Force Gauges

Mark-10 Corporation manufactures various types of force gauges depending on their accuracy, sampling rate, and memory.

Series 3 gauges are compact systems and the output provided is USB.

Specifications:

Accuracy: ±0.3% of full scale

Sampling rate: 2000 Hz

Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.

Battery life: Backlight on: up to 7 hours of continuous use, backlight off: Up to 24 hours of continuous use

Measurement units: lbF, gF, kgF, N (depending on model)

USB outputs: Configurable up to 115, 200 baud.

Safe overload: 200% of full scale (display shows “OVER” at 110% and above)

Weight: M3 - 012 - M3 - 100: 0.7 lb [0.33 kg] M3 - 200 - M3-500: 0.9 lb [0.41 kg]

Included items: Carrying case, chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user's guide), NIST-traceable certificate of calibration (data is available for an additional charge)

Warranty: 3 years (see individual statement for further details)

Series 3 would be supplied with a NIST traceable certificate.

Features:

• High-speed 2, 000 Hz sampling rate
• USB data output of continuous or individual data points
• Ultra-compact size
• Large backlit graphic display
• Programmable set points with pass/fail indicators
• Live load bar graph with set point markers
• Peak readings and set points always displayed
• 3 selectable units of measurement
• Configurable audio alarms and key tones

For more, visit https://www.youtube.com/watch?v=KJCSIbbMx5g

Mark-10 Corporation manufactures various types of force gauges varying inaccuracy, sampling rate, and memory.

Series 7 gauges have break detection. The outputs are USB/RS232, Mitytoyo, and analog. The system can also be connected to the computer for continuously monitoring the change in force.

Specifications:

Accuracy: ±0.1% of full scale

Sampling rate: 14000 Hz

Measurement units: lbf - ozf - gf - kgf - N -kN - mN

Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.

Battery Life: Backlight on: up to 7 hours of continuous use, Backlight off: up to 24 hours of continuous use

Measurement units: lbF, ozF, gF, kgF, N, kN, mN

Outputs:
USB / RS-232: Configurable up to 115, 200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control.

Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.

Analog: ±1 VDC, ±0.25% of full scale at capacity,

General purpose: Three open drain outputs, one input.

Set points: Three open drain lines.

Safe overload: 200% of full scale (display shows “OVER” at 110% and above)

Weight: M7-012 - M7-100: 1.0 lb [0.45 kg], M7-200 - M7-500: 1.2 lb [0.54 kg]

Included items: Carrying case with chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user’s guide), and NIST-traceable certificate of calibration with data.

Environmental requirements: 40 - 100°F, max. 96% humidity, non-condensating

Warranty: 3 years (see individual statement for further details)

Features:

• High-speed 14, 000 Hz sampling rate
• Continuous data capture of up to 5, 000 data points, at up to 14, 000 Hz, downloadable to a PC
• Individual data point memory for up to 5, 000 data points, downloadable to a PC
• USB, RS-232, Mitutoyo, and analog outputs
• Sample break detection with auto functions, including stopping movement on the ESM303 test stand
• 1st / 2nd peak detection
• Automatic output / data storage / zeroing upon various event completions
• 5 units of measurement, plus Coefficient of Friction, and user-defined unit with configurable name
• Programmable footswitch command string 
• Programmable set points, with indicators and outputs
• Averaging mode - calculates average readings over time
• External trigger mode - for switch contact testing or remotely stopping display update
• Password protection, configurable for individual keys and calibration

For more, visit https://www.youtube.com/watch?v=OObmXP6OsO4

Series 2 Force gauges are designed for basic tension and compression force testing applications upto 500 lbF (2, 500 N).  The accuracy is 0.5% fs and the sampling rate is 500 Hz.  The measurement units are lbF, kgF & N.

Force Gauges

Mark-10 Corporation manufactures various types of force gauges depending on their accuracy, sampling rate, and memory.

Series 3 gauges are compact systems and the output provided is USB.

Specifications:

Accuracy: ±0.3% of full scale

Sampling rate: 2000 Hz

Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.

Battery life: Backlight on: up to 7 hours of continuous use, backlight off: Up to 24 hours of continuous use

Measurement units: lbF, gF, kgF, N (depending on model)

USB outputs: Configurable up to 115, 200 baud.

Safe overload: 200% of full scale (display shows “OVER” at 110% and above)

Weight: M3 - 012 - M3 - 100: 0.7 lb [0.33 kg] M3 - 200 - M3-500: 0.9 lb [0.41 kg]

Included items: Carrying case, chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user's guide), NIST-traceable certificate of calibration (data is available for an additional charge)

Warranty: 3 years (see individual statement for further details)

Series 3 would be supplied with a NIST traceable certificate.

Features:

• High-speed 2, 000 Hz sampling rate
• USB data output of continuous or individual data points
• Ultra-compact size
• Large backlit graphic display
• Programmable set points with pass/fail indicators
• Live load bar graph with set point markers
• Peak readings and set points always displayed
• 3 selectable units of measurement
• Configurable audio alarms and key tones

For more, visit https://www.youtube.com/watch?v=KJCSIbbMx5g

Mark-10 Corporation manufactures various types of force gauges varying inaccuracy, sampling rate, and memory.

Series 7 gauges have break detection. The outputs are USB/RS232, Mitytoyo, and analog. The system can also be connected to the computer for continuously monitoring the change in force.

Specifications:

Accuracy: ±0.1% of full scale

Sampling rate: 14000 Hz

Measurement units: lbf - ozf - gf - kgf - N -kN - mN

Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.

Battery Life: Backlight on: up to 7 hours of continuous use, Backlight off: up to 24 hours of continuous use

Measurement units: lbF, ozF, gF, kgF, N, kN, mN

Outputs:
USB / RS-232: Configurable up to 115, 200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control.

Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.

Analog: ±1 VDC, ±0.25% of full scale at capacity,

General purpose: Three open drain outputs, one input.

Set points: Three open drain lines.

Safe overload: 200% of full scale (display shows “OVER” at 110% and above)

Weight: M7-012 - M7-100: 1.0 lb [0.45 kg], M7-200 - M7-500: 1.2 lb [0.54 kg]

Included items: Carrying case with chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user’s guide), and NIST-traceable certificate of calibration with data.

Environmental requirements: 40 - 100°F, max. 96% humidity, non-condensating

Warranty: 3 years (see individual statement for further details)

Features:

• High-speed 14, 000 Hz sampling rate
• Continuous data capture of up to 5, 000 data points, at up to 14, 000 Hz, downloadable to a PC
• Individual data point memory for up to 5, 000 data points, downloadable to a PC
• USB, RS-232, Mitutoyo, and analog outputs
• Sample break detection with auto functions, including stopping movement on the ESM303 test stand
• 1st / 2nd peak detection
• Automatic output / data storage / zeroing upon various event completions
• 5 units of measurement, plus Coefficient of Friction, and user-defined unit with configurable name
• Programmable footswitch command string 
• Programmable set points, with indicators and outputs
• Averaging mode - calculates average readings over time
• External trigger mode - for switch contact testing or remotely stopping display update
• Password protection, configurable for individual keys and calibration

For more, visit https://www.youtube.com/watch?v=OObmXP6OsO4

Series 2 Force gauges are designed for basic tension and compression force testing applications upto 500 lbF (2, 500 N).  The accuracy is 0.5% fs and the sampling rate is 500 Hz.  The measurement units are lbF, kgF & N.