Post Buy Requirement
AIR-N-GAS Process Technologies
Ahmedabad, Gujarat, India
Verified Add Review

Dryers #1198531

Two Tower Low Pressure Air Dryer

Two Tower Low Pressure Air Dryer

View Complete Details

Refrigerated Bio Gas Dryer

Refrigerated Bio Gas Dryer, offered by us, is well tested and therefore, is the perfect option on which buyers can easily rely. We are enlisted among the reputed Manufacturers, Exporters and Suppliers of Refrigerated Bio Gas Dryer. We are efficient enough to process retail as well as bulk orders for retail as well as bulk orders for Refrigerated Bio Gas Dryer even at short notice period.

View Complete Details

Industrial Gas Dryers

We offer industrial gas dryers. This is the simplest of all desiccant based air dryers. In this dryer two desiccant towers are used. While one tower is in drying, second tower undergoes regeneration simultaneously. Part of dry air coming out from tower in-line goes for regeneration of the second tower. Tower changeover takes place at every 5 minutes by a sequence controller mounted in control panel. Salient features:- simple operation.Easy to maintain.Microprocessor based controller with purge saver. No need of heater or cooler.Atmospheric dew point of (-) 40 to (-) 60 deg c can be easily achieved. Simple operation.
View Complete Details

Air Dryers

We offer air dryers. The simplest way of removing moisture from compressed air is to reduce the temperature. In this dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3 deg c is passed through the other side of the heat interchanger. At this temperature most of the moisture is condensed which is then separated and drained out in moisture separator. Salient feature:- simple non cyclic operation.Low operating cost.Low noise.Zero purge losseven lubricated air can be driedsuitable for any capacitypdp of 3 deg celectronic controlenvironment friendly refrigerant.
View Complete Details

Heat Of Compression Air Dryer

We bring forth superior quality Heat Of Compression Air Dryer, which is widely demanded among the clients owing to its qualitative features. Our Heat Of Compression Air Dryer is used to heat the air for regeneration. Further, this Heat Of Compression Air Dryer can be availed in various specifications as per the requirement. Features

  • No purge loss
  • Saving on electrical Heater load
  • Atmospheric dew point of (-) 600C can be easily achieved
  • Most economical in the range from 400 CFM onwards

                                                                                                                                                                                                                                                                   

Technical Specifications

Model No. Capacity Pipe Line size mm Cooling Water Reqt. LPM Approx. Overrall Dimensions
M3 / HR CFM Length mm Width mm Height mm
HOC - 01 81.5 50 25 12 1400 1200 1800
HOC - 02 122.7 75 25 18 1500 1200 1800
HOC - 03 163 100 25 24 1600 1400 1800
HOC - 04 244.5 150 40 36 1800 1500 2000
HOC - 05 326 200 40 48 1800 1500 2000
HOC - 06 489 300 50 72 2000 1500 2200
HOC - 07 652 400 50 96 2000 1500 2200
HOC - 08 815 500 65 120 2000 1800 2200
HOC - 09 987 600 65 144 2200 1800 2400
HOC - 10 1222 750 80 180 2400 1800 2400
HOC - 11 1630 1000 80 240 2500 2000 2600
HOC - 12 2037 1250 100 300 2500 2000 2800
HOC - 13 2445 1500 100 360 2500 2000 3000
HOC - 14 3260 2000 125 480 3000 2000 3000
HOC - 15 4075 2500 125 600 3000 2000 3400

Download Detail File : Click Here

Graph


Download Detail File : Click Here
View Complete Details

Internally Heated Air Dryer

15 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Specialities Saving in purge air loss, Compact design , Simple operation , Advanced version of desiccant dryer
  • Brand Name AIR N GAS
  • Automatic Grade Automatic
  • Air Capacity 5 to 3000 NM3/Hr
  • Operating Pressure 2 to 50 kg/cm2g
  • Dew Point -40oC to -80oC

Graph


Download Detail File : Click Here
View Complete Details

No Purge Loss Air Dryer

  • Min. Order (MOQ) 1 Piece
  • Max Temperature 180 Deg C
  • Capacity 500-5000 CFM
  • Minimum Output Dew Point -20 C
  • Drying Capacity 21 - 50 cfm
  • Automatic Grade Automatic
  • Dryer Horse Power 1 HP
  • Maximum Pressure 4 bar
  • Design Customized
View Complete Details

