2 valve manifolds are designed for remote or separate mounting. Connecting from process side 1/2" npt(f) and instrument side 1/2" npt(f) connecting system impulse lines and transmitters, having simple two  valves configuration which allows for easy block or isolate, bleed or vent valve callbration of a static pressure transmitter or gauge. Bonnet Assembly  : Bonnet : back seated blow out proof. Spindle : ground and thread rolled. Packing below thread.  Spindle Tip : non-rotating tip shut-off type & soft seated. Dust cap : dust cap protects stem threads from external contamination heat code traceability Technical specifications  : Size : 1/4" & 1/2" End Connection : NPT, BSPT, BSP & Socket Weld. Working Pressure : 6000 psi (413 bar) Temperature Rating : PTFE 450° f(232°c) Grafoil 700° f (371°c") Material of Construction : SS 316l, SS 316, SS 304, C.S, F11, hastelloy, monel Optional sour gas service valves are available confirming to nace mr-01-75 Stem Packing : PTFE, Grafoil. Orifice : ø4.7 All valves are 100% factory tested prior to shipment. Testing : Pneumatic seat test is performed at 1/4 of working pressure. Hydrostatic shell test is performed at 1.5 times the working pressure optional test are available upon request. Lubrication : Molybdenum disulphide (mo s2)

Check  valves  are  used  for  controllng  flow  in  one diretion  only. Check  valves  should  never  be used  as  code  safety  relief  devices. Note : End  connections  available  in  NPT;  BSPT  ; Tube size; BSPP 100%  valve  are  factory  tested  prior to  despatch Pressure range from 1, 000 to 10, 000 psi. Cracking pressure 1 psi to 25 psi.

2 valve manifolds are designed for remote or separate mounting. Connecting from process side 1/2" npt(f) and instrument side 1/2" npt(f) connecting system impulse lines and transmitters, having simple two  valves configuration which allows for easy block or isolate, bleed or vent valve callbration of a static pressure transmitter or gauge. Bonnet Assembly  : Bonnet : back seated blow out proof. Spindle : ground and thread rolled. Packing below thread.  Spindle Tip : non-rotating tip shut-off type & soft seated. Dust cap : dust cap protects stem threads from external contamination heat code traceability Technical specifications  : Size : 1/4" & 1/2" End Connection : NPT, BSPT, BSP & Socket Weld. Working Pressure : 6000 psi (413 bar) Temperature Rating : PTFE 450° f(232°c) Grafoil 700° f (371°c") Material of Construction : SS 316l, SS 316, SS 304, C.S, F11, hastelloy, monel Optional sour gas service valves are available confirming to nace mr-01-75 Stem Packing : PTFE, Grafoil. Orifice : ø4.7 All valves are 100% factory tested prior to shipment. Testing : Pneumatic seat test is performed at 1/4 of working pressure. Hydrostatic shell test is performed at 1.5 times the working pressure optional test are available upon request. Lubrication : Molybdenum disulphide (mo s2)

We can offer a comprehensive range of  Welding Neck Flange  for the right technical solution. Ak Hydraulic & export wide selections of ANSI B16.5 Welding Neck Flange & ASME B16.47 Welding Neck Flange at most attractive price as per customer requirements, we can also manufacture Welding Neck Flange in ASTM/ASME/ANSI grades as per our customer budget, we enjoy the reputation supplying Welding Neck Flange at cheapest in steel industries around the globe.

2 valve manifolds are designed for remote or separate mounting. Connecting from process side 1/2" npt(f) and instrument side 1/2" npt(f) connecting system impulse lines and transmitters, having simple two  valves configuration which allows for easy block or isolate, bleed or vent valve callbration of a static pressure transmitter or gauge. Bonnet Assembly  : Bonnet : back seated blow out proof. Spindle : ground and thread rolled. Packing below thread.  Spindle Tip : non-rotating tip shut-off type & soft seated. Dust cap : dust cap protects stem threads from external contamination heat code traceability Technical specifications  : Size : 1/4" & 1/2" End Connection : NPT, BSPT, BSP & Socket Weld. Working Pressure : 6000 psi (413 bar) Temperature Rating : PTFE 450° f(232°c) Grafoil 700° f (371°c") Material of Construction : SS 316l, SS 316, SS 304, C.S, F11, hastelloy, monel Optional sour gas service valves are available confirming to nace mr-01-75 Stem Packing : PTFE, Grafoil. Orifice : ø4.7 All valves are 100% factory tested prior to shipment. Testing : Pneumatic seat test is performed at 1/4 of working pressure. Hydrostatic shell test is performed at 1.5 times the working pressure optional test are available upon request. Lubrication : Molybdenum disulphide (mo s2)

Check  valves  are  used  for  controllng  flow  in  one diretion  only. Check  valves  should  never  be used  as  code  safety  relief  devices. Note : End  connections  available  in  NPT;  BSPT  ; Tube size; BSPP 100%  valve  are  factory  tested  prior to  despatch Pressure range from 1, 000 to 10, 000 psi. Cracking pressure 1 psi to 25 psi.

2 valve manifolds are designed for remote or separate mounting. Connecting from process side 1/2" npt(f) and instrument side 1/2" npt(f) connecting system impulse lines and transmitters, having simple two  valves configuration which allows for easy block or isolate, bleed or vent valve callbration of a static pressure transmitter or gauge. Bonnet Assembly  : Bonnet : back seated blow out proof. Spindle : ground and thread rolled. Packing below thread.  Spindle Tip : non-rotating tip shut-off type & soft seated. Dust cap : dust cap protects stem threads from external contamination heat code traceability Technical specifications  : Size : 1/4" & 1/2" End Connection : NPT, BSPT, BSP & Socket Weld. Working Pressure : 6000 psi (413 bar) Temperature Rating : PTFE 450° f(232°c) Grafoil 700° f (371°c") Material of Construction : SS 316l, SS 316, SS 304, C.S, F11, hastelloy, monel Optional sour gas service valves are available confirming to nace mr-01-75 Stem Packing : PTFE, Grafoil. Orifice : ø4.7 All valves are 100% factory tested prior to shipment. Testing : Pneumatic seat test is performed at 1/4 of working pressure. Hydrostatic shell test is performed at 1.5 times the working pressure optional test are available upon request. Lubrication : Molybdenum disulphide (mo s2)

We can offer a comprehensive range of  Welding Neck Flange  for the right technical solution. Ak Hydraulic & export wide selections of ANSI B16.5 Welding Neck Flange & ASME B16.47 Welding Neck Flange at most attractive price as per customer requirements, we can also manufacture Welding Neck Flange in ASTM/ASME/ANSI grades as per our customer budget, we enjoy the reputation supplying Welding Neck Flange at cheapest in steel industries around the globe.