Aerium Tech Pvt. Ltd.

Kalbadevi, Mumbai, Maharashtra

PR-1422 Class B is an aircraft integral fuel tank sealant. It has a service range from -65F (-54C) to 250F (121C), with intermittent excursions up to 275F (135C). This material is designed for fillet sealing fuel tanks and other aircraft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.

SUPERSOLVE AS aerosol is an exceptionally clean, fast evaporating and low odour solvent degreaser, which dries rapidly to a residue free finish.
Supersolve AS has been formulated with highly refined solvents for excellent compatibility with circuit boards, insulating materials and electronic components.

Hylomar Aerograde is a highly engineered, non-setting and non-hardening gasketing compound for use in the aeronautical industry with a wide operating temperature of -50C to +250C. Hylomar Aerograde was developed in conjunction with Rolls Royce Aerospace Division for sealing joints in turbine engines.

Airhawk Tube Type 120 MPH Rated General Aviation Tire

Airhawk Tube Type 120 MPH Rated General Aviation Tire

AirTrac Tube Type Economical General Aviation Tire

A laboratory and field test device for determining the presence in aviation turbine fuels of finely dispersed undissolvedwater, in concentrations lower than those normally detectable bywater detectingpaste or by visual examination

• Designed to remove residues of oil, grease, grime and carbon from the exterior surfaces of aircraft

ANTI-STATIC OPTICAL CLEANER is a versatile ready to use hard surface cleaner containing specialist anti-static agents, that prevents the build-up of static charges upon treated surfaces.

ANTIFREEZE is an ethylene glycol based engine coolant concentrate formulated for optimum performance in heavy duty diesel engine applications but equally suitable for light duty use.

AQUAKLENZ CP is an aqueous, low foaming degreaser for use in parts washers, rotating spray wash cabinets and tunnel washers.

CLO-TABS are convenient chlorine release tablets designed for simple dilution with water to provide a fresh chlorine solution of known strength.

• Removes dirt and grime from the interior surfaces of aircraft
• Concentrated
• Complies with AMS1550A
• Aircraft operators and manufacturers in the aerospace industry
• Economical in use
• Pleasantly fragranced

FASTKLEAN is a rapid evaporating cleaner and degreaser designed for use on electrical components and machinery where reduced downtime is critical.

GL REMOVER has been specially formulated for a convenient, safe and efficient removal of label and sticker residues from a wide variety of surfaces. It also allows for quick and easy removal of the residue that can be left over from adhesive tapes.

HR10 CHEWING GUM REMOVER is designed to soften and remove residues of chewing gum from floors, carpets and upholstery.

HYPOSAN is a hypochlorite based disinfectant sanitiser, that offers rapid and effective control of bacteria providing both effective disinfection and odour control. Hyposan may also be used to bleach mops and cloths and is a very effective tannin remover.

MICROSOLVE uses micro-emulsion technology, combining specialist surfactants and solvents to provide exceptional degreasing power allied with the economy and convenience of dilution with water.

ODOURKILL is a water soluble odour neutraliser, which uniquely masks foul and unpleasant odours rather than replacing them with a strong scent.

POWERSOLVE WIPES have been developed as a general purpose degreasing wipes, impregnated with a blend of solvents designed to provide a quick and effective removal of resins, adhesive and inks combined with rapid drying and minimal residue.

• Removes oil, grease and particles from metals machinery and electrical components, drying rapidly to a residue free finish

QUAT FREE HARD SURFACE SANITISER RTU is an effective hard surface cleaner containing a broad-spectrum biocide which is not a quaternary
ammonium compound. With a non-caustic formula, Quat Free RTU is suitable for sensitive galvanised and aluminium surfaces.

Rapide provides a quick and efficient degreasing solution on a wide range of surfaces including metal and composite components where a residue-free surface is critical. Rapide is approved for use on a wide range of surfaces, including epoxy painted surfaces. It has widespread applications during manufacturing and maintenance processes within Aerospace, Automotive, Rail, Energy, Marine and other precision engineering sectors.

RTU SUMMER TRAIN SCREENWASH is tailored to the warmer months of the year, keeping train windscreens clear of dirt, grime and insect
residues.

SANIFOAM Aerosol is a foaming bactericidal cleaner designed to clean and sanitise surfaces. Sanifoams foam action improves cling on vertical surfaces and acts as a visual indicator ensuring even coverage.

Shield NF is formulated to provide excellent thin film corrosion prevention. It can also be used as a de-watering fluid, flushes away residues of oil, grease and other contaminants and acts as a deep penetrant into threads and mechanisms. Shield NF is classified as non-flammable and has a light fragrance.

SHS LOW FOAM is an extremely versatile concentrated cleaner designed to remove dirt and grime from the interior surfaces of vehicles including cars, commercial vehicles, buses and trains. SHS may also be used to clean interior plastics and ideal for cleaning vinyl and linoleum flooring.

