Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

AT

Advanced Technocracy Inc.
location Ambala Cantt, Ambala, Haryana

Write a Review
Call Now Call Now

Our Products

  1. Heat Transfer Lab Equipment 38 Products available
  2. Laboratory Apparatus 37 Products available
  3. Fluid Mechanics Lab Equipment 36 Products available
  4. Laboratory Instruments 21 Products available
  5. Microscopes 17 Products available
  6. Test Rig 15 Products available
  7. Microscope 11 Products available
  8. Analytical Instruments 8 Products available
  9. Oil And Petroleum Testing Inst 7 Products available
  10. Measuring Instruments & Equipment 7 Products available
  11. Others Products 113 Products available

Test Rig

We offer a complete product range of Francis Turbine Test Rig, Jet Pump Test Rig, Closed Circuit Kaplan Turbine Test Rig, Double Stage Air Compressor Test Rig and Closed Circuit Pelton Wheel Turbine Test Rig 5 HP

Francis Turbine Test Rig

Francis Turbine Test Rig
  • Min. Order (MOQ) 1 Piece
Advanced technocracy inc. Is manufacturer, exporter & supplier of francis turbine test rig.francis turbine test rigthese reaction turbines are made available to the clients at highly competitive prices and in varied specifications. Moreover, our clients can avail these products from us in customized forms that are designed as per the exact details provided by the clients. details:- water enters the turbine though outer periphery of the runner in and leaves the runner in axial direction- when water flows to the the runner, a part of pressure energy changes to kinetic energy- water is completely enclosed in an air tight casing- the casing & runner is always full of water- present set-up has a runner- water is fed to the turbine by centrifugal pump, radially to the runner- the runner is mounted on one end of a central ss shaft & other end is connected to a break arrangement- circular window of the turbine casing has a transparent acrylic sheet- runner assembly is supported by thick cast iron pedestal- load is applied to the turbine by the brake arrangement and the efficiency of the turbine can be calculated- draught tube is fitted on the outlet of the turbine- set-up is complete with guide mechanism- pressure & vacuum gauge are fitted at the inlet & outlet of the turbine for measuring the total supply head to the turbine.
View Complete Details
Ask Latest Price & Details
Jet Pump Test Rig

Jet Pump Test Rig
  • Min. Order (MOQ) 1 Piece
We are offering Jet Pump Test Rig.Sturdy constructionFlawless performanceAnti corrosive bodyLong operational lifeClosed Circuit Test Rig: a) The test rig consists of a 1.0 HP mono block jet pump (ejecto pump) of size. The pump discharges about 30 lpm at a total head of 20m. The pump is powered by single phase, 220 Volts, 50Hz. A stop watch and an M.S. Collecting tank of size 90 liters. With a gauge glass scale fitting, a drain valve and a bend are provided to measure the actual flow rate. An energy meter is provided to measure the input power to the pump set. b) Other standard accessories include switch, flow control gate valve, foot valve and piping system with suitable pressure taps to fix the pressure and vacuum gauges. C) A sump tank of size 250 liters with suitable drain is provided to store the water. A strong iron stand fitted with wheels supports the complete test rig. The unit is moveable. All tanks are provided with FRP lining for total rust protection.
View Complete Details
Ask Latest Price & Details
Closed Circuit Kaplan Turbine Test Rig

Closed Circuit Kaplan Turbine Test Rig
  • Min. Order (MOQ) 1 Piece
Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Closed Circuit Kaplan Turbine Test Rig.Type : Axial Flow Reaction TurbineCapacity : 5 HPRated Speed : 1500RPMDischarge Capacity : 4500 LitersMinuteSupply Head : 7 MetersGuide Vanes : Gun Metal Vanes (Aerofoil Blade Shaped)B. Loading :Rope BrakeMaterial :Cast IronDrum Size :300 mm diameterC. Supply Pump SetSize : 10 X 10Discharge : 5000 LitersMinuteTotal Head : 8 MetersMotor Capacity : 20 HPStarter for Motor : Star Delta Crompton MakeD. Flow MeasurementMaterial : C.I BodyManometer Fluid : MercuryE. Pressure Measurement Pressure & Vacuum gaugeF. RPM Indicator : DigitalG. Sump Tank:Material of Constructio : MS Powder Coating M.S. FRP LiningS.S UnitService Required : Electrical supply-7.5 HP, 3Phase, 440 Volts, 50HZ AC Supply
View Complete Details
Ask Latest Price & Details
Double Stage Air Compressor Test Rig

