GST : 27AATCA7073M1ZV
Verified
Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Hylomar Aerograde PL-32, 5.00x5 6 Ply Specialty Tires Of America, Air Hawk Tire, 6.00x6 4 Ply Specialty Tires Of America, Air Hawk Tire, 6.00x6 6Ply Specialty Tires Of America, Air Trac Tire and Bonderite L-GP 333-1 EU.
Hylomar Aerograde is a highly engineered, non-setting and non-hardening gasketing compound for use in the aeronautical industry with a wide operating temperature of -50C to +250C. Hylomar Aerograde was developed in conjunction with Rolls Royce Aerospace Division for sealing joints in turbine engines.
Airhawk Tube Type 120 MPH Rated General Aviation Tire
Airhawk Tube Type 120 MPH Rated General Aviation Tire
AirTrac Tube Type Economical General Aviation Tire
A laboratory and field test device for determining the presence in aviation turbine fuels of finely dispersed undissolvedwater, in concentrations lower than those normally detectable bywater detectingpaste or by visual examination
Bonderite L-GP 333-1 EU Black PTFE Coating. It is a blend of fluorocarbon lubricants in an organic resin binder and solvent system designed for applications beyond the scope of conventional fluorocarbon coatings.
Hylomar Universal Blue is a high performance, non-setting gasket and jointing compound. The compound is resistant to a wide range of fluids including:
These AeroShell piston engine oils offer the ashless dispersant performance of AeroShell Oils W80 and W100 but with better anti-wear and anti-corrosion than conventional single grade oil, thanks to the same additives for this purpose used in AeroShell Oil W15W-50 Multigrade.
Dapco 2100 is anadhesive, solvent-free, thixotropic silicone paste. Dapco 2100 is most commonly used as a coating, sealant, or filleting material in the construction, repair and maintenance of all types of aircraft.
Duralac is a chromate containing jointing compound designed to inhibit electrolytic decomposition between dissimilar metals
CLO-TABS are convenient chlorine release tablets designed for simple dilution with water to provide a fresh chlorine solution of known strength.
MICROSOLVE uses micro-emulsion technology, combining specialist surfactants and solvents to provide exceptional degreasing power allied with the economy and convenience of dilution with water.
Teroson PU8590 is a high viscous direct glazing adhesive used for windscreen bonding.
3M Scotch-Weld EC-1300L is used to bond metal, wood, most plastics, neoprene, reclaim, SBR and butyl rubber.
3M Scotch-Weld Adhesive 1300L up to 8 minutes.
3M Scotch-Weld 1300L is a lower solids viscosity version of 3M Scotch-Weld 1300L, for easier brushing and sprayability.
B&B TC-100N-3 is an aqueous cleaner concentrate developed to provide aircraft, marine, power generating and other industries with a concentrated turbine engine gas path cleaning compound for off-line (starter cranked) and for on-line (fired) engine cleaning. When used as directed, it is effective in cleaning compressor blades, stators, air passages, etc. in turbine engines. Safeguards against abnormal temperature increases, power loss and increases in fuel consumption
Low viscosity, unfilled epoxy casting resin system, curing at room temperature. High filler addition possibilit
Araldite 501 A/B epoxy system is a two-part system that cures at either ambient orelevated temperatures. It is designed for use in repair of composite aircraft components and for fixation of inserts, maintaining its performance characteristics at temperatures up to 120C.Araldite??? 501 A/B is qualified to the ASNA 4047 and to the AIMS 10-04-024 specifications
Araldite AY 121N-1 / HY 991 is a general purpose, two component, room temperature curing, paste which can fill gaps of up to 2mm. It is suitable for bonding wide variety of metals, ceramics, glass, rubbers, rigid plastics and most other materials in common use.
NYCO GREASE GN 22 is a NLGI 2, clay-thickened grease, based on a synthetic hydrocarbon oil with a viscosity of 7 cSt at 100C. It is resistant to corrosion, oxidation and contains anti wear/extreme pressure additives. It can be used from -65C to +177C.
Nyco Grease GN GA 47 is a homogenous mixture of pure petrolatum and 50 % of micronised graphite. It is a fairly good electrical conductor
dowsil rtv 732 also known as dow corning 732is a acetoxy multi-purpose sealant.
3M Finesse it Polish Final Finish works well for buffing automotive OEM, marine, and aerospace coatings. This material also produces superior results in top coat rubbing and other woodworking applications requiring satin, semi gloss, and high gloss finishes. This same material can also be used in the 3M Finesse it Trizact Paint Repair System for AOEM paint and clear coats. Finish results are dependent on the combination of coating type, polish, and tools used.Our 3M Finesse it products are a line of specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse it products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.