Split Flow No Purge Loss Dryer

We are a trusted Manufacturer and Supplier of Split Flow No Purge Loss Dryer from India. Our Split Flow No Purge Loss Dryer is known for its sturdy construction, durability and high performance. These Split Flow No Purge Loss Dryers are offered at market leading prices. Advantages

  • No purge loss.
  • No need of blower.
  • No used of external air thus eliminating risk of contamination.
  • Most economical in the range from 400 CFM onwards                                                                                                                                                                                                                                                            

Technical Specifications

Model No. Capacity Pipe Line size mm Power Consumption KWH/DAY Cooling Water Reqt. LPM Approx. Overrall Dimensions
M3 / HR CFM Length mm Width mm Height mm
NPL - 01 1630 100 25 43.2 14 1600 1400 1800
NPL - 02 244.5 150 25 64.8 21 1800 1500 2000
NPL - 03 326 200 25 86.4 28 1800 1500 2000
NPL - 04 489 300 40 129.6 42 2000 1500 2200
NPL - 05 652 400 40 172.8 56 2000 1500 2200
NPL - 06 815 500 50 216 70 2000 1800 2200
NPL - 07 978 600 50 259.2 84 2200 1800 2400
NPL - 08 1222 750 65 324 105 2400 1800 2400
NPL - 09 1630 1000 65 432 140 2500 2000 2600
NPL - 10 2037 1250 80 518 175 2500 2000 2800
NPL - 11 2445 1500 80 648 210 2500 2000 3000
NPL - 12 3260 2000 10 842 280 3000 2000 3000
NPL - 13 4075 2500 10 1030 350 3000 2000 3000

Download Detail File : Click Here

Graph


Download Detail File : Click Here
View Complete Details

MPSA Biogas Purification Plant

49 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Power Upto250W
  • Country of Origin Made in India
  • Application Industrial
  • Plant Design Customized
  • Voltage 240-280V
  • Waste Processing Capacity More Than 5000 kg/day
  • Material IRON
  • Plant Capacity CUSTOMER REQUIREMENT
  • Brand AIRNGAS
  • Waste Input 500-1000 kg
View Complete Details

Three Tower Low Pressure Air Dryer

Hoc Air Dryer

We offer hoc air dryer. In non-lubricated air compressors, great amount of heat is generated which is lost due to cooling in after cooler. In heat of compression type dryer this heat is utilized to heat the air for regeneration. In this dryer hot compressed air is passed through a heater to maintain the temperature around 180 deg c, which is then passed through the desiccant bed for regeneration. After taking out the moisture this air is cooled in an after cooler where moisture is condensed and drained out in moisture separator. Then this cooled air is passed through the other tower of desiccant for drying. Salient features:- no purge loss.Saving on electrical heater load.Atmospheric dew point of (-) 600c can be easily achieved.Most economical in the range from 400 cfm onwards
View Complete Details

Desiccant Bio Gas Dryer

Desiccant Bio Gas Dryer that we offer is manufactured under the strict vigilance of experts. Thus, buying it from us will be the safest option for the buyers. We are named among the renowned Manufacturers, Exporters and Suppliers of Desiccant Bio Gas Dryer. Our Desiccant Bio Gas Dryer is subjected to stringent quality tests prior to its final dispatch. One can obtain the dryer from us at the best market price.

View Complete Details

Heatless Air Dryer

Avail from us, high performing Heatless Air Dryer, which has two desiccant towers. These two towers provide drying and regeneration respectively. These Heatless Air Dryers are available in various specifications to meet the varied requirements of the clients. Highlighting Features

  • Simple operation
  • Easy to maintain
  • Microprocessor based Controller with Purge Saver
  • No need of heater or cooler
  • Atmospheric dew point of (-) 40 to (-) 60 Deg C can be easily achieved. Simple operation

Technical Specifications

Model No Capacity Pipe Line size mm Approx. Space Requirement (mm)
M3 / HR CFM Length mm Width mm Height mm
ANGHL - 10 15 10 15 NB 600 600 750
ANGHL - 20 35 20 15 NB 600 600 1000
ANGHL - 30 50 30 15 NB 600 600 1200
ANGHL - 50 85 50 25 NB 700 700 1800
ANGHL - 100 170 100 25 NB 800 800 1800
ANGHL - 150 250 150 40 NB 800 800 2200
ANGHL - 200 350 200 40 NB 1000 1000 2200
ANGHL - 500 850 500 50 NB 1400 1400 2400
ANGHL - 1000 1700 1000 80 NB 1600 1600 2600
ANGHL - 1500 2550 1500 100 NB 2000 2000 3000
ANGHL - 2000 3400 2000 100 NB 2000 2000 3000
ANGHL - 2500 4250 2500 100 NB 2000 2000 3000
ANGHL - 3000 5100 3000 125 NB 2000 2000 3000
ANGHL - 3500 5950 3500 150 NB 2000 2000 3000
ANGHL - 4000 6800 4000 150 NB 2000 2000 3000

