Aegis Eng. Co. Pvt. Ltd.

Vatva, Ahmedabad, Gujarat

rotary valves feeders are placed under the hoppers or bins to arrange for uniform feed of material to the conveying equipment. Basically it is a volumetric feeding device which helps in applications where the flow rate of the solids needs to be controlled. They can be designed to have approximately 85% volumetric efficiency. Its features are ; body: manufactures out of ms ci accurately machined to required tolerance rotor: manufactured out of alloy steel shaft with rotor blades welded to the shaft rotor tips can also be provided with rubber, nylon, uhmw material bearings: anti-friction bearings with sufficient radial load rating, of reputed make

a dust collection equipment in general is by far the most common and popular method of cleanup employed in the modern industry. Major components of a typical dust collection system include ducting, suction hoods, dampers, bag filter (which further contains filter bags, sequential timer, solenoid valves and rotary airlock valve) and blower exhauster fan. The dust is captured on woven or felted fabric of the fabric filter bags as the air passes through and is used where there is heavy dust burden. These have highest collection efficiency and are now by far the most important group in industry. Dust collection equipments from aegis are time tested and are highly effective and reliable. Aegis manufactures both centralized as well as unitary type dust collection equipments. Unitary type dust collection equipment from aegis can be used for single or two points and comes with mobility feature and are very light weight with easy cleaning arrangement. Aegis manufactures complete dust collection system for controlling checking air pollution in plant manufacturing unit. Dust collection systems manufactured by aegis can be an integral part of the bulk material handling systems supplied by aegis or can be installed on existing system where dusting and pollution are the problem areas. Its features are ; superior design and workmanship leading to effective dust control high efficiency and economical operation compressed air bag cleaning

slide gate valve for bulk material handling is normally used on the bottom or sides of storage devices such as bins, tanks, or hoppers and conveyors, to feed material for further conveying or processing, or into trucks or railroad cars for shipment to other points. Numerous styles of slide gate valve are slide gate valve for bulk material handling is normally used on the bottom or sides of storage devices such as bins, tanks, or hoppers and conveyors, to feed material for further conveying or processing, or into trucks or railroad cars for shipment to other points. Numerous styles of slide gate valve are available with square or rectangle flanges. Many of these are general purpose slide gate valves suitable for handling wide range of bulk materials. Material of construction for slide gate valve can be chosen depending on the type of product handled and application: fine, granular, lumpy, abrasive, corrosive, or sanitary.

bucket elevator is in use and has proven to be effective and efficient for vertical transport of wide range of bulk materials for decades. It is available in a wide range of capacities and may operate entirely in the open or be totally enclosed. Typical bucket elevator consists of a series of buckets mounted on either a chain or a belt operating over a sprocket or pulley. In order to compensate for any changes in length of belt or chain due to temperature change or wear and tear, take ups are provided. Other critical parts includes head section (which contains head pulley or sprocket) and boot section (which includes tail pulley or sprocket), intermediate sections. Material is fed into an inlet hopper. Buckets through scooping action dig into the material, and convey it up to and over the head sprocketpulley, then throwing the material out the discharge throat. The emptied buckets then continue back down to the boot to continue the cycle. Features; standardized design, however for special applications we offer necessary customization available in chain or belt type with single or double rows of buckets available in both, continuous and centrifugal discharge type rugged design with complete casing for dust free and weather proof operation

aegis have had years of field and development experience and are experts at solving screening problems. Vibratory screens are manufactured with single or multiple deck and are used primarily for grading of material by size. The working principle of vibratory screen is simple. The vibration effect leads to the screening of material through the screen (mesh) of appropriate size. The vibration effect is caused by the rotation of shaft with its eccentric weights. The throw of the vibrating screen can be easily varied by adjusting the eccentric weights. Its application are; used for grading material by size can also be used for washing material, dewatering, descaling or any combination of these operations suitable to screen wide range of products such as sand and gravel, building materials, minerals, ores, pellets, sinter, coal, coke, pet coke, lignite, limestone, dolomite, chemical products, fertilizers, etc.

The fuel processing and handling, offered by AEGIS, is used for preparation of coalligniteagro fuels to be used as a fuel in FBC Boilers, Hot Air Generators (Heaters) and other multi fuel fired systems in various industries. The fuel processing is used to produce fuel of right size suitable as per the specification of the FBC BoilersHeaters. We at AEGIS are capable of conceptualizing, designing, engineering, assembling and installing of custom fuel handling systems thereby acting as a full-service solutions provider.The entire system is conceptualized based on parameters such as fuel to be handled, capacity required, availability of space, processing required, economical considerations, etc. Following are some of the typical fuel handling systems supplied to various clients for handling various fuels.

stacker is employed for mechanizing bag stacking and un-stacking operation inside the godownwarehouse. Units like bagscartonsboxes can be conveniently stacked up to height of 15-18 feet, which is not possible or cumbersome if done manually and requires many laborers. Storage capacity of godowns can be increased and stacking time and cost can be reduced substantially. Stacker can also be used for loading and unloading operation from small trucks with smaller depths. Stacker along with set of mobile conveyors can be employed for mechanizing total bag handling. Stackers manufactured by aeigs are light weight and comes with mobile options with either wheel or rail mounting. The light weight of stacker helps in easy maneuverability. Stackers manufactured by aegis come with hydraulic mechanism for varying boom height. Stackers manufactured by aegis are characterized by ease of operation, precise construction and less maintenance costs. Features ; available in skid plate type or roller type models light weight for easy maneuverability available in varying belt width i.e. 500 600 700 mm available in fixed and mobile type comes with hydraulically controlled inclination for varying boom height variable belt speed with vfd to control handling capacity can handle loads from 10 kg to 50 kg

The Telescopic Chute is a very effective dust control equipment, primarily used for loading of bulk material into open trucks, bulkers and containers. It is also referred to as telescopic loading spout or simply loading spout. An important application of the equipment is in port mechanization i.e loading of barges and ships. It comprises of inner sections which can be either conical or cylindrical, which contains the bulk material flow. An outer bellow which is flexible is used to limit the propagation of dust. In case of mechanized warehouses, telescopic loading spout is used for maintaining dust free environment by containing the dust discharged from height. The equipment helps in maintaining clean and healthy environment form employees.

knittel hammer crushers involve the use of impact rather than pressure to crush material. Single rotor hammer crushers are used for crushing run-of-mine coal, stone, ore, cullet and other difficult materials. They reduce large-lump materials to 6 to 8 mm size in one operation. These can be furnished with or without a metal trap for the removal of tramp iron or un-crushable lumps.

Ash handling systems from AEGIS is used for economic and dust free handling & storage of fly ash and bottom ash. AEGIS offers mechanical ash systems that are reliable, cost effective and comes with proven performance with years of experience. Aegis has good number of installations for Mechanical Ash Handling Systems.

Rotary Valves have wide application in industry wherever dry free-flowing powders, granules, crystals, or pellets are used. It can be used to handle bulks even under high temperature. However it should not be used for hard and abrasive materials.