Aero Pack Products

Belapur, Navi Mumbai, Maharashtra

It forms a semi-permanent waxy film to protect moulds and dies from corrosions. Excellent for indoor corrosion protection up to 6 months. Coating can be easily removed by use of mild solvents, also melts away when mould is heated. Use PROTECTO 200 - Mould Cleaning Spray for effective cleaning.

It is a multi-purpose maintenance spray that loosens rusted parts, displaces moisture and prevents rust formation. Thoroughly penetrates and lubricates hinges, castors, springs etc. to stop squeaking. It contains water displacing agents and rust inhibitors on metal surfaces. Leaves a protective film to prevent rust formation; hence can be used as temporary rust preventive. Does not damage most painted surfaces.

It is a highly efficient cleaner, mild cleaner for high precision cleaning of electronic components. Its fast evaporating and high di-electric strength makes it an ideal cleaner. It is non-staining and non-corrosive on most plastics and lacquer coatings.

It provides excellent bright and lustrous coat. Restores galvanised surfaces to their original finish. Fast drying and can be easily sprayed on difficult to reach areas. Being rich in Zinc content provides great wear and corrosion protection. Contents Aluminium and other metals as well.

It forms a greasy, non-waxy thick green coat which protects from rusting and corrosion. Excellent for short term corrosion protection of moulds and dies. Provide lubrication to gears, chains, pulleys etc. Care should be taken to avoid heavy wiping of coat. Coating can be easily removed by use of clean cloth and mild solvents. Use PROTECTO 200 - Mould Cleaning Spray for effective cleaning.

It forms an oily, non-drying film which provides excellent corrosion resistance to expensive parts. Provides corrosion resistance upto 2 years. Also provides lubrication to assemblies. Coating can be easily removed by use of cleaning / degreasing agents. Use PROTECTO 205 Cleaner & Degreaser Spray for effective cleaning.

It is a Heavy Duty Release Agent for Synthetic Fiber with good resistance against high temperatures and with good adhesion to metal surfaces. Prevents melted polymers from sticking on hot surfaces. A small dose of spray on the metal surface gives an excellent separation effect over a long period

It is an efficient mould cleaner. Easily removes dirt, grime and waxy deposits from intricate moulds. Fast drying and non-corrosive.

It is a highly efficient cleaner of carbon deposits, grease, flux and other contaminants from electrical circuitry. It protects electrical contacts from humidity and corrosion. It maintains electrical conductivity, prevents electrolytic action and eliminates contact burns. Evaporates instantly leaving no residue.

It is a highly efficient universal cleaner. It thoroughly cleans carbon deposits, grease, dirt and other contaminants from electric-mechanical components. Evaporates instantly leaving no residue. It is non-corrosive and non-staining.

It is a heavy-duty surface-cleaning agent especially for delicate surface of gadgets primary heater in textile processing machinery. It is composed of highly surface-active neutral agents to clean the deposits of burnt oil carbon from delicate gadgets primary heater surfaces. The neutral surface-active agents remove the deposits without much effort and scrapping, preserving the surface from scratches.

It provides excellent wear and corrosion protection by imparting cathodic protection to the base metal. Ideal as high quality rust protection primer. Fast drying and can be easily sprayed on difficult to reach areas. Contents 100% Zinc metal particles exhibits outstanding performance in corrosive environments

It provides clear, colourless and wear resistant coating to electronic circuitry. Quick drying and scratch resistant protects circuitry from dust and moisture. Also used as an anti-corrosion coating for PCBs and other components. If needed allows re-soldering.

It is specially formulated by using superior quality paint to provide excellent finish on surfaces. Its fast drying action decreases waiting time and increases efficiency. Available in variety of regular and customized shades.

It is a part of Dye Penetrant Testing procedure.Used for cleaning of test surface. Thoroughly cleans surfaces and prepares it for comprehensive crack detection. It conforms to the requirement of IS-3658/12889, ASTM-E-165/1220, ASME Sec V, and MIL-1-25135/6866 Specifications for the code of practice for Liquid Penetrant Flaw Detection. Free of Chlorine & Sulphur. Non-toxic & non-corrosive.

It is a part of Dye Penetrant Testing procedure. Specially formulated Red dye penetrates cracks and detects surface defects upto 1 micron width by 30 micron depth on standard Ni-Cr Test panel. It conforms to the requirement of IS-3658/12889, ASTM-E-165/1220, ASME Sec V, and MIL-1-25135/6866 Specifications for the code of practice for Liquid Penetrant Flaw Detection. Free of Chlorine & Sulphur. Non-toxic & non-corrosive

It removes gum and varnish from the venturi. It will not harm catalytic converts. Also suitable for cleaning metal surfaces from grease, dirt and oil. Specially added rust protector provides a fine protective film prevents metal surfaces from corroding.

It thoroughly cleans disc and drum brakes, clutch components, adhesion and sealing surfaces of lining dust, oil, grease and dirt. Evaporates instantly leaving no residue. It is non-corrosive and non-staining.

It effortlessly cleans and shines the tyres. It cleans dirt and grime from the tyre and restores its shine. Helps in protecting tyres from embrittlement and prevents premature fading and cracking. Harmless on wheel caps, aluminium rims or painted surfaces. Contains no solvents. Anti-static.

It provides high gloss, deep lustre and durable finish to cars dashboard. It helps maintain the shine for long period of time. It protects surface from discolouration of dashboard due to sunlight and pollution. Also helps to remove micro scratches and light oxidation.

Cleaner & degreaser spray is a highly efficient universal cleaner. it thoroughly cleans carbon deposits, grease, dirt and other contaminants from electric-mechanical components. Evaporates instantly leaving no residue. It is non-corrosive and non-staining. Applications can be safely used on all types of electrical and mechanical parts. For offline use only.Pack size 300 gm (450 ml) aerosol can