Our Products
Valves & Valve Fittings
2 Products availableFuel Handling Systems
2 Products availableElectric Stacker
1 Products availablePollution Control Machines & Devices
1 Products availableIndustrial Valves
1 Products availableCrushing Machines
1 Products availableElevators
1 Products availableFilters & Filtration Systems
1 Products availableOur offered Product range includes Telescopic Chute Quick and Coal Handling System.
rotary valves feeders are placed under the hoppers or bins to arrange for uniform feed of material to the conveying equipment. Basically it is a volumetric feeding device which helps in applications where the flow rate of the solids needs to be controlled. They can be designed to have approximately 85% volumetric efficiency. Its features are ; body: manufactures out of ms ci accurately machined to required tolerance rotor: manufactured out of alloy steel shaft with rotor blades welded to the shaft rotor tips can also be provided with rubber, nylon, uhmw material bearings: anti-friction bearings with sufficient radial load rating, of reputed make
a dust collection equipment in general is by far the most common and popular method of cleanup employed in the modern industry. Major components of a typical dust collection system include ducting, suction hoods, dampers, bag filter (which further contains filter bags, sequential timer, solenoid valves and rotary airlock valve) and blower exhauster fan. The dust is captured on woven or felted fabric of the fabric filter bags as the air passes through and is used where there is heavy dust burden. These have highest collection efficiency and are now by far the most important group in industry. Dust collection equipments from aegis are time tested and are highly effective and reliable. Aegis manufactures both centralized as well as unitary type dust collection equipments. Unitary type dust collection equipment from aegis can be used for single or two points and comes with mobility feature and are very light weight with easy cleaning arrangement. Aegis manufactures complete dust collection system for controlling checking air pollution in plant manufacturing unit. Dust collection systems manufactured by aegis can be an integral part of the bulk material handling systems supplied by aegis or can be installed on existing system where dusting and pollution are the problem areas. Its features are ; superior design and workmanship leading to effective dust control high efficiency and economical operation compressed air bag cleaning
slide gate valve for bulk material handling is normally used on the bottom or sides of storage devices such as bins, tanks, or hoppers and conveyors, to feed material for further conveying or processing, or into trucks or railroad cars for shipment to other points. Numerous styles of slide gate valve are slide gate valve for bulk material handling is normally used on the bottom or sides of storage devices such as bins, tanks, or hoppers and conveyors, to feed material for further conveying or processing, or into trucks or railroad cars for shipment to other points. Numerous styles of slide gate valve are available with square or rectangle flanges. Many of these are general purpose slide gate valves suitable for handling wide range of bulk materials. Material of construction for slide gate valve can be chosen depending on the type of product handled and application: fine, granular, lumpy, abrasive, corrosive, or sanitary.
bucket elevator is in use and has proven to be effective and efficient for vertical transport of wide range of bulk materials for decades. It is available in a wide range of capacities and may operate entirely in the open or be totally enclosed. Typical bucket elevator consists of a series of buckets mounted on either a chain or a belt operating over a sprocket or pulley. In order to compensate for any changes in length of belt or chain due to temperature change or wear and tear, take ups are provided. Other critical parts includes head section (which contains head pulley or sprocket) and boot section (which includes tail pulley or sprocket), intermediate sections. Material is fed into an inlet hopper. Buckets through scooping action dig into the material, and convey it up to and over the head sprocketpulley, then throwing the material out the discharge throat. The emptied buckets then continue back down to the boot to continue the cycle. Features; standardized design, however for special applications we offer necessary customization available in chain or belt type with single or double rows of buckets available in both, continuous and centrifugal discharge type rugged design with complete casing for dust free and weather proof operation
aegis have had years of field and development experience and are experts at solving screening problems. Vibratory screens are manufactured with single or multiple deck and are used primarily for grading of material by size. The working principle of vibratory screen is simple. The vibration effect leads to the screening of material through the screen (mesh) of appropriate size. The vibration effect is caused by the rotation of shaft with its eccentric weights. The throw of the vibrating screen can be easily varied by adjusting the eccentric weights. Its application are; used for grading material by size can also be used for washing material, dewatering, descaling or any combination of these operations suitable to screen wide range of products such as sand and gravel, building materials, minerals, ores, pellets, sinter, coal, coke, pet coke, lignite, limestone, dolomite, chemical products, fertilizers, etc.
stacker is employed for mechanizing bag stacking and un-stacking operation inside the godownwarehouse. Units like bagscartonsboxes can be conveniently stacked up to height of 15-18 feet, which is not possible or cumbersome if done manually and requires many laborers. Storage capacity of godowns can be increased and stacking time and cost can be reduced substantially. Stacker can also be used for loading and unloading operation from small trucks with smaller depths. Stacker along with set of mobile conveyors can be employed for mechanizing total bag handling. Stackers manufactured by aeigs are light weight and comes with mobile options with either wheel or rail mounting. The light weight of stacker helps in easy maneuverability. Stackers manufactured by aegis come with hydraulic mechanism for varying boom height. Stackers manufactured by aegis are characterized by ease of operation, precise construction and less maintenance costs. Features ; available in skid plate type or roller type models light weight for easy maneuverability available in varying belt width i.e. 500 600 700 mm available in fixed and mobile type comes with hydraulically controlled inclination for varying boom height variable belt speed with vfd to control handling capacity can handle loads from 10 kg to 50 kg
knittel hammer crushers involve the use of impact rather than pressure to crush material. Single rotor hammer crushers are used for crushing run-of-mine coal, stone, ore, cullet and other difficult materials. They reduce large-lump materials to 6 to 8 mm size in one operation. These can be furnished with or without a metal trap for the removal of tramp iron or un-crushable lumps.