Ajmani Associates

Kanyapur, Asansol, West Bengal

We are functioning from Asansol(India); we are capable of serving the clients in a short time span. Apart from online payment processing methods, we also facilitate payment through offline mediums.

We promise to make delivery on time, as we have a wide spread network of logistic service providers and dealers. Being a high-flying name in this arena, we promise to deliver the best in line quality products. In addition to this, we make sure that the offered lot is prepared using the finest grade material.

Details

• Linear Motion Screens are operated either by a mechanical exciter or two unbalance motors. In both cases rotation in opposite directions creates linear vibration. Linear motion screens are very high performance machines, in terms of capacity and efficiency. They have a low inclination which varies between 0 degree and 15 degree due to this low inclination required head room height too becomes low. The drive is a combination of high amplitude and low frequency of vibration.
• The Linear Motion Screens are bolted Single , Double or Triple deck structure with a substantially rigid design. The screen body consists of the two side plates with bolted transverse supports and screen mounts. The screen box is based on an open design.
• The vibrating screen is supported above the substructure by means of helical coil compression springs. The screen installation angle can be varied to suit the application.
• The drive is through direct force exciter and Cardon shaft. The angle of throw is determined by the construction and application but usually 35 to 60 degree. The counterweights can be adjusted in stages from 50 to 100%. for variation of amplitude.
• There are several options for lubrication, oil or grease, which can be used without modification. Selected bearing seals ensure a long service life.

Applications:With single or multiple screen decks

• Coal, Coke, Pet Coke, Lignite, Limestone, Dolomite.
• Minerals, Ores, Pellets, Sinter
• Sand and Gravel, building materials
• Chemical Products, Fertilizers
• Compost, Refuse, Refuse Slags

We have parted our infrastructure into several units and one of them is storehouse. We update it on regular basis so as to meet stated industry standards. The assistance of our quality auditors helps us in acquiring quality-approved raw materials from the certified vendors. Thus, we ensure that our products are of unmatched quality.

Function

• Ajmani the manufactures impact crushers crush the feed by the reciprocal effect of shock and impact.
• Rotating baffle plates pick up the material and fling it against the armoured impact vibrators.
• During the impact the material is split at the natural cleavage faces to become cubical final products Without cracks.

Design

• Welded , rugged casing

• Screwed lining with high-carbon steel plates
• Hydraulically swiveling upper part
• Detachable connection of disk-type rotor and shaft
• Replaceable baffle plates, quadruple exploitation
• Dust proof self-aligning roller bearings of the rotor shaft
• Pendulum suspension of the impact vibrators
• Infinitely variable mechanical or hydraulic crushing edge adjustment

Pros

• Rugged structural shape
• Easy maintenance
• High degree of crushing
• Insensitive to foreign substance

Application

• Cement and limestone plants
•  Coal, ore and potash mining
•  Building, glass and chemical industries
•  Steel works

To enable our experienced engineering staff to recommend the installation best suited to specific applications, answers to as many of the following questions as possible will result in a prompt and accurate solution to your screening requirements

• Material to be crushed
• Maximum feed dimension
• Approximate feed size analysis
• Moisture content
• Stickiness
• Bulk Density
• Product sizes required
• Friability
• Abrasive Characteristics
• Do you intend close circuit operation
• Capacity desired in tons per hour

Being a reliable name in this arena, we make sure that the payment procedures remain secured with us. In addition, we issue invoice to the clients stating all the relevant information of the products. Our complete range of product is wrapped in strong, nontoxic, and superior-grade packs that protect the contents inside from damage, moisture, logistic movement, etc. Furthermore, the packaging has product details printed on it.

Function

• Ajmani manufacturers the single roller crushes separate the field material with high pressure in the wedge-shaped crushing space between

• the toothed roller and the adjustable crushing balancer
• The driven toothed roller draws the material into the crushing gap.
• Due to the high impact rate of the circulating crushing tooth segments the effective crushing action starts already above the toothed roller.

Design

• Welded robust housing
• Roller core shaped as a polygon with surface –ground supports for the crushing tooth segments.
• Locking of the segments by means of dovetail guides and fastening by screwed bolts
• Tooth shape and tooth pitch are adapted to the respective application
• Crushing tooth segments individually replaceable without lifting the crushing roller out.
• Crushing roller alternatively available with crushing rings.
• Crushing roller with dust-tighy encapsulated anti-friction bearing
• Stepless setting of crushing gap with optional mechanical or hydraulic overload protection
• Parallel evasion of crushing balancers on the occurrance of uncrushed components of the material

Fields of application

• Cement, gypsum, and limestone
• Coal and Patash Mining
• Building, glass and chemical industries
• Metallugical plants

Advantages

• Compact design
• Simple Maintenance
• High throughput
• Preserving crushing action
• Low undersize shares
• Scarcely any dust accurrence

To enable our experienced engineering staff to recommend the installation best suited to specific applications, answers to as many of the following questions as possible will result in a prompt and accurate solution to your screening requirements

• Material to be crushed
• Maximum feed dimension
• Approximate feed size analysis
• Moisture content
• Stickiness
• Bulk Density
• Product sizes required
• Friability
• Abrasive Characteristics
• Do you intend close circuit operation
• Capacity desired in tons per hour

Working in assistance with a brilliant inventory management system and capacious storehouse has enabled us to entertain urgent and massive requirements of the customers. Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Impact Hammer Crusher.

