Our Products
Compression Springs & Air Springs
2 Products availableBolts
2 Products availableHand Tool
2 Products availableCutting Machine
1 Products availableVacuum Cleaner
1 Products availableWindow Hinges
1 Products availableOur product range contains a wide range of Stainless Steel Fasteners, RAIL COACH FASTENERS, Anchor Fasteners, High Tensile Fasteners and fisher fasteners
Fasteners made of stainless steel have become increasingly popular due to their inherent corrosion resistive properties. Their anti corrosive properties are directly attributed to the higher levels of Nickel and Chromium in the metal.
AISI Grades 202, 304 and 316 are the more commonly used material grades.
Stainless steel of grade 202 contains nickel of 5% and chromium of 18% and is the cheapest of the three grades. Fasteners of this grade are generally used for low budget uses and/or where the mating components are also not of a higher grade.
Stainless steel of grade 304 contains nickel of 8% and chromium of 18% and is the most commonly used grade for the production of fasteners. It possesses an excellent combination of strength, corrosion resistance and fabricability. Fasteners of this grade are being extensively used today in almost every industry.
Grade 316 contains Nickel of 10% and chromium of 16% added with 2% molybdenum which gives the metal very high anti corrosive properties. Fasteners of this grade are used mostly in the chemical and marine industry.
All kinds of fasteners are available in the above grades. The different types and their size range are summarized below.
Fastener |
Standards |
Grades Available |
Size Range (Metric threads) |
Size Range (BSW threads) |
||
From |
To |
From |
To |
|||
Hexagonal Bolts (Fully threaded screws)
|
IS 1363/DIN 933/BS 1083 |
202, 304 & 316 |
M3 x 10 (in 304) M6 x 10 (in 202 & 316) |
M24 x 300 |
3/16” x 1/2” |
3/4” x 8” |
Hexagonal Full and Lock Nuts
|
IS 1363/ DIN 934/439/ BS 1083 |
202, 304 & 316 |
M2 |
M36 |
1/8” |
1” |
Plain Washers
|
IS 2016 |
202, 304 & 316 |
M3 |
M36 |
1/8” |
1” |
Spring Washers (Square and Flat sections)
|
IS 3063 |
202, 304 & 316 |
M3 |
M36 |
1/8” |
1” |
Slotted Machine Screws (with CSk, Cheese, Round and Raised CSK heads)
|
IS 1365/1366/8911 DIN 963/84 BS 450 |
202 & 304 |
M2 x 4 |
M12 x 100 |
1/8” x 1/4” |
1/2” x 4” |
Cross Recessed Machine Screws with Pan and CSK Phillips heads (PPH & CPH) |
DIN 7965/965 |
304 |
M2 x 4 |
M6 x 50 |
- |
- |
Allen Cap Screws
|
IS 2269/DIN 912 BS 2470 |
202, 304 & 316 |
M3 x 6 |
M20 X 100 |
3/16” x 1/2” |
5/8” X 4” |
Allen CSK Screws
|
IS 6761/ DIN 7991 BS 2470 |
202 & 304 |
M3 x 8 |
M12 x 100 |
3/16” X 1/2” |
1/2” X 4” |
Grub Screws
|
IS 6094/ DIN 916/ BS 2470 |
304 |
M3 x 3 |
M12 x 50 |
3/16” x 3/16” |
1/2” X 2” |
Button Head Screws
|
ISO 7380 |
304 |
M3 x 8 |
M10 X 60 |
- |
- |
Slotted Self Tapping Screws (with PAN & CSK heads)
|
IS 7173/7170 DIN 7971/7972 |
202 & 304 |
No. 4 x 6.5 |
No. 14 x 50 |
- |
- |
Cross Recessed Self Tapping screws (with Pan & CSK Phillips heads)
|
DIN 7981/7982 |
202 & 304 |
No. 4 x 6.5 |
No. 14 x 50 |
- |
- |
Wood Screws
|
IS 6760/DIN 97 |
202 & 304 |
No. 6 x 20 |
No. 12 x 100 |
- |
- |
Self Locking Nuts (Nylock Nuts)
|
IS 7002/DIN 982 |
304 & 316 |
M3 |
M20 |
3/16” |
1” |
Square Nuts |
IS 2585/DIN 557 |
304 |
M5 |
M12 |
- |
- |
Wing Nuts
|
IS 2636/ DIN 315 |
202 & 304 |
M3 |
M12 |
- |
- |
Dom Nuts
|
DIN 1587 |
304 & 316 |
M3 |
M24 |
3/16” |
1” |
Flange Nut and Weld Nuts
|
DIN 6923/6927/929 |
304 |
M6 |
M12 |
- |
- |
Special Hex Nuts
|
UNI 5587 |
304 |
M6 X 6 |
M12 X 12 |
- |
- |
Heavy Hex Nuts
|
ANSI B18.2.2 |
304 & 316 |
3/8” |
1” |
||
Star Washers (Multigrip overlapping)
|
- |
304 |
M6 |
M10 |
- |
- |
Star Washers (ET & IT)
|
- |
304 |
M3 |
M16 |
- |
- |
Taper Washers
|
- |
304 |
M6 |
M16 |
- |
- |
Threaded Rod
|
- |
304 & 316 |
M5 |
M36 |
3/16” |
1” |
Rivets (Round, Flat and CSK heads)
|
IS 2609 |
202, 304 & 316 |
3mm x 10mm |
- |
- |
|
POP (BLIND) RIVETS and Nuts
|
304 |
|||||
Anchor fasteners (Pin Type)
|
- |
202 & 304 |
M6 x 50 |
M24 x 200 |
- |
- |
Besides the standard Nuts, Bolts, Screws, Pins, Rivets and Studs conforming to the relevant Indian Standard, our supplies to the various Railway departments have included many, specially made to order. products as per Railway drawings specially suited for use in Railway coaches and on rail tracks. We are an ICF approved source for their supply.
Some of these items are listed below;
Expansion fasteners are being extensively used nowadays as a quick fastening solution in concrete and brick surfaces.
Types used vary according to nature of work, budget and convenience. The types dealt in by us and the available size range is given below.
TYPE |
AVAILABLE MODELS |
SIZE RANGE FROM TO |
GENERALLY USED IN |
|
RAWL TYPE |
BOLT , PROJ, Open J hook and Closed “Eye” hook |
M6 |
M20 |
|
WEDGE ANCHORS |
DOUBLE RING (YELLOW) and SINGLE RING (WHITE) |
M8 X 75 |
M24 X 300 |
|
PIN (ZEBRA) TYPE |
In M.S. and S.S |
M6 x 50 |
M39 x 200 |
|
FISHER TYPE |
Bolt, J Hook and Eye Hook |
M6 |
M10 |
|
THREADED SHIELD (DROP IN ANCHOR) |
BULLET TYPE |
M6 |
M16 |
|
MILD STEEL WEDGE TYPE (PIPE TYPE) |
Bolt, Proj, J hook and Eye Hook |
M6 |
M10 |
|
WALL PLUGS |
25MM |
65MM |
|
|
HAMMER FIX SCREWS |
M6 X 50 |
M10 X 160 |
|