Product / Services
Post Buy Requirement
Agnee Transmissions (i) Pvt. Ltd.

Agnee Transmissions (i) Pvt. Ltd.
Indraprastha Industrial Area, Kota, Rajasthan

Write a Review
Call Now Call Now

Our Products

  1. Gearboxes 14 Products available
  2. Gearbox & Gear Parts 6 Products available

  3. Geared Motor

    2 Products available

  4. Hoists

    1 Products available

  5. Electric Motors

    1 Products available
  6. Others Products 1 Products available

Gearbox & Gear Parts

Our offered Product range includes Helical Gears, Worm Shafts, Industrial Gears, Spur Gears and Shaft Mounted Helical Speed Reducers.

Helical Gears

Helical Gears
  • Min. Order (MOQ) 1 Set(s)
Helical Gears and PinionsUpto 20 Module/1.5 D.P. Outer Diameter Upto 1250 mm/50" in Helical gears and PinionsFace Widths upto 800 mm/31" Required information for quotation: Material of Construction - steel, EN 8, EN 24, EN 353, SAE 8620 etcTeeth Specification - pitch in Module or DP, Helix AngleOuter DiameterBore sizeKey way sizeHub size if anyAny other requirement
View Complete Details
Ask Latest Price & Details
Worm Shafts

Worm Shafts
  • Min. Order (MOQ) 1 Piece(s)
Upto 10 Module/3 D.P. Outer Diameter Upto 300 mm/12" Face Widths upto 500 mm/19" In Single or multi starts Center Distance from 25mm/1" to 500mm/20" Generally Worm Shafts are made from EN 353, Case Carburised, Hardened and Tempered upto 55-60 HRC. They are then accurately ground. Tooth Flank are ground on Worm Profile Grinder Also offered in other metals with or without hardening like in Mild Steel, EN8, EN 19, EN 24, Cast Iron or as specified standard and custom made as per Specifications, Drawing or Sample Worm shafts like for Worm Gear Boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-Stock (Subject to conformation). For Automobiles and Industrial uses Worm Shaft and Worm Wheel Pairs are suitable for power transmission in right angle Reverse engineering of Gear sets and Gear Boxes
View Complete Details
Ask Latest Price & Details
industrial gears

Industrial Gears
  • Min. Order (MOQ) 1 Piece(s)
upto 10 Module/2.5 DPOuter Diameter upto 540 mm/21"Face Widths upto 200 mm/8"Pinions are generally made from EN 353 case Hardening Steel and Gears are generally made from SAE 8620 Case Hardening Steel. Other metals like 20Mn5Cr5, EN 36 or EN 24, EN 19 full hardening steel can be taken for good quantitiesThey are case carburised, Hardened and Tempered to HRC 55-60.They are then accurately ground. Teeth Flanks are ground on Teeth Profile Grinding Machinefor Automobiles and IndustriesCustom made as per Specifications, Drawing or Sample
View Complete Details
Ask Latest Price & Details
Spur Gears

Spur Gears
  • Min. Order (MOQ) 1 Set(s)
Upto 20 Module/1.5 D.P. Outer Diameter Upto 2500 mm/100" in spur gear and Pinion Required information for quotation: Material of Construction - steel, EN 8, EN 24, EN 353, SAE 8620 etcTeeth Specification - pitch in Module or DP, Helix AngleOuter DiameterBore sizeKey way sizeHub size if anyAny other requirement
View Complete Details
Ask Latest Price & Details
Shaft Mounted Helical Speed Reducers

Shaft Mounted Helical Speed Reducers
  • Min. Order (MOQ) 1 Set(s)
Model in 7 sizes from B to H with nominal gear ratios of 5:1, 13:1 and 20:1 Extended 2 year warranty (optional). Mounts direct onto the driven shaft:No alignment problems.No shaft couplings.Flexible motor mounted in a convenient position. No expensive adjustable base plate is required for the motor, as V-Belt tensioning is done by the use of a torque arm which can be simply shortened or extended to swing the shaft mounted speed reducer about its output hub to tension the 'V' -Belts. Quick and easy speed changing via belt drive. Final output speed can be very accurately obtained by adjusting the 'V' -Belt' drive ratio. High efficiency by using helical gearso Single - 98% efficiency.o Double - 96% efficiency.Anti-run back device can easily be fitted on site. Most shaft mounted speed reducers use "6000" series I. S. O. plan Taper Roller Bearings, stocked around the world. Double lip type oil seals used throughout. Shaft Mount Gear boxes can be mounted in any position. Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction industry. Long established and proven drive system. Wide range of variation available:Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. Ultra compact when compared to other designs. AGNEE offers a full comprehensive repair facility including spares availability
View Complete Details
Ask Latest Price & Details
Worm Gears

Worm Gears
  • Min. Order (MOQ) 1 Set(s)
Upto 20 Module/1.5 D.P. Outer Diameter Upto 2100mm/80" Face Widths upto 800 mm/31" In Single or multi starts Center Distance from 25mm/1" to 500mm/20" In Cast Iron, Bronze (PB2S), or as specified Optionally available Custom made as per Specifications, Drawing or Sample Worm Gears are available on very tight delivery schedules, some Worm Wheel & Worm shafts Pairs like for Worm Gear Boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ready-Stock. Other ratios are also available within One day of placing Order or on short notice (subject to conformation). Gear Box Overhauling and Rebuilding Services.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Retailer of Gearbox & Gear Parts from Kota, Rajasthan by Agnee Transmissions (i) Pvt. Ltd.
Product / Services
Post Buy Requirement
Agnee Transmissions (i) Pvt. Ltd.

