic Report Generation, Remote Access of Energy Data etc.

We are the leading manufacturer and supplier of Automatic Power Factor Controller. Our skilled professionals manufactured this controller at our premises with the use of high end technology and exquisite quality of components that are procured from the trusted vendors of the market. A team of our quality controllers strictly check its quality against varied parameters with the strong intention of delivering a best product to our clients. In addition to this, our offered controller can be availed by our esteemed clients in various technical specifications.
The power factor controller CR 2020 calculates the actual and reactive power in the mains from the measured current and voltage. It also determines if actual power is being consumed or delivered.
The controller identifies the power of the connected capacitor stages and connects or disconnects them in an optimized manner as required by the actual mains conditions. The regulation considers the frequency of changes in the reactive load and follows the principle of rotational switching. This guarantees that optimum power factor correction is achieved with the minimum number of switching operations.
It is also possible to determine a fixed capacitor value which is always added to the measured capacitor power. This is useful for the additional compensation of the reactive power of a transformer.
The integrated digital display can show the actual power factor, the mains frequency, the actual tariff, the programmed target power factor, the value of present harmonics, the connected and the missing capacitor power. This makes general and specific monitoring of the capacitor bank and its operating conditions possible. The power factor controller CR2020 is ready for operation with its preset functions immediately after installation without any modifications or adjustments. Available with 10 outputs.
Features:
Shock resistanceEasy to operateNo risk

Our well known company is specialized in manufacturing and supplying high quality range of Power Factor Controller that is widely used for enhancing the life of electrical equipment. Our offered controller is available in the market in various models, dimensions and other technical specifications as per the demands of our esteemed clients. Our quality experts test its quality on several parameters before the final dispatch. Apart from this, our valued clients can avail it from us at affordable rates.
The power factor controller PFR-X calculates the actual and reactive power in the mains from the measured current and voltage. It also determines if actual power is being consumed or delivered. It identifies the power of the connected capacitor stages and connects or disconnects them in an optimized manner as required by the actual mains conditions. The regulation considers the frequency of changes in the reactive load and follows the principle of rotational switching. This guarantees that optimum power factor correction is achieved with the minimum number of switching operations.
The integrated digital display can show the actual power factor, the mains frequency, the actual tariff, the programmed target power factor, the connected capacitor power.
The PFR-X is ready for operation with its preset functions immediately after installation without any modifications or adjustments. Available with 6 or 12 outputs.

Features:

• High capacity
• Easy to install
• Low maintenance