Hygine Airtech brings truly world class HEPA filters that are reliable and economical devices for removing concentrations of sub-micronic particles of both biological and chemical origin Making of HEPA Filters: Filters consist of fibre glass filter core.The fibre glass medium is continuously pleated back and forth over corrugated separators that add strength to the core and provide air passages between the pleats.The core is then sealed in full depth metallic casing with special adhesives like polyurethane sealant. Filter media: Non-woven micro glass-fibre Separator: Aluminium Sealant: Eproxy Filter frame: Aluminium, Stainless Steel Max Temp: 120oC Max Humidity: 100%RH Test Method: Hot Dop Test, Cold Dop Test, Scan Test, Dimensional checks Efficiency: 99.97% at 0.3 micron size Initial pressure drop: Less than 25mm WG at rated flow

Bag filters are available in any size as per customer requirements, depending upon the air volume required to be handled* The filters can be fabricated with/without flange as per customer's choice.* Available in casing thickness from 0.5 mm to 1.5 mm in variants of Mild steel/Galvanized steel/Aluminium/Stainless steel with a surface finish of enamel painted or powder coated finish* Media is Non-Woven Polyester fibres chemically bonded with a layer of woven High density poly ethylene(HDPE) mesh for support on the exit side resulting in a media that is mechanically very strong. Other media's can be provided against specific requirements.* Electro - galvanized steel rod grill for bag support. * Bags are intra stitched to prevent bag ballooning.* Stitch holes are sealed using synthetic sealants* Bags are sealed with frame using synthetic sealants.* Epoxy sealants can be provided on specific requests.* Suitable for EU5 and EU6 operation as per DIN24185 part II or F5 & F6 as per EN779 Initial pressure drop of 8 mm WC.* Filtration efficiency of 99% down to 5 micron for IS7613 test dust No 2.

This is driven by the inherent performance advantages of the gel seal; a soft material that results in filter installations that are easy to seal and require low clamping pressure compared to typical foam gasket systems.

Hygine Airtech brings truly world class HEPA filters that are reliable and economical devices for removing concentrations of sub-micronic particles of both biological and chemical origin Making of HEPA Filters: Filters consist of fibre glass filter core.The fibre glass medium is continuously pleated back and forth over corrugated separators that add strength to the core and provide air passages between the pleats.The core is then sealed in full depth metallic casing with special adhesives like polyurethane sealant. Filter media: Non-woven micro glass-fibre Separator: Aluminium Sealant: Eproxy Filter frame: Aluminium, Stainless Steel Max Temp: 120oC Max Humidity: 100%RH Test Method: Hot Dop Test, Cold Dop Test, Scan Test, Dimensional checks Efficiency: 99.97% at 0.3 micron size Initial pressure drop: Less than 25mm WG at rated flow

Bag filters are available in any size as per customer requirements, depending upon the air volume required to be handled* The filters can be fabricated with/without flange as per customer's choice.* Available in casing thickness from 0.5 mm to 1.5 mm in variants of Mild steel/Galvanized steel/Aluminium/Stainless steel with a surface finish of enamel painted or powder coated finish* Media is Non-Woven Polyester fibres chemically bonded with a layer of woven High density poly ethylene(HDPE) mesh for support on the exit side resulting in a media that is mechanically very strong. Other media's can be provided against specific requirements.* Electro - galvanized steel rod grill for bag support. * Bags are intra stitched to prevent bag ballooning.* Stitch holes are sealed using synthetic sealants* Bags are sealed with frame using synthetic sealants.* Epoxy sealants can be provided on specific requests.* Suitable for EU5 and EU6 operation as per DIN24185 part II or F5 & F6 as per EN779 Initial pressure drop of 8 mm WC.* Filtration efficiency of 99% down to 5 micron for IS7613 test dust No 2.

This is driven by the inherent performance advantages of the gel seal; a soft material that results in filter installations that are easy to seal and require low clamping pressure compared to typical foam gasket systems.