Double Stage Air Compressor Test Rig
  • Min. Order (MOQ) 1 Piece
We are offering double stage air compressor test rig.Features:high durabilityhigh accuracylonger service lifesmooth touch and frictionlessspecifications: double stage, double cylinder capacity 9 cfm maxworking pressure of 15 kgm2orifice meter with manometercapacity 145 liters with safety valvedigital temperature indicator from 0 to 199.9 cmains indicator present
View Complete Details
Ask Latest Price & Details
Closed Circuit Pelton Wheel Turbine Test Rig 5 HP

Closed Circuit Pelton Wheel Turbine Test Rig 5 HP
  • Min. Order (MOQ) 1 Piece
advanced technocracy inc. is manufacturer, exporter & supplier of closed circuit pelton wheel turbine test rig 5 hpa. pelton wheeltype : impulsecapacity : 5hprated speed : 1000 rpmdischarge capacity : 750 litersminutesupply head : 50 metersbuckets : gun metalb. loading : rope brakematerial : cast irondrum size : 300 mm diameterc. supply pump setsize : 3 x 2 discharge : 750 litersminutemotor capacity : 15 hp, 3 phase, 400 volts, 50 hz, acmake : crisugnacoimbatorestarter for motor : star delta type- 3phase tccrompton maked. flow measurementmaterial : c.i bodymanometer fluid : mercurye.pressure measurement pressure gaugef. rpm indicator : digitalg. sump tankmaterial of construction : ms powder coating m.s. frp linings.s unitservice required : electrical supply-15 hp,
View Complete Details
Ask Latest Price & Details
Centrifugal Blower Test Rig

Centrifugal Blower Test Rig
  • Min. Order (MOQ) 1 Piece
Features:Superior performanceSturdy constructionFlawless finishDurable finish standards This equipment comprises of a FD Fan Centrifugal Blower coupled to a DC Motor. Three interchangeable impellers with forward, backward and radial vanes are provided with the test rig. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Blower.
View Complete Details
Ask Latest Price & Details
Multi Stage Air Compressor Test Rig

Multi Stage Air Compressor Test Rig
  • Min. Order (MOQ) 1 Piece
Our company is placed among the foremost manufacturer, exporter and supplier of the multi stage air compressor test rig. Our team of our deft experts manufacture this rig by using excellent quality components with the improvisation of contemporary techniques with set industry norms. The rig provided by us is basically used to test the air compression in multiple stages. In addition, the offered multi stage air compressor test rig is rigorously tested by our quality experts on predefined quality parameters to deliver a flawless range towards the client's end.Features:superior strengthfine finishdurable performanceaccurate measurement specification:a. Motor : 5 h.p., with torque measurementb. Compressor : 2 cylinderc. Pressure : 10 kgcm2d. Flow measurement : orifice meter accessories:control panel consists of starter, energy meter, pressure gauge (2 nos.).
View Complete Details
Ask Latest Price & Details
Closed Circuit Francis Turbine Test Rig 5 HP Capacity

