Capacities : From 0.1 million kcal/hr to 10.0 million kcal/hr
Temperature: : Up to 350°C
Firing fuels: : Heavy oils, light oils and gases
The DELTAPAC series, horizontal three pass thermic fluid/thermal oil heater is designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows high prmore...
J.D.Engineers offers 3-Pass Wet-Back Jacketed type Thermic Fluid Heaters heavy oil, light oil, gas and other fuels, etc without compromising on performance. Our heaters are available in Dual Fuel oil & gas firing versions so that you get the advantage of economically available fumore...
J.D.Engineers is a leading manufacturer of Thermic fluid heater in Multi Fuel Fired Units. Picture attached is of J.D.Engineers design of vertical 4-Pass Thermic Fluid heaters with Helical Coil inter Connected with furnace, Top Duct, Convective Coil attached with 2-Pass APH Unmore...
this system is forced circulation fully automatic thermic fluid heater where thermic fluid is circulated in a closed loop through heater and user equipment circuit where the heat is dissipated to process. The same thermic fluid is re-circulated through heater for heating. The themore...
The new vertical four pass thermic fluid heater is suitable for Process industries in rapidly changing and undependable energy situations. It gives you an assurance for rated output on any solid fuel like coal, Lignite, wood, husk, bagasse etc. more...
This system is forced circulation fully automatic thermic fluid heater where thermic fluid is circulated in a closed loop through heater and user equipment circuit where the heat is dissipated to process. The same thermic fluid is re-circulated through heater for heating. The themore...
Features : Fully automatic operation, Larger heating surface enables high thermal efficiency, Clean and smokeless combustion, Noise less operation, No explosion hazards
Our Gas Fired Thermic Fluid Heaters are built to last long. We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. Customers are free to place small as well as bulkmore...
The Wood Fired Thermic Fluid Heater, which we supply, is known for its robust and precise construction and high durability. Substances that are used for the production of different types of goods are named as raw materials. We source these materials only from the trustworthy vendmore...
The 3 Pass Thermic Fluid Heater, which we supply, is known for its make and long service life. Raw material that we source is unprocessed and of excellent quality as we procure it from the trusted sources of the market. Before obtaining it, our experts check it thoroughly. Rely omore...
We expertise in manufacture and supply of Wood or Coal Fired Horizontal Thermic Fluid Heater that are known for high performance and durability. These heaters have an external furnace where fuel is burned and the heater assembly consists of a nest of concentric helical tube coilsmore...
Capacity : 4,00,000 Kcals/hr to 80,00,000 Kcals/hr
Temperature : 300-350°C
We offer to our clients a precision engineered range of Thermic Fluid Heater that are corrosion resistant and are easy to handle. We are recognized for supplying excellent thermic fluid heaters with best features and designs & effective price range with different fuel like CoalWomore...
We are a recognized name catering to the customers by offering different products from Rajkot(India). Carrying out systematic quality process at every stage, we keep our quality standards high to gain customers' satisfaction. more...
Automatic Mechanised screw fuel feeding makes fuel feeding OFF & ON when set temperature is achieved & reduced, respectively.Micro Processor Based VF fuel feed drive is used to adjust the rate of fuel feeding as per Plant load requirement. Most of the Solid Fuels, including Crushmore...
Capacity: : 4 Lacs K-cal/hour to 30 Lacs K-cal/hour
Supply Type : Manufacturer
Maximum Temp: : 300° C
Salient Features: 4 Pass Design ensures better heat utilisation & Ash separation. With Fluidised Bed Combustion furnace design, very high Thermal Efficiency of 80%+-2% can be achieved. Automatic Mechanised screw fuel feeding makes fuel feeding OFF & ON when set temperature is achmore...
Our oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil . more...
Our oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil … more...
Our oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil fired hemore...
"Multitech Engineers" introduce new vertical four pass THERMIC FLUID HEATER is suited for Indian industries in rapidly changing and undependable energy situations. The vertical design coupled with intergal furnace gives you an assurance of a rated output on any solid fuel lmore...
Thermotech” : Thermic Fluid Heater’s are available in Horizontal & Vertical Models where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel. Thermic Fluid Heater Capacity = 0.1 MKcal/hr to more...
We are highly specialized in manufacturing, exporting and supplying a qualitative assortment of thermic fluid heater. It is an operation to transfer heat by the fluids under the well suitable temperature. The provided heater is efficiently manufactured under the stem guidance of more...
we are offering husk fired thermic fluid heater. fostered with long term of industry experience and understanding, we are actively engaged in manufacturing, exporting and supplying a broad array of husk fired thermic fluid heater. our technical experts manufacture this heater witmore...
Product Description : The high performance Aero Therm Thermic fluid heater built with following safeties : » Circulating pump motor interlock. » Low level in expansion tank. » Low fuel oil temperature (F.O. fired only). » 2 Nos. of reassure switch for no flow/lomore...
We have THERMIC FLUID HEATERS which have these following features: OIL FIRED - Light Oil, Heavy Oil STD Models : EX, TK, TKE AH GAS FIRED - LPG, N. Gas, LNG STD Models : EX - G, TK G, TKE AH G SOLID FUEL FIRED : Coal, Wood, Lignite, Husk, Agrowaste, Bagasse etc STD Model : CL, CXmore...