Butterfly Cutting Machine is specially design machine for Cutting PVC Buuterfly, Polyester Collar Stay and Banana Shape Cutting in Garment accessories.

Features:

• Multi Cavity Die Design
• Low Wastage Design
• Fully Wirecut for quality

Details:

• This Machine is for Plastic Collarbond and Butterfly Cutting.
• This Machine can cut Polyester, PVC, PET, PP.
• Machine equipped with Fully Automatic Feeder for Material Feeding.
• Machine runs at the rate of 50-80 Pc's Per Minute.
• Machine can cut Single or Double Sheet.
• New Twin Cam Piller design For better Life of Die Set.
• Inline Logo Punching for branding.
• Inline scrap cutters in Die.
• Digital Control Panel for Feed Length Settings.
• Inline Marking based counting.
• High Quality Steel for Die.
• Harden and Grinded Punch and Die Plates.
• Simple Die Changing.
• Any Shape and Size Collar Band Can Be Cut

We are one of the Manufacturers of Roll to Sheet Cutting Machine for cutting Paper, Board, Plastic, Gasket, Aluminium Rubber. Our Machines are highly accurate and sturdy. Gives you quality output without any Wastage. Features: High Accuracy 0.1 to 0.2 mmLow Wastage DesignPhoto Cell can be used for print mark detection for cutting Available from 12" to 60" Working.Six Set Of Male Female Rotary Shear Type Cutters for Slitting.Razor blade Cutting can be added.Only Slitter and sheeter or Slitter and Rewinder available.Servo Motor Feeding for Sheeting3 HP Three Phase electric Motor for Slitting2 HP Three Phase Electric Motor for Sheeter.Touch Screen Control Panel for Length Setting

Are highly accurate and sturdy.Paper Roll To Sheet Cutting Machine for Various Sizes. Fully Automatic Feeding By Servo Motor for High Accuracy in Cutting Length, Available with Slitting option for directly converting Big rolls into Small Sizes. Feed Length Setting is Done through Control Panel in just Few Seconds easily.Only Slitter and sheeter or Slitter and Rewinder available.

1. 20" Working Model.
2. For Cutting Two Round Corners in One Stroke.
3. Both Corner Cutting Die Distance Adjustable.
4. Fully covered Machines for safe Operation.
5. Die Made on CNC Machine for Good Finish
6. Die Distance can be change easily.
7. Can be used for Paper, board, PVC, PP Etc
8. Electro Magnet Foot Switch Operated
9. 1 HP Electric Motor.

We are one of the Manufacturers of Roll to Sheet Cutting Machine for cutting Paper, Board, Plastic, Gasket, Aluminium Rubber. Our Machines are highly accurate and sturdy. Gives you quality output without any Wastage.

Features:

• High Accuracy 0.1 to 0.2 mm
• Low Wastage Design
• Photo Cell can be used for print mark detection for cutting

Details:

• Available from 12" to 60" Working.
• Six Set Of Male Female Rotary Shear Type Cutters for Slitting.
• Razor blade Cutting can be added.
• Only Slitter and sheeter or Slitter and Rewinder available.
• Servo Motor Feeding for Sheeting
• 3 HP Three Phase electric Motor for Slitting
• 2 HP Three Phase Electric Motor for Sheeter.
• Touch Screen Control Panel for Length Setting
• Web aligner Optional.

Collarband Cutting Machine is Automatic Machine for Cutting PVC or PET Collarbands Automatically from Roller with Different sets of Die sets for different shapes and sizes.

Features:

• Good operating speed
• Longer functional Tool life
• Easy to operate

Details:

• This Machine is for Plastic Collar Band Cutting. This Machine can cut PVC, PET, PP.
• Machine equipped with Fully Automatic Feeder for Material Feeding.
• Machine runs at the rate of 90-100 Pc's Per Minute.
• Machine can cut Single or Double Sheet.
• New Twin Cam Four Piller design For better Life of Die Set.
• Inline Number Punching for slots.
• Inline Logo Punching for branding.
• Inline scrap cutters in Die.
• Digital Control Panel for Feed Length Settings.
• Inline Marking based counting.
• High Quality Steel for Die.
• Harden and Grinded Punch and Die Plates.
• Simple Die Changing.
• Any Shape and Size Collar Band Can Be Cut

Horizontal Hydraluic Die Cutting Machine used for cutting Cards, Lid Cover etc. This Machine can cut 300-400 sheets of cards in single stroke.Special Die set for Product and Wastage Cutting.

