We offer an exclusively designed grated platform like mezzanine floor available in painted as well as hot dip coats. We also offer customized grated platform as per the clients requirements in terms of load and designs. We offer a wide range of grated platform properly fabricated and structured with dully paints. Our grated platform is specially designed to serve multi purposes including various industrial applications. special traits

• gratingswe are the best supplier of gratings. these gratings are normally comes in paint coated, & hot dip galvanized. as per the clients requirement & load we can design all kind of gratings.
• platforms can be designed as per clients requirements with proper fabricated structures and duly painted. These can be designed for various applications in various industries.

We offer a wide range of Material Handling Equipment majorly used for storing and transporting purposes. Our Material Handling Equipment comprises of Generator Trolleys & Trailers designed and manufactured as per clientâs requirement. Our Generator Trolleys & Trailers comes in two modes Turn Table Type & Ackerman Steering Type. Other than this, our exclusive Turn Table Type & Ackerman Steering Type is also categorized in two divisions: Built Jacks and Brakes & Storage Box. Our Built Jacks, Brakes & Storage Box also comprises of pallets and racks, mainly built for vehicles press components. Special Traits

• Capacity range : from 500 Kgs capacity to 15, 000 Kgs
• Mode : Turn Table Type & Ackerman Steering Type
• Comes with In-Built Jacks, Brakes & Storage Box
• Pallets types
  • Door panel Outer
  • Door Panel Inner
  • Roof Panels
  • Bonnets Outer & Inner
  • Main Wind Shield Glasses

We offer a wide range of Heavy Support Structure installed with Mezzanine Floors & Heavy Support. We offer innovative designs to cater to the distinctive needs of consumers. Our specially designed Heavy Support Structure creates more and more usable area from the total area. We have availability of all kinds of structures for all types of loads.

• Mezzanine Floors installation
• Innovative designs
• Creates more usable area
• Availability of different structures for all loads

We offer optimum quality Vehicle Surface Inspection Canopy or vehicle inspection shelters for the surface checking purposes. Our vehicle inspection shelters are specially developed with bright illumination specifying different lux levels of light at different points of the object. Our vehicle inspection shelters has heavy load of light fittings, covering panels & air ducts on the structure. Our vehicle inspection shelters is also efficient enough to take heavy weight rolled steel structure i.e. Ms beams & ms channels. We also provide the object presence sensors along with our exclusive vehicle inspection shelters to save the energy. special traits

• structure of open deck canopiesin this type there is only the load of light fittings on the structure of canopy, so we take light weight tubular structure. It is detachable, so that in future if our client wants to move the canopy, then it will be very easy. Simple types of brackets on which the light fitting will be installed. These types of structures are low in the costs.
• structure of closed deck canopiesin this type there is a heavy load of light fittings, covering panels & air ducts on the structure, so we take heavy weight rolled steel structure i.e. Ms beams & ms channels. this is also a detachable type of structure. In this type the light fitting are usually install from outside of covering panels. Surface coating type is mainly depending upon the clients requirement i.e. G.i. Coating, painting or powder coating.
• illuminationthis is the main part of light canopies. Client has to specify the different lux levels of light at different points of the object (places) in the canopies & colors of light. The spacing between the light fittings & positions of light fittings depend on the required lux level at required points of vehicle. we have recently designed, manufactured & installed dimmable (1000 lx to 2000 lx)light canopies at volkswagens pune plant illumination types
  • clear lenses type
  • diffused type
  • dimmable type
• electrical & electronics
  • we use lapp/finolex cables, plastic/gi cable trays, proper dressed cabling with control panel.
  • we can provide the object presence sensors to save the energy, with the help of this the lights will turn on automatically when an object enters in the canopy & turn off as an object goes out.

to enquire about the desired product(s), just check the box and then click inquiry now button which is provided below.

We offer optimum quality Vehicle Surface Inspection Canopy or Vehicle Inspection Shelters for the surface checking purposes. Our Vehicle Inspection Shelters are specially developed with bright illumination specifying different lux levels of light at different points of the Object. Our Vehicle Inspection Shelters has heavy load of Light Fittings, Covering Panels & Air Ducts on the structure. Our Vehicle Inspection Shelters is also efficient enough to take heavy weight rolled steel structure i.e. MS beams & MS Channels. We also provide the Object Presence Sensors along with our exclusive Vehicle Inspection Shelters to save the energy. Special Traits

• Structure of Open Deck CanopiesIn this type there is only the load of light fittings on the structure of canopy, so we take light weight tubular structure. It is detachable, so that in future if our client wants to move the canopy, then it will be very easy. Simple types of Brackets on which the Light Fitting will be installed. These types of structures are low in the costs.
• Structure of Closed Deck canopiesIn this type there is a heavy load of Light Fittings, Covering Panels & Air Ducts on the structure, so we take heavy weight rolled steel structure i.e. MS beams & MS Channels. This is also a detachable type of structure. In this type the light fitting are usually install from outside of covering panels. Surface coating type is mainly depending upon the clients requirement i.e. G.I. Coating, painting or Powder Coating.
• IlluminationThis is the main part of light canopies. Client has to specify the different lux levels of light at different points of the Object (places) in the canopies & colors of light. The spacing between the light fittings & positions of light fittings depend on the required lux level at required points of vehicle. We have recently designed, manufactured & installed dimmable (1000 lx to 2000 lx)light canopies at Volkswagens Pune Plant Illumination Types
  • Clear Lenses Type
  • Diffused Type
  • Dimmable Type
• Electrical & Electronics
  • We use Lapp/Finolex cables, Plastic/GI Cable Trays, Proper Dressed Cabling with Control Panel.
  • We can provide the OBJECT PRESENCE SENSORS to save the energy, with the help of this the lights will turn on automatically when an OBJECT enters in the canopy & turn off as an OBJECT goes out.