Cable jointing boxes and busbars are to be filled with a suitable insulating material. Bitumen base filling compounds are ideal materials for cable jointing boxes, filling, impregnating and manufacture of insulating tapes.

The compound has the highest degree of electrical insulation. When heated it can be poured and once it cools, it forms a hard mass. The compound has low water vapors permeability, it is insoluble in water and subsoil chemicals. hence it gives a high performance for electrical application as it offers resistance to weathering and to chemical reactions. The compound remains stable and it neither froths nor emits excessive fumes when heated to a temperature of 80degreeC above the softening point. Where ever the compound is used, the life is prolonged of metals like copper, brass, iron, lead or aluminum, zinc, galvanized steel and their alloys because of the protective nature of the compound.

Uses:

• As insulator for filing cable jointing boxes of both electricity and telecommunication, even if they are operating at high temperatures
• As a protector of moisture, water, and other environmental chemicals so as to avoid failure in the system and hazards to human life
• As impregnating material for the manufacture of insulation tapes.

A 'Ready to use' waterproofing compound formulated out of the special grade of oxidized bitumen, carefully blended and compounded with fibrous and inert mineral fillers and volatile solvents to keep it plastic.

It remains plastic for a considerable length of time. Although the skin and eventually the interior hardens to some extent after application, a little further change takes place after a certain elastic limit is reached. It is therefore ideal under conditions where a degree of expansion, contraction, and vibration is expected.

Bituplast can be applied even by unskilled labor after a little practice. It does not create or flow when applied on a vertical or sloping surface. it adheres firmly to most surfaces. it is ideal for sealing of cracks, crevices on the roofing decks, walls, window skills and virtually all nooks and corners where accessibility of other standard methods are generally difficult.

Uses:

• Stopping leaks and waterproofing of porous masonry and cracked concrete
• It serves as a caulking agent for crevices for virtual joints between steel plates, folded sections, wooden joints, precast concrete, cladding, block etc.
• Waterproofing and caulking in railway coaches
• Protection of buried structures or vessels, such as underground steel tanks, poles
• Protection of cooling towers and other installations where they require protection from water.

Cable jointing boxes and busbars are to be filled with a suitable insulating material. Bitumen base filling compounds are ideal materials for cable jointing boxes, filling, impregnating and manufacture of insulating tapes.The compound has highest degree of electrical insulation. When heated it can be poured and once it cools, it forms into a hard mass. The compound has low water vapours permeability, it is insoluable in water and subsoil chemicals. hence it gives a high performance for electrical application as it offers resistance to weathering and to chemical reactions. The compund remains stable and it neither froths nor emits excessive fumes when heated to a temperature of 80degreeC above the softening point. Where ever the compound is used, the life is prolonged of metals like copper, brass, iron, lead or aluminium, zinc, galvanized steel and their alloys because of the protective nature of compound.

Cable jointing boxes and busbars are to be filled with a suitable insulating material. Bitumen base filling compounds are ideal materials for cable jointing boxes, filling, impregnating and manufacture of insulating tapes.

The compound has the highest degree of electrical insulation. When heated it can be poured and once it cools, it forms a hard mass. The compound has low water vapors permeability, it is insoluble in water and subsoil chemicals. hence it gives a high performance for electrical application as it offers resistance to weathering and to chemical reactions. The compound remains stable and it neither froths nor emits excessive fumes when heated to a temperature of 80degreeC above the softening point. Where ever the compound is used, the life is prolonged of metals like copper, brass, iron, lead or aluminum, zinc, galvanized steel and their alloys because of the protective nature of the compound.

Uses:

• As insulator for filing cable jointing boxes of both electricity and telecommunication, even if they are operating at high temperatures
• As a protector of moisture, water, and other environmental chemicals so as to avoid failure in the system and hazards to human life
• As impregnating material for the manufacture of insulation tapes.

A 'Ready to use' waterproofing compound formulated out of the special grade of oxidized bitumen, carefully blended and compounded with fibrous and inert mineral fillers and volatile solvents to keep it plastic.

It remains plastic for a considerable length of time. Although the skin and eventually the interior hardens to some extent after application, a little further change takes place after a certain elastic limit is reached. It is therefore ideal under conditions where a degree of expansion, contraction, and vibration is expected.

Bituplast can be applied even by unskilled labor after a little practice. It does not create or flow when applied on a vertical or sloping surface. it adheres firmly to most surfaces. it is ideal for sealing of cracks, crevices on the roofing decks, walls, window skills and virtually all nooks and corners where accessibility of other standard methods are generally difficult.

Uses:

• Stopping leaks and waterproofing of porous masonry and cracked concrete
• It serves as a caulking agent for crevices for virtual joints between steel plates, folded sections, wooden joints, precast concrete, cladding, block etc.
• Waterproofing and caulking in railway coaches
• Protection of buried structures or vessels, such as underground steel tanks, poles
• Protection of cooling towers and other installations where they require protection from water.

Cable jointing boxes and busbars are to be filled with a suitable insulating material. Bitumen base filling compounds are ideal materials for cable jointing boxes, filling, impregnating and manufacture of insulating tapes.The compound has highest degree of electrical insulation. When heated it can be poured and once it cools, it forms into a hard mass. The compound has low water vapours permeability, it is insoluable in water and subsoil chemicals. hence it gives a high performance for electrical application as it offers resistance to weathering and to chemical reactions. The compund remains stable and it neither froths nor emits excessive fumes when heated to a temperature of 80degreeC above the softening point. Where ever the compound is used, the life is prolonged of metals like copper, brass, iron, lead or aluminium, zinc, galvanized steel and their alloys because of the protective nature of compound.