Closed Circuit Francis Turbine Test Rig 5 HP Capacity
  • Min. Order (MOQ) 1 Piece
Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Closed Circuit Francis Turbine Test Rig 5 HP CapacityA. Francis TurbineType : Inward Flow Reaction TurbineCapacity : 5 HPRated Speed : 1250 RPMDischarge Capacity : 1800 LitersMinuteSupply Head : 25 MetersGuide Vanes : Gun Metal Vanes (Aerofoil Blade Shaped)B. Loading Rope BrakeMaterial :Cast IronDrum Size :300 mm diameterC. Supply Pump SetSize : 4 X 4Discharge :: 1800 LitersMinuteTotal Head : 30 MetersMotor Capacity : 15 HPMake : CRISugnaCoimbatoreStarter for Motor : S t a r D e l t a - TCCrompton MakeD. Flow MeasurementMaterial : C.I BodyManometer Fluid : MercuryE. Pressure Measurement Pressure & Vacuum gaugeF. RPM Indicator G. Sump Tank : DigitalMaterial of Construction M.S. FRP : MS Powder Coating
View Complete Details
Ask Latest Price & Details
Water Meter Test Rig

Water Meter Test Rig
  • Min. Order (MOQ) 1 Piece
advanced technocracy inc. is manufacturer, exporter & supplier of water meter test rig.pump:0.5 hp, 1ph, monoblock, make: kirloskar cricgequavalant sump tank: 1000 x 300 x 400 mm, ss304 or ms with frp coatcollecting tank:300 x 300 x 400 mm, ss304 or ms with frp coatflow meter:a turbine type flow meter 1" x 1" piezometer:a graduated glass tube ( graduation in cm)experimental capability:actual & theoretical discharge, co-efficient of discharge manual:self explanatory instruction manual with sample calculation
View Complete Details
Ask Latest Price & Details
Gear Pump Test Rig

Gear Pump Test Rig
  • Min. Order (MOQ) 1 Piece
We are offering gear pump test rig.Features:closed loop circulationcompact & stand alone set upsuperb painted structuresimple to operate & maintainthe setup is designed to study the performance of gear pump.Set up consists of a gear pump having a pair of meshed gears coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop oil circulation. Pressure and vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. Utilities required:electric supply provide 230 +- 10 vac, 50 hz, single phase electric supply with proper earthing. (neutral earth voltage less than 5 vac.) 5a, three pin socket with switch for pump.Oil supply oil @ 30 liters technical details:product gear pump test rig gear pump test rig product code hml-02 acdcpump gear pump with pair of meshed gears, capacity 1 hp , speed 1500 rpm (max.), head 5 kgcm2 (max.) drive ac : ac motor with step cone pulley arrangement for 3 prefixed speeddc : dc motor with dc drive along with non-contact type digital rpm indicator supply tank capacity 30 ltrs. Moc ssmeasuring tank capacity 20 ltrs. Moc ss fitted with piezometer tube & scalepiping gi pvc
View Complete Details
Ask Latest Price & Details
Kaplan Turbine Test Rig

Kaplan Turbine Test Rig
  • Min. Order (MOQ) 1 Piece
We are offering Kaplan Turbine Test Rig.Features:Accurate resultsEasy maintenanceRobust constructionSimple to operateKaplan Turbine is an axial flow reaction turbine named in honour of Dr. B. Kaplan, a German Engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the J discharge (Q) must increase to produce the same power.Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. A draft tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.
View Complete Details
Ask Latest Price & Details
Closed Circuit Calibration Test Rig For Measuring Discharge Of Water Through Rota Meter

Closed Circuit Calibration Test Rig For Measuring Discharge Of Water Through Rota Meter
  • Min. Order (MOQ) 1 Piece
Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Closed Circuit Calibration Test Rig for Measuring Discharge of Water Through Rota Meter.Rota Meter:Two Rota meters of size 20mm & 25mm for flow measurement fitted with respective pipeline Measuring Tank:M.S. Powder CoatingM.S.FRP LiningS.S. Unit Measuring Tank of suitable size provided with overflow arrangement and a drain valve. Sump Tank:M.S. Powder Coating MS.FRP LiningSS. Unit of suitable size for suitable to store sufficient water for independent circulation through the unit for experimentation and arranged within the floor space of the Main unit Supply Pump Set:Supply Pump set to pump water from the sump to the unit through proper piping system with a gate valve to control the rate of flow and connected with a suitable switch. Switch & Starter:Single phase main switch Frame work Mounting:Rigid M.S. Frame work, Compactly fitted with all the above items, as a self sufficient package unit, suitable for operation without and foundation. Services Required:Single phase power supply 200220V & water to fill up sump Tank.
View Complete Details
Ask Latest Price & Details
Centrifugal Pump Test Rig