Download Detail File : Click Here

Graph


Download Detail File : Click Here
View Complete Details

Heatless Dryer

we offer Heatless Dryer. This is the simplest of all desiccant based air dryers. In this dryer two desiccant towers are used. While one tower is in drying, second tower undergoes regeneration simultaneously. Part of dry air coming out from tower in-line goes for regeneration of the second tower. Tower changeover takes place at every preset timing by a sequence controller mounted in control panel. Salient Features:- Simple operation.Easy to maintain.Microprocessor based Controller with Purge Saver. No need of heater or cooler.Atmospheric dew point of (-) 40 to (-) 60 Deg C can be easily achieved. Simple operation.
View Complete Details

Landfill Gas Dryer

We offer landfill gas dryer. Air-n-gas process technologies has designed systems to condition methane generated through anaerobic digestion for optimal use in microturbines or combustion engines, and water vapor to protect gas compressors and to remove water vapor from low-btu gas to meet contract specifications.Designed specifically for this application is our refrigerated, landfill digester gas dryer. It is an ideal solution to remove harmful water vapor to improve the combustible quality of landfill gas and biogas, especially when the inlet gas temperature is between 40c and 45c. Product features include patented dew point sensor and flood level control, stainless steel heat exchanger tubes and moisture separator and modular construction for ease of servicing.
View Complete Details

Refrigerated Air Dryer

We are engaged in providing high quality Refrigerated Air Dryer that is manufactured in compliance with set industrial standards. The Refrigerated Air Dryer is known for its high performance and longer working life. Manufactured with precision, our Refrigerated Air Dryer is high on demand among the various industries. Features

  • Simple non -cyclic operation
  • Low Noise
  • Zero Purge Loss
  • Even lubricated air can be dried
  • Suitable for any capacity
  • PDP of 3 Deg C
  • Electronic control
  • Environment friendly refrigerant
  • Low operating cost

Technical Specifications

Model No. Capacity Pipe Line Size (MM) Air Cooled (AC) Power Consumption Water Cooled Refrigerant Dimensions (MM)
CFM Power Consumption n KW Water Consumption n LPM Length H Width H Height H
ANGRDA 10 10 15 0.11 - - R- 134A 500 450 450
ANGRDA 20 20 15 0.15 - - R- 134A 500 450 450
ANGRDA 30 30 15 0.22 - - R- 134A 550 500 550
ANGRDA 50 50 25 0.38 - - R- 134A 600 600 650
ANGRDA 100 100 25 0.55 - - R- 134A 750 750 800
ANGRDA 200 200 40 1.14 - - R- 22 1000 1000 1200
ANGRDA 500 500 50 2.14 - - R- 22 1500 1500 2000
ANGRDA 750 750 65 3.2 1.84 45 R- 22 2000 2000 2000
ANGRDA 1000 1000 80 4.78 3.17 60 R- 22 2200 2200 2000
ANGRDA 1500 1500 100 6.85 4.93 90 R- 22 2500 2200 2000
ANGRDA 2000 2000 100 - 6.76 120 R- 22 2500 2500 2000
ANGRDA 4500 4500 200 - 14 250 R- 22 3000 2500 2500

Note : Above Ratings are at the following conditions : Inlet Air Temperature; 40 oC Air Pressure : 7.0 Kg/Cm2g Pressure deq Point; 3 oC

View Complete Details

Blower Refrigerated Air Dryer

We are instrumental in offering Blower Refrigerated Air Dryer to the clients. Our Blower Refrigerated Air Dryer is integrated with advanced features. The Blower Refrigerated Air Dryer offered by us, is available in various specifications and at most affordable prices. Salient Features
  • Low operating cost for high capacities
  • Dew point upto (-) 60 Deg C can be achieved
  • Most economical in the range from 1000 CFM onwards
  • Longer working life

Graph


Download Detail File : Click Here
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us