Our Products
Steel & Steel Products
1 Products availableSafety System & Equipments
1 Products availableTrolleys
1 Products availableOffice And Commercial Furniture
1 Products availableModular Office Workstation
1 Products availableWe offer a complete product range of Static Pass Box, Dynamic Pass Box, Air Shower and Reverse Laminar Air Flow
Static Pass Boxes Ventilated Pass Boxis widely used for transferring the material from and into the clean room, without contaminating the air of clean room & without having to open room door. These cleanroom pass boxes can be installed on the wall between the clean room and other room.
Our range of static pass boxes is available in various specifications as per the clients requirements.
Static Pass Box Ventilated Pass Boxis with a variety of standard dimensions also our pass boxes can be custom engineered to any size. Static Pass Boxes Ventilated Pass Box are available in powder coated Mild Steel, SS 304 / 316 / 316Lor a combination of both.
Standard Model Available
| Door : | SS 304 double walled door construction with flush glass view panels with SS handles and SS hinges. |
| Interlocking : | Electro-Magnetic Interlocking type door arrangement to ensure that only one side door can be opened at any given time. |
| Door Indication : | Indicators on either side for door open condition. |
| Door release : | Door release Switch on either side. |
| SS coving : | Internal covings for easy cleaning. |
Optional Accessories :
Documentation :All necessary documents will be provided as per the latest prevailing standards.
| MODEL NO. | INTERNAL DIMENSIONS (MM) | EXTERNAL DIMENSIONS (MM) | ELECTRICAL |
|---|---|---|---|
| SPB-18- 18 -18 | 450 X 450 X 450 | 580 X 520 X 650 | 230V AC 1- Ø 50HZ / |
| SPB-24- 24 -24 | 610 X 610 X 610 | 740 X 680 X 810 | 415V AC 3-Ø 50HZ |
Dynamic Pass Boxis designed to allow material transfer through controlled environment without much personnel movement to minimize man /material movement & avoid cross contamination between different classified areas. This is essentially installed to minimize movement of personnel for transfer of material into and from the clean room.
It aids to achieve desired classification, maintain integrity of products, process & controls ingress of particulate contaminants into clean room & between different classified areas. Our range ofDynamic Pass Boxis available in various specifications as per the clients requirements.
Dynamic Pass Boxis with a variety of standard dimensions also our pass boxes can be custom engineered to any size.Dynamic pass boxesare available in powder coatedMild Steel, SS 304 / 316 / 316Lor a combination of both.
Technical Specification :
| HEPA Filter : | Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3. |
| Pre-filter : | Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5. |
| MotorAlower Assembly : | Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. |
| Differential Pressure Gauge : | Dwyer make magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. |
| Door : | SS 304 double walled door construction with flush glass view panels with SS handles and SS hinges. |
| Interlocking : | Electro-Magnetic Interlocking type door arrangement to ensure that only one side door can be opened at any given time. |
| Door Indication : | Indicators on either side for door open condition. |
| Door release : | Door release switch on either side |
| SS coving : | Internal covings for easy cleaning |
| ON/OFF Switches : | SS ON/OFF switches for motor & lights |
| Switch Socket : | 6/15 amp single-phase switch socket use for external equipment |
| DOP Port : | DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO solution). |
| Electrical Supply : | 230V AC 1- 50HZ / 415V AC 3- 50HZ |
| Noise Level : | Less than 67 dB on scale n when ambient is not greater then 55 db on scale A |
| Vibration Level : | Minimum |
Optional Accessories :
| MODEL NO. | WORK AREA DIMENSION IN MM | AIRFLOW VELOCITY (DOWN FLOW) |
AIR CLEANLINESS | AIR FLOW |
|---|---|---|---|---|
| DPB-18-18-18 | 450 X 450 X 450 | 0.45±0.05mps/ | ISO Class 5(ISO 14644-1:1999 (E)) / | Vertical – Recirculatory |
| DPB-24-24-24 | 610 X 610 X 610 | 90(fpm) | Class 100 (U.S. FED STD 209 E) |
Air Showeris designed to supply Class 100 HEPA filtered air at high velocity it helps remove particulate matter from the personnel entering into the clean room. Air shower works as partial clean equipment installed at the partition between the clean room and non-clean rooms to shower the personnel or matters before entering the clean area. This unit helps to remove dust effectively and maintains the normal working status.
