Our Products
Measurement Gauges & Fittings
2 Products availableIndustrial Machinery
2 Products availableLaboratory Equipments
2 Products availableTesting Equipments
2 Products availableLaboratory Shakers
2 Products availableOil Plant And Extraction Machinery
2 Products availableOur offered Product range includes Mortar Mixer, Field Density Kit and Plastic Wares.
It is having graduation up to 15 cm with a least count of 1 mm at one side and up to 6" x 0.01" on other side.
It is used for mixing cement pastes, mortars and pozzolanas.
The mixer consists of an epicycle type Stainless Steel Paddle imparting both planetary and revolving motion, by means of gears. Mixers have two speeds of 1405 RPM and 28510 RPM with planetary motions of approximately 625 RPM and 12510RPM respectively.
The stand of the mixer has an arrangement to raise or lower the bowl. Stainless Steel Bowl of about Six Ltr. capacity is fitted with handle. It shall be provided with a lid made of non-absorbing material and not attached by cement, masonry cement, cement pozzolana mixture or lime pozzolana mixture.
Carries up to 7 sieves of 200mm Diameter. The shaker is driven by HP motor through a reduction gear immersed in oil. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop pin below the table is removed, the shaker can have rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilised. A pair of rods and a holder is supplied.
The holder can be fixed on the top of the upper most sieve and thus the sieve set is firmly held. Suitable for operation from 230 Volts, 50 Cycles, Single Phase, AC Supply. Complete with 0-60 minutes Mechanical Timer.
.
Crucibles in this series have nominal capacities ranging from 10 cc to 100 cc. All crucibles are exactly similar in shape and proportion with dimensions confirming simple ratios. These crucibles are designed with extra thick base, to withstand heavy wear. Unless specified, crucibles is always supply having plain rim and with lid. The purity of Platinum metal used for manufacture of these crucibles is 99.95% at least.
Used for finding Specific gravity of Hydraulic cement. Made from borosilicate glass.
The flask is 243mm in total height, having a bulb of 90 mm Dia of 250 ml approximate capacity. The long neck of a flask has at top a funnel of 50 mm Dia in which fits a ground glass stopper. The neck has overall 11 mm I.D. upper portions graduated from 18 ml to 24 ml with 1ml graduation.
Complete with 1 Point Push Button Calibration, Hold, Auto-Off & Self Diagnostic Messages.
Measures thickness of Non-conductive coatings on conductive base. It is for anodizing & coating on Brass & Aluminium.
Interchangeable probe sleeve tip (A) having points for flat & spherical surface. Interchangeable probe sleeve (B) having V block for cylindrical surface.