Agnee Transmissions (i) Pvt. Ltd.
Indraprastha Industrial Area, Kota, Rajasthan

Write a Review
Call Now Call Now

Our Products

  1. Gearboxes 14 Products available
  2. Gearbox & Gear Parts 6 Products available

  3. Geared Motor

    2 Products available

  4. Hoists

    1 Products available

  5. Electric Motors

    1 Products available
  6. Others Products 1 Products available

Gearbox & Gear Parts

We offer a complete product range of Helical Gears, Worm Shafts, Industrial Gears, Spur Gears and Shaft Mounted Helical Speed Reducers

Helical Gears

Helical Gears
  • Min. Order (MOQ) 1 Set(s)
Helical Gears and PinionsUpto 20 Module/1.5 D.P. Outer Diameter Upto 1250 mm/50" in Helical gears and PinionsFace Widths upto 800 mm/31" Required information for quotation: Material of Construction - steel, EN 8, EN 24, EN 353, SAE 8620 etcTeeth Specification - pitch in Module or DP, Helix AngleOuter DiameterBore sizeKey way sizeHub size if anyAny other requirement
View Complete Details
Ask Latest Price & Details
Worm Shafts

Worm Shafts
  • Min. Order (MOQ) 1 Piece(s)
Upto 10 Module/3 D.P. Outer Diameter Upto 300 mm/12" Face Widths upto 500 mm/19" In Single or multi starts Center Distance from 25mm/1" to 500mm/20" Generally Worm Shafts are made from EN 353, Case Carburised, Hardened and Tempered upto 55-60 HRC. They are then accurately ground. Tooth Flank are ground on Worm Profile Grinder Also offered in other metals with or without hardening like in Mild Steel, EN8, EN 19, EN 24, Cast Iron or as specified standard and custom made as per Specifications, Drawing or Sample Worm shafts like for Worm Gear Boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-Stock (Subject to conformation). For Automobiles and Industrial uses Worm Shaft and Worm Wheel Pairs are suitable for power transmission in right angle Reverse engineering of Gear sets and Gear Boxes
View Complete Details
Ask Latest Price & Details
industrial gears

Industrial Gears
  • Min. Order (MOQ) 1 Piece(s)
upto 10 Module/2.5 DPOuter Diameter upto 540 mm/21"Face Widths upto 200 mm/8"Pinions are generally made from EN 353 case Hardening Steel and Gears are generally made from SAE 8620 Case Hardening Steel. Other metals like 20Mn5Cr5, EN 36 or EN 24, EN 19 full hardening steel can be taken for good quantitiesThey are case carburised, Hardened and Tempered to HRC 55-60.They are then accurately ground. Teeth Flanks are ground on Teeth Profile Grinding Machinefor Automobiles and IndustriesCustom made as per Specifications, Drawing or Sample
View Complete Details
Ask Latest Price & Details
Spur Gears

Spur Gears
  • Min. Order (MOQ) 1 Set(s)
Upto 20 Module/1.5 D.P. Outer Diameter Upto 2500 mm/100" in spur gear and Pinion Required information for quotation: Material of Construction - steel, EN 8, EN 24, EN 353, SAE 8620 etcTeeth Specification - pitch in Module or DP, Helix AngleOuter DiameterBore sizeKey way sizeHub size if anyAny other requirement
View Complete Details
Ask Latest Price & Details
Shaft Mounted Helical Speed Reducers

Shaft Mounted Helical Speed Reducers
  • Min. Order (MOQ) 1 Set(s)
Model in 7 sizes from B to H with nominal gear ratios of 5:1, 13:1 and 20:1 Extended 2 year warranty (optional). Mounts direct onto the driven shaft:No alignment problems.No shaft couplings.Flexible motor mounted in a convenient position. No expensive adjustable base plate is required for the motor, as V-Belt tensioning is done by the use of a torque arm which can be simply shortened or extended to swing the shaft mounted speed reducer about its output hub to tension the 'V' -Belts. Quick and easy speed changing via belt drive. Final output speed can be very accurately obtained by adjusting the 'V' -Belt' drive ratio. High efficiency by using helical gearso Single - 98% efficiency.o Double - 96% efficiency.Anti-run back device can easily be fitted on site. Most shaft mounted speed reducers use "6000" series I. S. O. plan Taper Roller Bearings, stocked around the world. Double lip type oil seals used throughout. Shaft Mount Gear boxes can be mounted in any position. Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction industry. Long established and proven drive system. Wide range of variation available:Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. Ultra compact when compared to other designs. AGNEE offers a full comprehensive repair facility including spares availability
View Complete Details
Ask Latest Price & Details
Worm Gears

Worm Gears
  • Min. Order (MOQ) 1 Set(s)
Upto 20 Module/1.5 D.P. Outer Diameter Upto 2100mm/80" Face Widths upto 800 mm/31" In Single or multi starts Center Distance from 25mm/1" to 500mm/20" In Cast Iron, Bronze (PB2S), or as specified Optionally available Custom made as per Specifications, Drawing or Sample Worm Gears are available on very tight delivery schedules, some Worm Wheel & Worm shafts Pairs like for Worm Gear Boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ready-Stock. Other ratios are also available within One day of placing Order or on short notice (subject to conformation). Gear Box Overhauling and Rebuilding Services.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.