The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable tomore...
SINGLE GANG THREE GANG SIX GANG Consists of : Loading Unit, maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter- balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. Consolidatimore...
SPECIFICATIONS : Model 1922 1924 1926 No. of Jar 2 4 6 Speed range 25 to 200rpm Pre-set programs 2 Timer 0 to 99minutes Controls Keypad Touch sensitive Digital Display LED Power 230V, 50Hz, 100W Etc.
FEATURES Accepts two, four & six samples Digital indication of speed and time Two pre-set programs Built in illumination for easy viewing of samples FLOCCULATIONJAR TEST APPARATUS, MODEL 1922, 1924, 1926 is a flocculation (jar) tests on water and effluent samples. A digital displmore...
Optional Accessories : : CONCRETE SCOOP. FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE
Description and specifications : The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle. Etc
Introduction he oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is amore...
SPECIFICATIONS : Display 3 digit bright red seven segment LED display Accuracy ± 1 revolution Resolution 1 revolution Range 0-999 revolutions No. of drums Model 902 – 2 No. Model 903 – 1 No. Operating Temp. Range 10º-50º C Power 230 V ± 10%, 50 Hz. AC Etc.
Seven segment LED display Sturdy motor to drive drums at constant speed Digital Friability Test Apparatus is a precision instrument suitable for measuring obression strength of tablets. The unit is equipped with two transparent acrylic drums which rotate at a speed of 25 ± 1 rpmmore...
Digital Consolidation Test Apparatus with Data Logger maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter- balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. Consolidation celmore...
We hold expertise in offering marshall stability test apparatus that is used for widely used for designing and evaluating bituminous paving mixes. The marshall stability test apparatus offered by us, can be availed at market leading prices. the apparatus consist of the following more...
We are offering adhesiveness test apparatus. The company has carved a niche, as one of the prime adhesiveness test apparatus manufacturers based in india. Owing to their superior quality and reliable performance, our adhesiveness test apparatuses are high on demand among the cliemore...
This apparatus is used to determine Softening point of Bitumen. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia steel ball, drops a specified distance when heated under specified conditions. more...
the oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable tomore...
We are offering cathodic disbonding test apparatus. “nova” cd test apparatus - cathodic disbonding tester is precise instrument designed to evaluate the characteristics of insulating coating applied over material. From the ancient time environment has made metal structure fromore...
RESOLUTION : 0.1 DEG.C. WITH DIGITAL TEMP.INDICATOR CUM CONTROLLER – MICRO CONTROL BASED AND STIRRING UNIT.
HEATING LOAD : 1 KW/1.5 KW
Temperature Range : AMBIENT TO 99 DEG.C.
INTRODUCTION : The equipment is used for determining the susceptibility of polyolefin plastics to environmental stress cracking when subjected to certain conditions. In this method, the artificially stressed specimen (bent) are subjected to surface active agents. The apparatus comore...
Introduction The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is more...
Introduction Used for tablets to determine the durability at the time of production. A transparent plastic persperx drum with cover also a shaped radial fixed blade which carries the tablets alongwith it upto the central height and lets them off while the drum is rotating, thus tmore...
Microprocessor based Tablet Disintegration Machine is used for testing the disintegration time for tablets, capsules, and other solid dosage forms. Tablet Disintegration Machine is designed to meet the specifications of USPIPBP pharmacopoeia. Acrylic Tank is placed on the platformore...
Acrylic Tank is placed on the platform. A square shaped immersion Heater is also fitted to this acrylic water bath. Two 1000 cc capacity beakers supplied with the equipment are filled with water and placed on the stand in the water tank. The water in the waterbath is maintained amore...
Temperature resolution : 0.1oC, Timer range : 1 min to 99 hrs, 59 min and 59 sec, Display : 6 digit LED 1 digit for step no. 1 to 6 4 digit for displaying time, Sample interval : 6, Bath : 6 mm thick clear acrylic water bath, Bath size : 31 x 16 x 26 cm, Heater :750 watt.more...
Baffle box / material : 45 mm x 45 mm / Stainless Steel
Density cube size : 25.4 0.076 mm
Top funnel with mesh material : 16 mesh, 0.56 mm wire dia, 1.03 mm opening. Baffle material : 4 nos. Glass, Baffle box material : 45 mm x 45 mm Stainless Steel, Bottom funnel : Stainless steel, Density cup – Cylindrical volume : 25.00 0.03 cubic cm, Density cup – inner diametmore...
Complies to all current USP, EP and other pharmacopoeia, Supports 2 test baskets & Quick release basket design, Compact, user-friendly operation, Connectivity with PC -Compatible keyboard for feeding product information, Selectable type of Disintegration: normal basket suppositormore...
We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Bemore...
Dynamic Cone Penetration Test Apparatus (AIM 134) Ref Std : IS 4968 (Part I) For determining the resistance of different types of soil strata to dynamic penetration of a 50 mm cone and thereby obtain an indication regarding their relative strength or density or both. The methomore...
California Bearing Ratio Test Apparatus, Field Type (AIM 155) This apparatus, mounted on a rolled steel joist cantilevered from the back of the truck or fitted to the underside of a mobile frame, can be used to determine the bearing ratio (generally known as the California Beamore...
Slump Test Apparatus ( AIM 334) Ref Stds :IS:7320, BS:1881, ASTM C 143, AASHTO T119 The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in four layers. The top of he concrete is levelled off with the top of the slump cone, he cone is liftmore...
The OPACITY TEST APPARATUS used to measure the % of Light transmission from uPVC Pipe or similar Plastics Components, through vast experienced professionals Kant Plastology designed and manufacturing an exclusive range of OPACITY TEST APPARATUS with amendments by B.I.S. departmenmore...
EMISSION FLOW VARIATION TEST APPARATUS is widely used to determine the Emission flow rate of Emitters and Emitting pipe. Kant Plastology feel immensely pleased to offer an exclusive gamut of EMISSION FLOW VARIATION TEST APPARATUS. This apparatus is manufactured by utilizing optimmore...
Backed by a team of highly skilled engineers, Kant Plastology engaged in providing a wide range of VICAT SOFTENING POINT APPARATUS. The compact and elegant look of apparatus contains high efficient S.S. 304 tubular heating system for appropriate rate of rise of heat and stirrer mmore...
Used to determine the relevant proportions of clay-like or Plastic fines and dust in granular soils & fine aggregate Consists of: Acrylic graduated cylinder (4 nos.) Rubber stopper for cylinder (4 nos.) Graduated Steel rule 450 mm Funnel 100 mm plastic Aspirator bottle 5 lts plasmore...
Soil compaction is a fundamental requirement for the construction of earth fill for dams, reservoirs, canal embankments, highways, railways and runways. The relationship between soil moisture content and compacted dry density is very useful for deciding construction specificationmore...
The separation of modifier and bitumen during Hot storage and cold static condition is evaluated by comparing the ring and ball softening point of the top and bottom samples taken from a conditioned, sealed tube of polymer modified bitumen. The conditioning consist of placing a smore...
ESCR Test Apparatus: Environmental stress cracking is a property that is highly dependent upon the nature and level of stress applied and on the thermal history of specimen. This taste is normally employed for routine inspection purpose. more...