Centrifugal Pump Test Rig
The Centrifugal Pump Test Rig is designed by us to allow students and researchers to study the performance of centrifugal pump. The set up consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided. Objectives
  • To determine overall efficiency and pump efficiency of the centrifugal pump.
  • To plot Head vs. Discharge, Pump efficiency vs. Discharge.
Salient Features
  • Closed loop water circulation
  • Compact & stand alone set up
  • Stainless Steel tanks and wetted parts
  • Superb Painted structure
  • Simple to operate & maintain
Utilities Required
  • Electric supply : Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral Earth voltage less than 5 VAC.) 5A, three pin socket with switch for pump.
  • Water supply : Tap water connection BSP
  • Distilled water : @ 80 liters (optional)
Technical DetailProduct Centrifugal PumpTest Rig Pump Capacity 1 HP Speed 2800 RPM (max.), Head 12m(max.), Make Kirloskar Drive
  • AC motor with step cone pulley arrangement for 3 prefixed speed
  • DC motor with DC drive along with non-contact type digital RPM indicator
Supply Tank Capacity 120 Ltrs. MOC SS Measuring Tank Capacity 75 Ltrs. MOC SS fitted with Piezometer Tube & scale Piping GI / PVC Stop Watch Electronic Control Panel With required electrical instrumentation
View Complete Details
Ask Latest Price & Details
Pelton Wheel Turbine Test Rig

Pelton Wheel Turbine Test Rig
We design the pelton wheel turbine test rig as per the set scientific principles and used to check the impulse water turbine named in honor of sir l.a. Pelton (1829- 1908) of california, usa. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the inlet of the turbine is only kinetic energy. The pressure at the inlet and outlet of the turbine is atmospheric. This turbine is used for high heads. the present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through ss nozzle with a ss spear, by means of centrifugal pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central ss shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid ms structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine. objectives
  • to study the operation of a pelton wheel turbine
  • to determine the output power of pelton wheel turbine
  • to determine the turbine efficiency
utilities required
  • water supply and drain
  • electricity 15 kw, 440v ac, three phase
  • floor area 1.5 x 0.75 m
View Complete Details
Ask Latest Price & Details
Turbine Test Rig

Turbine Test Rig
We are offering kaplan turbine test rig.kaplan turbine test rig is designed by us to check the operation, efficiency and power output of a kaplan turbine. The turbine is an axial flow reaction turbine named in honor of dr. B. Kaplan, a german engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to qh. As the head (h) decreases the j discharge (q) must increase to produce the same power. the set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of centrifugal pump. The runner is directly mounted on one end of a central ss shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. A draft tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine. objectives
  • to study the operation of kaplan turbine.
  • to determine the output power of kaplan turbine.
  • to determine the turbine efficiency.
utilities required
  • water supply & drain.
  • electricity 20 kw, 440v ac, three phase.
  • floor area 1.5x0.75 m.
technical detailmodel at 11 (3 hp) at 11 (2 hp) at 11 (1hp) output power 3 hp 2 hp 1 hp discharge 5000 lpm (approx.) 4000 lpm (approx.) 3500 lpm (approx.) supply head 8 m 6 m 5 m rope brake type dynamometer dia 300 mm. dia 200 mm. dia 200 mm. sump tank capacity 600 ltrs. capacity 460 ltrs. capacity 400 ltrs. water circulation centrifugal pump capacity 15 hp three phase. capacity 10 hp three phase. capacity 7.5 hp three phase. speed 1500 rpm (approx.) runner with adjustable curved vanes discharge measurement pitot tube with manometer. control panel starter, mains indicator with digital techometer tanks will be made of stainless steel the whole set-up is well designed and arranged in a good quality painted structure
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.