Features:

• Good Cutting Quality
• Easy To Operate
• Good Quality Throughout Production

Details:

• 10 Ton Hydraulic Pressure.
• Full control over quality and production.
• No stopage for wastage removal and cutting.
• Control panel for Forward Reverse Movement
• Runs on 3 HP electric motor.
• Die Capacity upto 2" to 12"

This is a newly developed machine for envelope cutting. With this machine we have given customer options of using traditional die set as well as One adjustable die sets for different sizes of envelope cutting. Machine has two cylinder design for better cutting capacity. Harden Four pillar design gives its good balance for cutting and also increases its accuracy of cutting. 10 Ton Cpacity machine with hydraulic power pack unit. Full Metal platform also with sliding type aluminium platform. Gauges for envelope cutting gives good control over job repetability.

Features:

• Easy to Operate
• Two In One Die Design
• Safe to Handle

Details:

• MS and CI Fabricated
• 24 x 18" , 24" x 36" Sizes
• 10 Ton Capcity cutting force
• Four Pillar Design
• 5 Hp Three Phase electric Motor for power pack
• Customize to suit customers need and productivity.
• Control panel with limit switch

1. Hand Operated Corner Cutting Machine.
2. Different Sizes of Round Radius Available
3. Heavy Duty MS and CI Fabricated.
4. Fully Powder coated.
5. Metal Table and Wooden Platform

1. 18", 24" Working Models
2. Also used for Single Line creasing, Index Cutting, Perforation.
3. Multi Purposed Machine can be used for some other operations.
4. Wooden Platforms and Gauges.
5. Easy to change Die Set takes less time for change over.
6. Line Perforation is Possible with a Die Change

Machine equipped with Fully Automatic Feeder for Material Feeding.Machine runs at the rate of 90-100 Pc's Per Minute.Machine can cut Single or Double Sheet.New Twin Cam Four Piller design For better Life of Die Set.Inline Number Punching for slots.Inline Logo Punching for branding.Inline scrap cutters in Die.Digital Control Panel for Feed Length Settings.Inline Marking based counting.High Quality Steel for Die.Harden and Grinded Punch and Die Plates.

Kappa Cutting Machine1. For Making Slots for Box Wrappers2. For Cutting Two Slots in one stroke3. 25 to 30 papers in one single stroke4. Slot Distance adjustable5. Foot Switch with Control Panel6. Electro Magnet Clutch7. 1 HP Electric Motor.

Hydraulic Envelope Punching Machine for Envelope Cutting. With this machine we have given customer options of using traditional die set as well as One adjustable die sets for different sizes of envelope cutting. Machine has two cylinder design for better cutting capacity. Harden Four pillar design gives its good balance for cutting and also increases its accuracy of cutting. 10 Ton Cpacity machine with hydraulic power pack unit. Full Metal platform also with sliding type aluminium platform. Gauges for envelope cutting gives good control over job repetability. Features: Easy to OperateTwo In One Die DesignSafe to Handle

It cuts wiro as per loops countPositions wiro at desire locationBook wiro insertion manually for less changeover problemsTwo Stations, One for inserting and One for ClosingAutomatic Hanger Insertion for CalendersFully Programmable Control PanelBlower for Wiro Paper wastage RemovalAuto Spool Unwinder

Box Corner Cutting Machine1. 6" Working Cutter.2. For Corner cutting of Box3. Harden and Grinded Cutters4. Electro Magnet Clutch5. Wooden Platform with Guage6. Foot Operated switch with Control Panel7. 1 HP Electric Motor.

Cutting Machine is Automatic Machine for Cutting PVC or PET Collarbands Automatically from Roller with Different sets of Die sets for different shapes and sizes. Features: Good operating speedLonger functional Tool lifeEasy to operate

Butterfly Cutting Machine is specially design machine for Cutting PVC Buuterfly, Polyester Collar Stay and Banana Shape Cutting in Garment accessories.