ARALDITE AV 138M with harden VH 998 is two Component room temperature curing paste adhesive of high strength
the henkel bonderite m-cr 1132 aero pen is designed to save labor, material, and time when applying a dry-inplace military specification approved chromate conversion coating for touch-up applications. its proper use also reduces worker contact to chromating solutions and waste, such as rinse water generated from a chromating process. ready stock!
tesa4169 is an extremely robust high-performance adhesive tape for permanent floor markings. The abrasion-resistant, robust and resilient floor-marking tape comprises a soft PVC substrate with an acrylate adhesive mass. It can also be used on sensitive or rough surfaces and, thanks to the high degree of flexibility in the substrate, is also suitable for adhesion to corners.tesa4169 is available in black, green, white, blue, red, yellow and yellow/black; the color combinations correspond to legally prescribed safety guidelines. Depending on its color, the floor-marking tape can be explicitly used as a warning tape.
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3.LOCTITE 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280, 000 - 800, 000 mPas and service temperature -55 to +150C. UL approved.
Nyco Grease GN 17 is a soft NLGI 2 grease, based on a synthetic diester oil thickened with a lithium soap. It is fortified with anti-corrosion, antioxidant and anti-wear additives. It also contains 5% of molybdenum disulphide as solid lubricant. Nyco Grease GN 17 can be used from -73C to +121C.
SHS LOW FOAM is an extremely versatile concentrated cleaner designed to remove dirt and grime from the interior surfaces of vehicles including cars, commercial vehicles, buses and trains. SHS may also be used to clean interior plastics and ideal for cleaning vinyl and linoleum flooring.
Shield NF is formulated to provide excellent thin film corrosion prevention. It can also be used as a de-watering fluid, flushes away residues of oil, grease and other contaminants and acts as a deep penetrant into threads and mechanisms. Shield NF is classified as non-flammable and has a light fragrance.
Araldite 403 A/B is a two pack cold curing structural adhesive system developed primarily for use in riveted joints to give improved fatigue resistance.Araldite 403 A/B is a two pack cold curing structural adhesive system developed primarily for use in riveted joints to give improved fatigue resistance.
Dow DOWSIL 3145 RTV MIL-A-46146 Adhesive Sealant Clear is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards and sealing housings, modules, and electrical leads. It is non-flowing and has high elongation, tensile, and tear strength. 90 mL Tube.
AQUAKLENZ CP is an aqueous, low foaming degreaser for use in parts washers, rotating spray wash cabinets and tunnel washers.
FASTKLEAN is a rapid evaporating cleaner and degreaser designed for use on electrical components and machinery where reduced downtime is critical.
HYPOSAN is a hypochlorite based disinfectant sanitiser, that offers rapid and effective control of bacteria providing both effective disinfection and odour control. Hyposan may also be used to bleach mops and cloths and is a very effective tannin remover.
Rapide provides a quick and efficient degreasing solution on a wide range of surfaces including metal and composite components where a residue-free surface is critical. Rapide is approved for use on a wide range of surfaces, including epoxy painted surfaces. It has widespread applications during manufacturing and maintenance processes within Aerospace, Automotive, Rail, Energy, Marine and other precision engineering sectors.
| Michelin AIR: The tire for demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelins toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the Posi-Fit bead construction reduces movement between the tire and the wheel for improved lateral stability. |
ANTIFREEZE is an ethylene glycol based engine coolant concentrate formulated for optimum performance in heavy duty diesel engine applications but equally suitable for light duty use.
RTU SUMMER TRAIN SCREENWASH is tailored to the warmer months of the year, keeping train windscreens clear of dirt, grime and insect
residues.
Plastic Steel 5 Minute Putty isa steel filled epoxy putty for general maintenance and repairs. Used for filling, rebuilding and bonding metal surfaces.
POWERSOLVE WIPES have been developed as a general purpose degreasing wipes, impregnated with a blend of solvents designed to provide a quick and effective removal of resins, adhesive and inks combined with rapid drying and minimal residue.
Michelin AIR: The tire for demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelins toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the Posi-Fit bead construction reduces movement between the tire and the wheel for improved lateral stability.
Dow DOWSIL 3145 RTV MIL-A-46146 Adhesive Sealant Gray is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards, yokes, adding mechanical stability, and sealing housings, modules, and electrical leads. It is non-flowing, adds thermal stability, high temperature stability, and has high elongation and tensile strength. 90 mL Tube.
ODOURKILL is a water soluble odour neutraliser, which uniquely masks foul and unpleasant odours rather than replacing them with a strong scent.
Skydrol LD-4 was introduced in 1977 , and is well known around the world. At the time of its introduction it was a breakthrough product, solving problems of valve erosion and thermal stability common in earlier fluids. Its excellent thermal stability under real world conditions has given it a reputation as the gold standard among Type IV fluids. Skydrol LD-4 features low density, excellent thermal stability, valve erosion prevention, and deposit control.
Namrata Majithia (Aerium Tech Pvt. Ltd.)
30, FLOOR-2ND, PLOT-413, D/E, VASANTWADI, KOLBHAT LANE, KALBADEVI ROAD, Mumbai, Maharashtra, India
Share us via
View Contact Number 