Air shower is available in various standard dimensions. The cabinet can be custom engineered to fit any size. These Showers are available in powder coatedMild Steel, SS 304 / 316 / 316Lor a combination of both.
Technical Specification :
| Supply filter : | Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3. |
| Pre-filter : | Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5. |
| MotorAlower Assembly : | Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. |
| Differential Pressure Gauge : | Dwyer Make Magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. |
| Lighting : | Fluorescent light (250 Lux) at work surface |
| ON/OFF Switches : | SS ON/OFF switches for motor & lights |
| Switch Socket : | 6/15 amp single-phase switch socket use for external equipment |
| Control System : | Interlocking system to ensure that both the doors cannot open at the same time & to ensure that both the doors stay locked during the time of air flow. |
| Time settingfor Air shower : | Time setting for air shower operation time (settable for 30 seconds to 5 minutes) |
| Emergency Operation : | Emergency Stop will be provided |
| Door Opening : | Straight entry Straight exit and 90 degree door opening. |
| Operation mode : | Automatic as well as manual mode |
| DOP Port : | DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO Solution). |
| Door : | SS 304 doors with double walled flush glass view panels and door closer |
| Electrical Supply : | 230V AC 1-0 50HZ / 415V AC 3-0 50HZ |
| Noise Level : | Less than 67 dB on scale A when ambient is not greater than 55 dB on scale A |
| Vibration Level : | Minimum |
Optional Accessories :
Laminar Air Flowis designed to provide Class 100 working environment at rest with built in scavenging system to ensure product, operator as well as surrounding environment protection. The Reverse Laminar Airflow Bench finds a major application in sampling and dispensing. Majorly used for mixed airflow stream to control the hazardous emission of dust powder during dispensing or sampling process. This ensures to draw powder aerosols away from the operator and the operating environment protecting products and providing safe working conditions for personnel.
Reverse Laminar Air Flow Unitoperates on a re-circulatory airflow principle providing containment by air movement. The pre-filters at the base of the rear wall capture the airborne contaminants generated. Intake velocity at pre-filters increases to ensure scavenging effect. A small percentage of air is discharged from the booth through the bleed exhaust HEPA filter to maintain the working space under negative pressure.
Reverse Laminar Air Flow Unitis with a variety of standard dimensions also our cabinet can be custom engineered to any size. Reverse Laminar air flow are available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both.
Technical Specification :
| Supply filter : | Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3. |
| ExhaustHEPA filter : | Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.999% for 0.3. |
| Intermediate Filter : | Intermediate filter are made from non-woven synthetic with HDPE mesh; conforms to EU 7 Grade, with an efficiency rating better than 95% down to 3. |
| Pre-filter : | Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10. |
| MotorBlower Assembly : | Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. |
| Differential Pressure Gauge : | Dwyer Make Magnehelic Gauge (0 -25 mm: 2 Nos.) to monitor pressure drop across HEPA & Intermediate filter and (0-10 mm 1 No.) across prefilter. |
| Lighting : | Fluorescent light (250 Lux) at work surface |
| ON/OFF Switches : | SS ON/OFF switches for motor & lights |
| Switch Socket : | 6/15 amp single-phase switch socket use for external equipment |
| Control Panel : | Electrical control panel mounted on the side panel of the unit. |
| DOP Port : | DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO Solution). |
| Side Panel : | SS 304 Double Walled Side Panels. |
| Electrical Supply : | 230V AC 1- 50HZ / 415V AC 3- 50HZ |
| Noise Level : | Less than 67 dB on scale A when ambient is not greater than 55 dB on scale A |
| Vibration Level : | Minimum |
Optional Accessories :
Pinjore, Panchkula, Haryana