AHP MACHINES

Chikhali, Pune, Maharashtra

AAC Block making plant is a highly thermally insulating concrete-based material used for both internal and external construction. Besides AAC's insulating capability, one of its advantages in construction is its quick and easy installation, because the material can be routed. AAC is well suited for urban areas with high rise buildings and those with high temperature variations. Due to its lower density, high rise buildings constructed using AAC require less steel and concrete. Autoclaved aerated concrete is cured in an autoclave - a large pressure vessel. In aircrete production the autoclave is normally a steel tube some 1.6 meter in diameter and 31 meters long. Steam is fed into the autoclave at high pressure, typically reaching a pressure of 800 kPa and a temperature of 180 C. The autoclaved aerated concrete production process differs slightly between individual production plants but the principles are similar. We will assume a mix that contains cement, lime and sand; these are mixed to form a slurry. Also present in the slurry is fine aluminum powder - this is added to produce the cellular structure. The density of the final block can be varied by changing the amount of aluminum powder in the mix. We are offering our clients wide range of AAC block, Manufactured as per the international standards. The products are fabricated using the high grade raw materials. Our products are highly demanded in the industry for their superior quality.

We have excelled and have a good experience in manufacturing of inter locking paver blocks making machine. Blocks are produced by a high pressure hydraulic press. Our paver block making machine can manufacture paving blocks in various aesthetic designs to give a pleasing look to the pavement. Our machine can produce the paver blocks with and without colour. We also offer excellent after sales services on these Automatic Color Paver Block Machines to assure hassle free operation at clients end. Application of theses paver blocks can be done in lying of paths, embankment slopes, sand stabilization area, gardening, landscapes, and etc.

Fully Automatic Fly Ash Brick Making MachinesAAC Block Making Plants ( Autoclave Aerated Concrete )Automatic Fly Ash Brick MachinesSemi Automatic Fly Ash Brick MachinesInterlocking Paver Block MachinesCLC Block Making Machines ( Cellular Light Weight Concrete )Laying MachinesPaver Block Table Vibrators

AHP Machines are the leading manufacturer of fully automatic fly ash brick making machine, our machine has features like Automatic Raw material weighing, Auto mixing, Batching plant, Silos, Discharge of finished bricks through Conveyer for fast production . Raw materials used for the production of fly ash bricks is fly ash, sand, lime and gypsum or cement.

Foam Concrete is also known as Cellular light weight concrete", "CLC", "Foamed cement", "Light Weight Concrete" across the world with its greater advantages. CLC BLOCKS Cellular light weight concrete also known as foamed concrete is cast as the building blocks that uses Fly ash, cement , Sand as its raw material . They can be produced in a wide range of density from 400 to 1800 kgcubic meter. We are pioneers in manufacturing of Cellular lightweight concrete plants. We manufacture plants of capacity ranging between 15 cu m to 120 cu m per day. Production of CLC does not require a large factory setup. This makes cost production of CLC much lesser than that of AAC. CLC light weight blocks can be produced onsite as well due to its simple manufacturing process. Cellular Lightweight Concrete ( CLC ) is conventional concrete, where natural aggregate (gravel) is exchanged for the best insulation medium available, namely air, embedded in an organic and bio-degradable foam that offers no chemical reaction but solely serves as wrapping material for the air.

AHP Machines are the leading manufacturer of fully automatic fly ash brick making machine, our machine has features like Automatic Raw material weighing, Auto mixing, Batching plant, Silos, Discharge of finished bricks through Conveyer for fast production . Raw materials used for the production of fly ash bricks is fly ash, sand, lime and gypsum or cement.

Fully Automatic Fly Ash Brick Making MachinesAAC Block Making Plants ( Autoclave Aerated Concrete )Automatic Fly Ash Brick MachinesSemi Automatic Fly Ash Brick MachinesInterlocking Paver Block MachinesCLC Block Making Machines ( Cellular Light Weight Concrete )Laying MachinesPaver Block Table Vibrators

AHP Machines is an Achieve Hydraulics group company specialized in producing various kinds of Fly Ash Brick machines, Paving Block Machines, CLC ( Cellular Light Weight Concrete) Machines, Cellular Light Weight Concrete Machines - CLC Machines, Autoclave Aerated Concrete ( AAC ), Laying Machines, Table Vibrators. We are Manufacturer, Exporter, Supplier & known for performance, innovative and economical production technologies and high reliability.