Agharia Electricals Pvt. Ltd.

Kanodar, Banaskantha, Gujarat

OUR PRODUCT RANGE IN SUBMERSIBLE MOTORS AND PUMP SETS1. 4 Inch Submersible Motor Water Lubricate Rewindable with Cast Iron or Stainless steel Parts.a. 1 Phase 220110 Volts, 60 Hz, 1 HP to 5 HP.b. 1 Phase 220 Volts, 50 Hz, 1 HP to 5 HP.c. 3 Phase 220380 Volts, 60 Hz, 1 HP to 7.5 HP.d. 3 Phase 380415 Volts, 50 Hz, 1 HP to 7.5 HP.2. 6 Inch Submersible Motor Water Lubricate Rewindable with Cast Iron or Stainless Steel Parts, Like Franklin, Subtek, KSB and Other International type.a. 3 Phase 220380 Volts, 60 Hz, 4 HP to 50 HP.b. 3 Phase 380415 Volts, 50 Hz, 4 HP to 50 HP.3. 8 Inch Submersible Motor Water Lubricate Rewindable with Cast Iron or Stainless Steel Parts, Like Franklin, Subtek, KSB and Other International type.a. 3 Phase 220380 Volts, 60 Hz, 10 HP to 125 HP.b. 3 Phase 380415 Volts, 50 Hz, 10 HP to 125 HP.4. 4 Inch Pump with S.S. Casing and Cast Iron Top Bottom, Noryl Glass field, poly carbonate Impeller and Diffuser SP 2, 4, 5, 7, 10, 12, 18.5. 6 Inch Pump with S.S. Casting Impeller and cast iron Bowl, Top Bottom Accessories Mix Flow and Redial flow.6. 6 Inch Pump With S.S.304 Foundry Casting Bowl Impeller and Top Bottom Accessories, Mix Flow and Radial Flow.7. 8 Inch Pump with S.S. Impeller and Cast Iron Bowl, top bottom Accessories.8. 8 Inch Pump with S.S. 304 Foundry Casting Bowl Impeller and top Bottom Accessories, Mix Flow and radial flow.9. Portable sewage pump up to 2 HP, 13 Phase, 6050 Hz.10. Horizontal Submersible Hi Lifter Pumps to lift water from under ground tank, canal, Open well, fountain, Hi rise Building etc.

stainlesssteel submersible pump& motor

We are Offering Submersible Pump, S S Pumps Motors.

We are offering submersible pumps.Product advantages and specificationsuction, stage casing and discharge outlet in cast iron and also available in stainless steel on request. Impeller available in ss410 ss304 ss316 for radial and mixed flow. Sleeves are of ss410 reinforced with chromium to increase wear resistance against sand. Pump shaft in ss410. Bush for shaft guide in antifriction rubber for high antiwear resistance. Non return valve (nrv) of ss304. Cable guard and strainer in stainless steel. Pump-motor connection according to nema standard available minimum level of water on immersion is 1 metre. 6 and 8 motor connection available. Complete stainless steel pump available on request. Operating range: head range : 11 mtr to 282 mtr. Flow rate : 200 lpm to 3500 lpm. Immersion : 1 mtr. Minimum.li> minimum level sand content: 50gmm3. Application: these pumps are for domestic, agriculture & industrial usage

Product Advantages and Specification

• LEADER 4 multistage pumps with new hydraulic design offers high level of performance, mechanically build to last long and provide un-interrupted service.
• Suction and discharge outlets are made of Cast Iron with nickel coating. Also available in Stainless Steel on request.
• Carefully designed impeller and bowl are made of resin impregnated thermoplastic. This material ensures high performance and longer life cycle of pump.
• Pump casing in SS202 /SS304.
• Pump shaft in SS410.
• Hex rubber bush and Stainless Steel Sleeve with hard chrome increase the wear resistance of this pump against sand.
• Efficiently designed check valve guarantees trouble free service. even in most critical application.
• Cable guard and strainer in stainless steel.
• Pumps available in radial and mixed flow designs.
• Pump-Motor connection according to NEMA standard.Available
• Operating range:
  • Head range : 6 mtr. to 280 mtr.
  • Flow rate : l0 lpm to 500 lpm.
  • Immersion : 1 mtr. Minimum.
• Minimum level sand content: 50gm/m3.
• Application: These pumps are for domestic, agriculture & industrial usage

4 " Submersible Motors (WATERFIELD)

4 LEADER motors are excellence in engineering & high efficiency electrical design ensures maintenance free long life in most critical applications and are available in single and three phase models.

• 4 LEADER Water Lubricated Motors are rewindable
• Upper / Lower bracket and motor base are cast iron/SS 410
• Motor shaft is of SS 420 grade or above
• Stator shell is of SS 202 /304
• Winding wire poly propylene with insulation Class-B
• Flange and shaft protrusion as per NEMA standard AVAILABLE
• Degree of protection: lP 68
• Max water temperature: 50C
• Start/H: Max 30
• Allowable voltage variation: +6%/-10%
• Max depth immersion: 250m
• Mounting : vertical / horizontal
• Single phase motors are capacitor start capacitor run
• Motor cable length: 3m / 3 core

Versions

• Single Phase 0.25 kW to 2.2 kW, 220-230 Volt / 50Hz
• Three Phase 0.55 kW to 5.5 kW, 380-400 Volt /50 Hz
• Other voltage and frequencies are also available on demand