ZX-54 is an incredibly versatile product that acts as a light-duty lubricant, penetrant/ release agent, dewatering fluid and corrosion preventative. ZX-54 complies with UK DEF STAN 91-72/1. ZX-54 contains a blend of cleaning solvents to wash away residues of oil and grease, dispelling water and allowing deep penetration into threads and mechanisms. ZX-54 is formulated with refined solvents providing low odour, excellent materials compatibility and reduced flammability in use.

• Enhanced traction
• Uniform wear and extended service life
• Quality construction

• Wide rib tread design and large footprint
• Tough-wearing tread rubber
• Triple-tempered nylon casing cord

Michelin AIR: The tire for demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelins toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the Posi-Fit bead construction reduces movement between the tire and the wheel for improved lateral stability.

CONDOR TIRE 6.00-6 4PLY aircraft tyre

Duralac is a chromate containing jointing compound designed to inhibit electrolytic decomposition between dissimilar metals

Bonderite L-GP 333-1 EU Black PTFE Coating. It is a blend of fluorocarbon lubricants in an organic resin binder and solvent system designed for applications beyond the scope of conventional fluorocarbon coatings.

Hylomar Universal Blue is a high performance, non-setting gasket and jointing compound. The compound is resistant to a wide range of fluids including:

• Industrial fluids
• Oils
• Petroleum and synthetic diester lubricating oils
• Gasoline and kerosene
• Water/glycol and methanol/water mixtures
• Air
• Turbine and piston engine combustion products

These AeroShell piston engine oils offer the ashless dispersant performance of AeroShell Oils W80 and W100 but with better anti-wear and anti-corrosion than conventional single grade oil, thanks to the same additives for this purpose used in AeroShell Oil W15W-50 Multigrade.

Dapco 2100 is anadhesive, solvent-free, thixotropic silicone paste. Dapco 2100 is most commonly used as a coating, sealant, or filleting material in the construction, repair and maintenance of all types of aircraft.

Airhawk Tube Type 120 MPH Rated General Aviation Tire

Teroson PU8590 is a high viscous direct glazing adhesive used for windscreen bonding.

Plastic Steel 5 Minute Putty isa steel filled epoxy putty for general maintenance and repairs. Used for filling, rebuilding and bonding metal surfaces.

3M Finesse it Polish Final Finish works well for buffing automotive OEM, marine, and aerospace coatings. This material also produces superior results in top coat rubbing and other woodworking applications requiring satin, semi gloss, and high gloss finishes. This same material can also be used in the 3M Finesse it Trizact Paint Repair System for AOEM paint and clear coats. Finish results are dependent on the combination of coating type, polish, and tools used.Our 3M Finesse it products are a line of specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse it products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.

3M Scotch-Weld EC-1300L is used to bond metal, wood, most plastics, neoprene, reclaim, SBR and butyl rubber.
3M Scotch-Weld Adhesive 1300L up to 8 minutes.
3M Scotch-Weld 1300L is a lower solids viscosity version of 3M Scotch-Weld 1300L, for easier brushing and sprayability.

Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

• Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
• Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
• Permits disassembly with hand tools
• Especially suited to small thread size.

LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3.LOCTITE 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280, 000 - 800, 000 mPas and service temperature -55 to +150C. UL approved.

• Provides an instant low pressure seal
• Doesnt creep, shrink or block systems
• Single component - clean and easy to apply
• Thixotropic and high/very high viscosity
• UL approved

B&B RE-GEL is a gel-type aircraft exterior cleaner qualified MIL-PRF-87937D Type III, Cleaning Compound. It is selected to remove medium to heavy soils from exterior surfaces.

B&B JET-7 is a water-based aircraft exterior cleaner qualified to MIL-PRF-87937D, Type IV Cleaning Compound. Selected to remove dirt, grime, oils, hydraulic fluid (e.g. Skydrol) and other soils. B&B JET-7 is also suitable for use in confined areas such as bilges and equipment bays

B&B TC-100N-3 is an aqueous cleaner concentrate developed to provide aircraft, marine, power generating and other industries with a concentrated turbine engine gas path cleaning compound for off-line (starter cranked) and for on-line (fired) engine cleaning. When used as directed, it is effective in cleaning compressor blades, stators, air passages, etc. in turbine engines. Safeguards against abnormal temperature increases, power loss and increases in fuel consumption

Low viscosity, unfilled epoxy casting resin system, curing at room temperature. High filler addition possibilit

Araldite 501 A/B epoxy system is a two-part system that cures at either ambient orelevated temperatures. It is designed for use in repair of composite aircraft components and for fixation of inserts, maintaining its performance characteristics at temperatures up to 120C.Araldite??? 501 A/B is qualified to the ASNA 4047 and to the AIMS 10-04-024 specifications