Function

• Ajmani impact hammer crushers crush the material by the reciprocal effect of impact and friction between the hammer heads and dht hammer path
• Ratio speed and the gap between hammer heads and the hammer path determine the final grain size.

Design

• Welded casing
• Side parts hydraulically swivellingh
• Big inspection doors
• Screwed lining with high-carbon steel plates
• Hammer path with wear-resistant baffle plates which are mechanically or hydraulically adjustable at all pivot points
• Dust-proof bearing of self-aligning rollers on the rotor shaft
• Rotor in disk-type design
• Resersible or single-direction design
• Hammer heads made of chrome alloy cast steel or composite casting
• Direct or V-belt drive

Advantage

• Coal and Potash industries
• Steel works
• Gypsum and limestone plants

To enable our experienced engineering staff to recommend the installation best suited to specific applications, answers to as many of the following questions as possible will result ina prompt and accurate solution to your screening requirements.

• Material to be screened
• Maximum feed dimension
• Approximate feed size analysis
• Moisture content
• Stickiness
• Bulk Density
• Separation sizes required
• Friability
• Abrasive Characteristics
• Do you intend close circuit operation
• Capacity desired in tons per hour

We are counted amidst the well-known names involved in providing quality products from Asansol(India).We team makes sure that all the trade transactions are made keeping all the details of the clients confidential.

Function

• Ajmani manufactures the double roller crushers separate the feed material with high pressure.
• The driven toothed rollers draw the material into the crushing gap.
• Due to the high impact rate of the circulating crushing tooth segments the effective crushing action starts already above the toothed roller.

Design

• Welded robust housing
• Roller core shaped as a polygon with surface-ground supports for the crushing tooth segments
• Locking of the segments by means of dovetail guides and fastening by screwed bolts
• Tooth shape and tooth pitch are adapted to the respective application
• Crushing tooth segments individually replaceable without lifting the crushing roller out
• Crushing roller alternatively available with crushing rings
• Stationary and loose rollers with dust light encapsulated anti-friction bearing
• Stepless setting of crushing gap with optional mechanical or hydraulic overload protection
• Parallel evasion of the loose roller on the occurance of uncrushed components of the material

Fields of application

• Cement, gypsum and limestone plants
• Coal, ore and potash mining
• Building, glass and chemical industries
• Metallurgical plants

Advantages

• Compact design
• Simple Maintenance
• High throughput
• Preserving crushing action
• Low undersize shares
• Scarcely any dust accurrence

To enable our experienced engineering staff to recommend the installation best suited to specific applications, answers to as many of the following questions as possible will result in a prompt and accurate solution to your screening requirements

• Material to be crushed
• Maximum feed dimension
• Approximate feed size analysis
• Moisture content
• Stickiness
• Bulk Density
• Product sizes required
• Friability
• Abrasive Characteristics
• Do you intend close circuit operation
• Capacity desired in tons per hour

In order to ensure zero-defect quality, we conduct several tests on the products prior to final dispatch. Assistance from skilled professionals and brilliant packaging unit has enabled us to meet specific requirements of the clients. Besides this, we make sure that the material used for wrapping them is of high quality.

As we are acknowledged for providing high quality products to the clients, we make use of only superior grade raw materials as inputs. The selection of raw material is done by our experts. We provide customized packaging solutions, as we understand each customer is unique. The packaging we provide is strong, non-toxic, and capable of braving shipping and handling.

Our complete range of product is wrapped in strong, nontoxic, and superior-grade packs that protect the contents inside from damage, moisture, logistic movement, etc. Furthermore, the packaging has product details printed on it. We are a reliable name in this arena and thus make sure that the services offered by us for payment are easy to use as well as offer hassle-free and instant transactions.

Ours is an Asansol (West Bengal, India) based organization that is involved in offering reliable fabrication works. We conduct the fabrication work using the advanced machines and techniques. We have a team of reliable personnel, who are experienced in the domain of fabrication work. Moreover, we fabricate according to the specific requirements of the clients. Thus, we ensure complete satisfaction. In addition to this, our services are professional and nominally charged.