AJ Technology

Makarpura GIDC, Vadodara, Gujarat

Power Control Centre (PCC) measured to be the base of an electrical organism in any industry. Hence it shall present users long term dependability, protection, low maintenance & testing time.

Power Control Centre (PCC) is used for distribution and control of different power source used in industry. Usually Power Control Centres is set up near power source hence fault level is high. It is planned to suit fault level of 50KA or 65 KA for 1 sec. Power Control Centres are intended to suit the fault level as well as temperature rise to 40°c above ambient. These are accessible in a wide range (from 630A to 6300 A) to match every user’s requirement.

Power Control Centre is Reliable, Compact and Safe

• Assemblies offering maximum reliability
• For each rated present range, most favourable connection conditions for cables
• Split function partitions consisting of a toggle device, auxiliary tools and a cable connection compartment for safety
• Contribute way with no any sacrifices in terms of practical specifications High short period existing carrying capacity for time-graded short-circuit guard assures dependable operation of the switchboard without being pretentious by short-circuit
• Suggestion & procedure in the door closed situation
• Main LT Panel, PCC With single, multiple incomer, bus couplers with proper interlocking required protection, fault indications, interlocking is provided.

We offer an extensive range of MCC Panel (Motor Control Center) that is a device used to control and actualize the performance of an electric motor. These MCC Panels are offered in a wide variety such as compartmentalized with ACB/ MCCB SFU, DOL, ATS or Star Delta Starters. This range of MCC Panels can be fully drawn out with incoming and outgoing feeders or non draw out type. The MCC Panels are extensively used for reducing start voltage, reversing control or varying the speed as per requirement and for protection against overloads and faults.

• Control centre can be single or double front operated
• Floor mounted design
• Automatic/ manual means of starting and stopping the motor
• Fully drawn out with incoming and outgoing feeders or non draw out type

Busbar Arrangement

The Busbar shall be housed in a separate compartment. The Busbar shall be isolated with 3 mm thick FRC or acrylic sheet to avoid any accidental contact. The Busbar shall be arranged such that minimum clearances between the Busbar are maintained as per below.
• Between phases : 27 mm min.
• Between phases and neutral : 25 mm min.
• Between phases and earth : 25 mm min.
• Between neutral and earth : 23 mm min.

Automatic Power Factor Control or APFC Panels are mainly used for the improvement of Power Factor. Power Factor is the ratio of active power to apparent power and it is a major component in measuring electrical consumption. APFC is an automatic power factor control panel which is used to improve the power factor, whenever required, by switching ON and OFF the required capacitor bank units automatically.

This is very strong and durable. It is very easy to operate. It is dust proof and has high tensile strength. It required low maintenance. This is also known as automatic power factor correction panels. This product is made of best quality of raw material. It is very eco-friendly. It is connected with electricity boards. This is widely used for installation purpose. It has micro controller switch.

Busbar Arrangement

The Busbar shall be housed in a separate compartment. The Busbar shall be isolated with 3 mm thick FRC or acrylic sheet to avoid any accidental contact. The Busbar shall be arranged such that minimum clearances between the Busbar are maintained as per below.
• Between phases : 27 mm min.
• Between phases and neutral : 25 mm min.
• Between phases and earth : 25 mm min.
• Between neutral and earth : 23 mm min.

Component Selection

• Detuned harmonic filters are the series combination of a reactor and power capacitor. This filter offers higher impedance for high frequency harmonics. This prevents harmonic resonance and amplification.
• Each capacitor bank is equipped with discharge devices capable of reducing the residual voltage to below 10% of the rated capacitor voltage in about 30 seconds.
• Delay timer used to protect Circuit from reverse flow while capacitor is discharging

An electrical junction box is an enclosure housing electrical connections, to protect the connections and provide a safety barrier. With MOC of SS, MS, FLP with IP rating of IP4etc.

AJ Technology is the most trustworthy name in supplying best quality retrofitting work in Vadodara Gujarat. Moving on deep knowledge & industrial experience, we are offering a very effective solution for Retrofitting work to any industrial or commercial structure. Our provided services are appreciated in the market for their quality features like client-centric. We utilise only high-grade material to deliver high-class fittings and work. Our tech-savvy team utilises their expertise to offer solutions that our customers will love. Furthermore, customers can avail our services at market leading prices. Join us now and let us fulfil your demands with premium-grade retrofitting work.

• Uniquely managed
• Technically efficient
• Customized facility

hmi control panel for process area, with front glass door for protection of hmi in moc of ss304 and ms enclosure

Control panel consist of a controller. Controller may be PLC, DCS, relay or some other type. It gives digital signal input signal to the MCC panel to start the motor. Control panel works based on the PLC /DCS program or the relay logic. Instruments are normally connected to control panel. Indications for the interlocks also will be there in control panel. Nowadays single panel is used of using separate control and MCC panel.

Ease in modification of logic, reduced size, means of remote communications and advances in the technology have made PLC Automation Control Panels an edge over conventional relay based systems. Control Systems Engineers has provided PLC based Panels from PLC of Allen Bradley, Siemens, ABB and etc., From small I/O application to the complex I/O systems are provided by the Control Systems Engineers. Control Systems Engineers have developed communication software's for remote communication of the PLC Panels in various different protocols. With PLC based Panels HMI/MMI are provided to provide the operator various messages and controls of the process plants touch screen MMI are provided. To effective control of the system.

Feature

Manufacturers across the globe capitalize on AC variable frequency drive technology to save money on their utility bills, increase quality control, decrease production downtime, and improve overall efficiency on production lines.

Power distribution panel is an essential component of every electricity supply system. These boards feed electrical power to different circuits that provide protective and efficient fuse and circuit breakers for every circuit and can be accessed with simplicity in case of an electrical fault. Power distribution system is increasingly growing with the incorporation of increasing level of building automation and renewables.

We have access to the best electrical power distribution board panel manufacturers, who have an experienced team of professionals. When working with electricity safety is the main consideration. Moreover, the panels are quality tested to precisely define every parameter before being delivered to the customers. A wide range of applications makes a high level of flexibility in the power distribution.

Power failure can be unpredictable; within seconds, it can shut down entire infrastructure by disabling all crucial operations. In order to keep track of varying types of equipment, distribution panels provide multiple outlets of power. To maintain the customer’s requirements for high performance and reliable power equipment, we supply a vast range of AMF Panels. With the help of the electric distribution panel, you can divide an electrical power into subsidiary circuits. These are widely used in commercial and industrial fields in order to supply more power. When you buy a product, you always make sure to buy a good quality one. We offer panel boards at a reasonable cost and high-quality.