Features:

• Multi Cavity Die Design
• Low Wastage Design
• Fully Wirecut for quality

Details:

• This Machine is for Plastic Collarbond and Butterfly Cutting.
• This Machine can cut Polyester, PVC, PET, PP.
• Machine equipped with Fully Automatic Feeder for Material Feeding.
• Machine runs at the rate of 50-80 Pc's Per Minute.
• Machine can cut Single or Double Sheet.
• New Twin Cam Piller design For better Life of Die Set.
• Inline Logo Punching for branding.
• Inline scrap cutters in Die.
• Digital Control Panel for Feed Length Settings.
• Inline Marking based counting.
• High Quality Steel for Die.
• Harden and Grinded Punch and Die Plates.
• Simple Die Changing.
• Any Shape and Size Collar Band Can Be Cut

We are one of the Manufacturers of Roll to Sheet Cutting Machine for cutting Paper, Board, Plastic, Gasket, Aluminium Rubber. Our Machines are highly accurate and sturdy. Gives you quality output without any Wastage. Features: High Accuracy 0.1 to 0.2 mmLow Wastage DesignPhoto Cell can be used for print mark detection for cutting Available from 12" to 60" Working.Six Set Of Male Female Rotary Shear Type Cutters for Slitting.Razor blade Cutting can be added.Only Slitter and sheeter or Slitter and Rewinder available.Servo Motor Feeding for Sheeting3 HP Three Phase electric Motor for Slitting2 HP Three Phase Electric Motor for Sheeter.Touch Screen Control Panel for Length Setting

Are highly accurate and sturdy.Paper Roll To Sheet Cutting Machine for Various Sizes. Fully Automatic Feeding By Servo Motor for High Accuracy in Cutting Length, Available with Slitting option for directly converting Big rolls into Small Sizes. Feed Length Setting is Done through Control Panel in just Few Seconds easily.Only Slitter and sheeter or Slitter and Rewinder available.

1. 20" Working Model.
2. For Cutting Two Round Corners in One Stroke.
3. Both Corner Cutting Die Distance Adjustable.
4. Fully covered Machines for safe Operation.
5. Die Made on CNC Machine for Good Finish
6. Die Distance can be change easily.
7. Can be used for Paper, board, PVC, PP Etc
8. Electro Magnet Foot Switch Operated
9. 1 HP Electric Motor.

We are one of the Manufacturers of Roll to Sheet Cutting Machine for cutting Paper, Board, Plastic, Gasket, Aluminium Rubber. Our Machines are highly accurate and sturdy. Gives you quality output without any Wastage.

Features:

• High Accuracy 0.1 to 0.2 mm
• Low Wastage Design
• Photo Cell can be used for print mark detection for cutting

Details:

• Available from 12" to 60" Working.
• Six Set Of Male Female Rotary Shear Type Cutters for Slitting.
• Razor blade Cutting can be added.
• Only Slitter and sheeter or Slitter and Rewinder available.
• Servo Motor Feeding for Sheeting
• 3 HP Three Phase electric Motor for Slitting
• 2 HP Three Phase Electric Motor for Sheeter.
• Touch Screen Control Panel for Length Setting
• Web aligner Optional.

Collarband Cutting Machine is Automatic Machine for Cutting PVC or PET Collarbands Automatically from Roller with Different sets of Die sets for different shapes and sizes.

Features:

• Good operating speed
• Longer functional Tool life
• Easy to operate

Details:

• This Machine is for Plastic Collar Band Cutting. This Machine can cut PVC, PET, PP.
• Machine equipped with Fully Automatic Feeder for Material Feeding.
• Machine runs at the rate of 90-100 Pc's Per Minute.
• Machine can cut Single or Double Sheet.
• New Twin Cam Four Piller design For better Life of Die Set.
• Inline Number Punching for slots.
• Inline Logo Punching for branding.
• Inline scrap cutters in Die.
• Digital Control Panel for Feed Length Settings.
• Inline Marking based counting.
• High Quality Steel for Die.
• Harden and Grinded Punch and Die Plates.
• Simple Die Changing.
• Any Shape and Size Collar Band Can Be Cut

Horizontal Hydraluic Die Cutting Machine used for cutting Cards, Lid Cover etc. This Machine can cut 300-400 sheets of cards in single stroke.Special Die set for Product and Wastage Cutting.

Features:

• Good Cutting Quality
• Easy To Operate
• Good Quality Throughout Production

Details:

• 10 Ton Hydraulic Pressure.
• Full control over quality and production.
• No stopage for wastage removal and cutting.
• Control panel for Forward Reverse Movement
• Runs on 3 HP electric motor.
• Die Capacity upto 2" to 12"

This is a newly developed machine for envelope cutting. With this machine we have given customer options of using traditional die set as well as One adjustable die sets for different sizes of envelope cutting. Machine has two cylinder design for better cutting capacity. Harden Four pillar design gives its good balance for cutting and also increases its accuracy of cutting. 10 Ton Cpacity machine with hydraulic power pack unit. Full Metal platform also with sliding type aluminium platform. Gauges for envelope cutting gives good control over job repetability.

Features:

• Easy to Operate
• Two In One Die Design
• Safe to Handle

Details:

• MS and CI Fabricated
• 24 x 18" , 24" x 36" Sizes
• 10 Ton Capcity cutting force
• Four Pillar Design
• 5 Hp Three Phase electric Motor for power pack
• Customize to suit customers need and productivity.
• Control panel with limit switch

1. Hand Operated Corner Cutting Machine.
2. Different Sizes of Round Radius Available
3. Heavy Duty MS and CI Fabricated.
4. Fully Powder coated.
5. Metal Table and Wooden Platform

1. 18", 24" Working Models
2. Also used for Single Line creasing, Index Cutting, Perforation.
3. Multi Purposed Machine can be used for some other operations.
4. Wooden Platforms and Gauges.
5. Easy to change Die Set takes less time for change over.
6. Line Perforation is Possible with a Die Change

Machine equipped with Fully Automatic Feeder for Material Feeding.Machine runs at the rate of 90-100 Pc's Per Minute.Machine can cut Single or Double Sheet.New Twin Cam Four Piller design For better Life of Die Set.Inline Number Punching for slots.Inline Logo Punching for branding.Inline scrap cutters in Die.Digital Control Panel for Feed Length Settings.Inline Marking based counting.High Quality Steel for Die.Harden and Grinded Punch and Die Plates.

Kappa Cutting Machine1. For Making Slots for Box Wrappers2. For Cutting Two Slots in one stroke3. 25 to 30 papers in one single stroke4. Slot Distance adjustable5. Foot Switch with Control Panel6. Electro Magnet Clutch7. 1 HP Electric Motor.

Hydraulic Envelope Punching Machine for Envelope Cutting. With this machine we have given customer options of using traditional die set as well as One adjustable die sets for different sizes of envelope cutting. Machine has two cylinder design for better cutting capacity. Harden Four pillar design gives its good balance for cutting and also increases its accuracy of cutting. 10 Ton Cpacity machine with hydraulic power pack unit. Full Metal platform also with sliding type aluminium platform. Gauges for envelope cutting gives good control over job repetability. Features: Easy to OperateTwo In One Die DesignSafe to Handle

It cuts wiro as per loops countPositions wiro at desire locationBook wiro insertion manually for less changeover problemsTwo Stations, One for inserting and One for ClosingAutomatic Hanger Insertion for CalendersFully Programmable Control PanelBlower for Wiro Paper wastage RemovalAuto Spool Unwinder

Box Corner Cutting Machine1. 6" Working Cutter.2. For Corner cutting of Box3. Harden and Grinded Cutters4. Electro Magnet Clutch5. Wooden Platform with Guage6. Foot Operated switch with Control Panel7. 1 HP Electric Motor.

Cutting Machine is Automatic Machine for Cutting PVC or PET Collarbands Automatically from Roller with Different sets of Die sets for different shapes and sizes. Features: Good operating speedLonger functional Tool lifeEasy to operate